main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers isow7742qdfmrq1: viewers · Ray
isow7742qdfmrq1-etched.glb Publish 0.1.0 · Ray
isow7742qdfmrq1-etched.step isow7742qdfmrq1: factory component page (tier=mfr) · Ray
isow7742qdfmrq1-hero.glb isow7742qdfmrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
isow7742qdfmrq1-hero.overlay.json Publish 0.1.0 · Ray
isow7742qdfmrq1.glb Publish 0.1.0 · Ray
isow7742qdfmrq1.kicad_mod Publish 0.1.0 · Ray
isow7742qdfmrq1.kicad_sym Publish 0.1.0 · Ray
isow7742qdfmrq1.lbr Publish 0.1.0 · Ray
isow7742qdfmrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 20 pins · Ray

ISOW7742QDFMRQ1

Texas Instruments · Digital Isolators With Power · SOIC-20

ISOW7742QDFMRQ1 from Texas Instruments, in a SOIC-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIO power_in Side 1 logic supply, specified from 1.71 V to 5.5 V.
2 INA input Input channel A.
3 INB input Input channel B.
4 OUTC output Output channel C.
5 OUTD output Output channel D.
6 GNDIO power_in Ground connection for VIO; GND1 and GNDIO must be shorted on board.
7 EN_IO1 input Output enable 1: when low, side 1 channel outputs are high impedance and side 1 channel input transmitters are disabled.
8 EN/FLT bidirectional Multi-function pin: DC-DC enable input (high to VIO enables the converter) or active-low fault output that needs a 5 kΩ or greater pull-up; it can be used as only one of these.
9 VDD power_in Side 1 DC-DC converter power supply, specified from 3 V to 5.5 V.
10 GND1 power_in Ground connection for VDD; GND1 and GNDIO must be shorted on board.
11 GND2 power_in Ground connection for VISOOUT; can be shorted to GISOIN or connected through a ferrite bead.
12 VISOOUT power_out Isolated power converter output voltage, selected as 5 V or 3.3 V by VSEL; can be shorted to VISOIN or connected through a ferrite bead.
13 VSEL input VISOOUT selection: VISOOUT is 5 V when VSEL is shorted to VISOOUT and 3.3 V when shorted to GND2.
14 EN_IO2 input Output enable 2: when low, side 2 channel outputs are high impedance and side 2 channel input transmitters are disabled.
15 GISOIN power_in Ground connection for VISOIN; can be shorted to GND2 or connected through a ferrite bead.
16 IND input Input channel D.
17 INC input Input channel C.
18 OUTB output Output channel B.
19 OUTA output Output channel A.
20 VISOIN power_in Side 2 supply voltage for the isolation channels; can be shorted to VISOOUT or connected through a ferrite bead.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20
Category Signal Isolation Devices
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power converter supply voltage VDD -0.5 6 V 6
Isolated supply voltage, input supply for secondary side VISOIN -0.5 6 V 6
Isolated supply voltage, power converter output VISOOUT -0.5 4 V VSEL shorted to GND2 6
Isolated supply voltage, power converter output VISOOUT -0.5 6 V VSEL shorted to VISOOUT 6
Primary side logic supply voltage VIO -0.5 6 V 6
Maximum output current through data channels IO -15 15 mA 6
Junction temperature TJ -40 150 °C 6
Storage temperature Tstg -65 150 °C 6
Power converter supply voltage VDD 2.97 3.3 3.63 V 3.3 V operation 7
Power converter supply voltage VDD 4.5 5 5.5 V 5 V operation 7
Channel logic supply voltage VIO, VISOIN 1.71 1.89 V 1.8 V operation 7
Channel logic supply voltage VIO, VISOIN 2.25 5.5 V 2.5 V, 3.3 V, and 5 V operation 7
Data rate DR 100 Mbps 7
Channel isolator ready after power up or EN/FLT high tPWRUP 5 ms VISOIN > VIO(UVLO+) 7
Ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance RθJA 68.5 °C/W DFM (SOIC) 20 pins 8
Junction-to-case (top) thermal resistance RθJC(top) 24.6 °C/W DFM (SOIC) 20 pins 8
Junction-to-board thermal resistance RθJB 53.7 °C/W DFM (SOIC) 20 pins 8
Isolated supply voltage VISOOUT 4.75 5 5.25 V VDD = 5 V, VSEL = VISOOUT, External IISOOUT = 0 to 55 mA 11
Isolated supply voltage VISOOUT 4.5 5 5.25 V VDD = 5 V, VSEL = VISOOUT, External IISOOUT = 0 to 110 mA 11
Isolated supply voltage VISOOUT 3.135 3.3 3.465 V VDD = 5 V, VSEL = GND2, External IISOOUT = 0 to 140 mA 11
Power converter supply current, disabled IDD 0.28 0.45 mA EN/FLT = GND1, VISOOUT = No ILOAD 12
Power converter supply current input IDD 225 316 mA VDD = 5 V, VSEL = VISOOUT, ILOAD = 110 mA 12
Power converter output current IISOOUT 110 mA VDD = 5 V, VSEL = VISOOUT 12
Power converter output current IISOOUT 140 mA VDD = 5 V, VSEL = GND2 12
Power converter output current IISOOUT 60 mA VDD = 3.3 V, VSEL = GND2 12
Low level input current IIL -25 µA VIL = 0 at INx 13
High level input current IIH 25 µA VIH = VSI at INx 13
Low level output voltage VOL 0.4 V IO = 4 mA, VIO, VISOIN = 5 V 13
Common mode transient immunity CMTI 85 100 kV/us VI = VSI or 0 V, VCM = 1000 V 13
Supply current, DC signal IDD_IO 3.1 4.7 mA ISOW7742-Q1, VIO, VISOIN = 5 V, EN_IO1 = EN_IO2 = VCCI; VI = VCCI 13
Supply current, DC signal IISOIN 3.9 5.6 mA ISOW7742-Q1, VIO, VISOIN = 5 V, EN_IO1 = EN_IO2 = VCCI; VI = VCCI 13
Supply current, AC signal 100 Mbps IDD_IO 16.7 20 mA ISOW7742-Q1, VIO, VISOIN = 5 V, all channels switching, CL = 15 pF 14
Supply current, AC signal 100 Mbps IISOIN 17.33 22 mA ISOW7742-Q1, VIO, VISOIN = 5 V, all channels switching, CL = 15 pF 14
Propagation delay time tPLH, tPHL 7.6 10.7 15.7 ns 5-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms 21
Pulse width distortion PWD 0.9 5 ns 5-V supply, /tPHL, tPLH/ 21
Part-to-part skew time tsk(pp) 5.5 ns 5-V supply 21
Propagation delay time tPLH, tPHL 6 11 16.2 ns 3.3-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms 22
Propagation delay time tPLH, tPHL 7.5 12 18 ns 2.5-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms 23
Propagation delay time tPLH, tPHL 7.5 15 21.5 ns 1.8-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms 24

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the 45

CAD (KiCad official)

  • Symbol: ISOW7742QDFMRQ1
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20 (KiCad packages3D, STEP)
  • 3D model files: isow7742qdfmrq1-etched.step / isow7742qdfmrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isow7742qdfmrq1.step / isow7742qdfmrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (59 pp, sha256 5f94cde786001b58, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF