component
ISOW7841FDWER
Public Made by Adomby adom
Texas Instruments Digital Isolators (With Power), SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
isow7841fdwer: laser-etched CAD + chip hero (factory 2.0.0 backfill)
4ee5311
ISOW7841FDWER
Texas Instruments · Digital Isolators (With Power) · SOIC-16-300mil
ISOW7841FDWER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input to primary side, recommended operating range 3V to 5.5V, powers primary side circuits and DC-DC converter. |
| 2 | GND1 | power_in | Ground connection for VCC supply. |
| 3 | INA | input | Input channel A, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 4 | INB | input | Input channel B, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 5 | INC | input | Input channel C, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 6 | OUTD | output | Output channel D, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 7 | NC | unconnected | No connection. |
| 8 | GND1 | power_in | Ground connection for VCC supply. |
| 9 | GND2 | power_in | Ground connection for VISO isolated power supply. |
| 10 | SEL | input | VISO selection input; tie to VISO for 5V output, tie to GND2 or leave open for 3.3V output. |
| 11 | IND | input | Input channel D, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 12 | OUTC | output | Output channel C, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 13 | OUTB | output | Output channel B, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 14 | OUTA | output | Output channel A, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 15 | GND2 | power_in | Ground connection for VISO isolated power supply. |
| 16 | VISO | power_out | Isolated power supply output, 3.3V or 5V selectable via SEL pin, capable of supplying up to 130 mA to isolated side loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ISOW7841FDWER - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
isow7841fdwer-etched.step/isow7841fdwer-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isow7841fdwer.step/isow7841fdwer.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (58 pp, sha256
d52d56a624a0bade, retrieved 2026-09-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISOW7841FDWER
**Texas Instruments** · Digital Isolators (With Power) · SOIC-16-300mil
ISOW7841FDWER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input to primary side, recommended operating range 3V to 5.5V, powers primary side circuits and DC-DC converter. |
| 2 | GND1 | power_in | Ground connection for VCC supply. |
| 3 | INA | input | Input channel A, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 4 | INB | input | Input channel B, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 5 | INC | input | Input channel C, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 6 | OUTD | output | Output channel D, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 7 | NC | unconnected | No connection. |
| 8 | GND1 | power_in | Ground connection for VCC supply. |
| 9 | GND2 | power_in | Ground connection for VISO isolated power supply. |
| 10 | SEL | input | VISO selection input; tie to VISO for 5V output, tie to GND2 or leave open for 3.3V output. |
| 11 | IND | input | Input channel D, accepts CMOS logic levels with 0 to 0.3×VSI for low and 0.7×VSI to VSI for high. |
| 12 | OUTC | output | Output channel C, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 13 | OUTB | output | Output channel B, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 14 | OUTA | output | Output channel A, drives 0.2 to 0.4V low and VSO-0.2V high with ±4 mA drive capability at 5V output. |
| 15 | GND2 | power_in | Ground connection for VISO isolated power supply. |
| 16 | VISO | power_out | Isolated power supply output, 3.3V or 5V selectable via SEL pin, capable of supplying up to 130 mA to isolated side loads. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `ISOW7841FDWER`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `isow7841fdwer-etched.step` / `isow7841fdwer-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isow7841fdwer.step` / `isow7841fdwer.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/isow7841) (58 pp, sha256 `d52d56a624a0bade`, retrieved 2026-09-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isow7841fdwer-datasheet.pdf)