3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownISOW7742QDFMRQ1
Texas Instruments · Digital Isolators With Power · SOIC-20
ISOW7742QDFMRQ1 from Texas Instruments, in a SOIC-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIO | power_in | Side 1 logic supply, specified from 1.71 V to 5.5 V. |
| 2 | INA | input | Input channel A. |
| 3 | INB | input | Input channel B. |
| 4 | OUTC | output | Output channel C. |
| 5 | OUTD | output | Output channel D. |
| 6 | GNDIO | power_in | Ground connection for VIO; GND1 and GNDIO must be shorted on board. |
| 7 | EN_IO1 | input | Output enable 1: when low, side 1 channel outputs are high impedance and side 1 channel input transmitters are disabled. |
| 8 | EN/FLT | bidirectional | Multi-function pin: DC-DC enable input (high to VIO enables the converter) or active-low fault output that needs a 5 kΩ or greater pull-up; it can be used as only one of these. |
| 9 | VDD | power_in | Side 1 DC-DC converter power supply, specified from 3 V to 5.5 V. |
| 10 | GND1 | power_in | Ground connection for VDD; GND1 and GNDIO must be shorted on board. |
| 11 | GND2 | power_in | Ground connection for VISOOUT; can be shorted to GISOIN or connected through a ferrite bead. |
| 12 | VISOOUT | power_out | Isolated power converter output voltage, selected as 5 V or 3.3 V by VSEL; can be shorted to VISOIN or connected through a ferrite bead. |
| 13 | VSEL | input | VISOOUT selection: VISOOUT is 5 V when VSEL is shorted to VISOOUT and 3.3 V when shorted to GND2. |
| 14 | EN_IO2 | input | Output enable 2: when low, side 2 channel outputs are high impedance and side 2 channel input transmitters are disabled. |
| 15 | GISOIN | power_in | Ground connection for VISOIN; can be shorted to GND2 or connected through a ferrite bead. |
| 16 | IND | input | Input channel D. |
| 17 | INC | input | Input channel C. |
| 18 | OUTB | output | Output channel B. |
| 19 | OUTA | output | Output channel A. |
| 20 | VISOIN | power_in | Side 2 supply voltage for the isolation channels; can be shorted to VISOOUT or connected through a ferrite bead. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20 |
| Category | Signal Isolation Devices |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power converter supply voltage | VDD | -0.5 | 6 | V | 6 | ||
| Isolated supply voltage, input supply for secondary side | VISOIN | -0.5 | 6 | V | 6 | ||
| Isolated supply voltage, power converter output | VISOOUT | -0.5 | 4 | V | VSEL shorted to GND2 | 6 | |
| Isolated supply voltage, power converter output | VISOOUT | -0.5 | 6 | V | VSEL shorted to VISOOUT | 6 | |
| Primary side logic supply voltage | VIO | -0.5 | 6 | V | 6 | ||
| Maximum output current through data channels | IO | -15 | 15 | mA | 6 | ||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Power converter supply voltage | VDD | 2.97 | 3.3 | 3.63 | V | 3.3 V operation | 7 |
| Power converter supply voltage | VDD | 4.5 | 5 | 5.5 | V | 5 V operation | 7 |
| Channel logic supply voltage | VIO, VISOIN | 1.71 | 1.89 | V | 1.8 V operation | 7 | |
| Channel logic supply voltage | VIO, VISOIN | 2.25 | 5.5 | V | 2.5 V, 3.3 V, and 5 V operation | 7 | |
| Data rate | DR | 100 | Mbps | 7 | |||
| Channel isolator ready after power up or EN/FLT high | tPWRUP | 5 | ms | VISOIN > VIO(UVLO+) | 7 | ||
| Ambient temperature | TA | -40 | 125 | °C | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 68.5 | °C/W | DFM (SOIC) 20 pins | 8 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.6 | °C/W | DFM (SOIC) 20 pins | 8 | ||
| Junction-to-board thermal resistance | RθJB | 53.7 | °C/W | DFM (SOIC) 20 pins | 8 | ||
| Isolated supply voltage | VISOOUT | 4.75 | 5 | 5.25 | V | VDD = 5 V, VSEL = VISOOUT, External IISOOUT = 0 to 55 mA | 11 |
| Isolated supply voltage | VISOOUT | 4.5 | 5 | 5.25 | V | VDD = 5 V, VSEL = VISOOUT, External IISOOUT = 0 to 110 mA | 11 |
| Isolated supply voltage | VISOOUT | 3.135 | 3.3 | 3.465 | V | VDD = 5 V, VSEL = GND2, External IISOOUT = 0 to 140 mA | 11 |
| Power converter supply current, disabled | IDD | 0.28 | 0.45 | mA | EN/FLT = GND1, VISOOUT = No ILOAD | 12 | |
| Power converter supply current input | IDD | 225 | 316 | mA | VDD = 5 V, VSEL = VISOOUT, ILOAD = 110 mA | 12 | |
| Power converter output current | IISOOUT | 110 | mA | VDD = 5 V, VSEL = VISOOUT | 12 | ||
| Power converter output current | IISOOUT | 140 | mA | VDD = 5 V, VSEL = GND2 | 12 | ||
| Power converter output current | IISOOUT | 60 | mA | VDD = 3.3 V, VSEL = GND2 | 12 | ||
| Low level input current | IIL | -25 | µA | VIL = 0 at INx | 13 | ||
| High level input current | IIH | 25 | µA | VIH = VSI at INx | 13 | ||
| Low level output voltage | VOL | 0.4 | V | IO = 4 mA, VIO, VISOIN = 5 V | 13 | ||
| Common mode transient immunity | CMTI | 85 | 100 | kV/us | VI = VSI or 0 V, VCM = 1000 V | 13 | |
| Supply current, DC signal | IDD_IO | 3.1 | 4.7 | mA | ISOW7742-Q1, VIO, VISOIN = 5 V, EN_IO1 = EN_IO2 = VCCI; VI = VCCI | 13 | |
| Supply current, DC signal | IISOIN | 3.9 | 5.6 | mA | ISOW7742-Q1, VIO, VISOIN = 5 V, EN_IO1 = EN_IO2 = VCCI; VI = VCCI | 13 | |
| Supply current, AC signal 100 Mbps | IDD_IO | 16.7 | 20 | mA | ISOW7742-Q1, VIO, VISOIN = 5 V, all channels switching, CL = 15 pF | 14 | |
| Supply current, AC signal 100 Mbps | IISOIN | 17.33 | 22 | mA | ISOW7742-Q1, VIO, VISOIN = 5 V, all channels switching, CL = 15 pF | 14 | |
| Propagation delay time | tPLH, tPHL | 7.6 | 10.7 | 15.7 | ns | 5-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms | 21 |
| Pulse width distortion | PWD | 0.9 | 5 | ns | 5-V supply, /tPHL, tPLH/ | 21 | |
| Part-to-part skew time | tsk(pp) | 5.5 | ns | 5-V supply | 21 | ||
| Propagation delay time | tPLH, tPHL | 6 | 11 | 16.2 | ns | 3.3-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms | 22 |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 18 | ns | 2.5-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms | 23 |
| Propagation delay time | tPLH, tPHL | 7.5 | 15 | 21.5 | ns | 1.8-V supply, see Switching Characteristics Test Circuit and Voltage Waveforms | 24 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the | 45 |
CAD (KiCad official)
- Symbol:
ISOW7742QDFMRQ1 - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20 (KiCad packages3D, STEP)
- 3D model files:
isow7742qdfmrq1-etched.step/isow7742qdfmrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isow7742qdfmrq1.step/isow7742qdfmrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
5f94cde786001b58, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).