Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7831FDWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7831FDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1, specified at 2.25 V to 5.5 V in the recommended operating conditions. |
| 2 | GND1 | power_in | Ground connection for VCC1 (side 1). |
| 3 | INA | input | Logic input for channel A on side 1; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI. |
| 4 | INB | input | Logic input for channel B on side 1; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI. |
| 5 | OUTC | output | Output of channel C on side 1; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V. |
| 6 | NC | unconnected | Not connected. |
| 7 | EN1 | input | Output enable for side 1: side 1 outputs are enabled when EN1 is high or open and are high-impedance when EN1 is low. |
| 8 | GND1 | power_in | Ground connection for VCC1 (side 1). |
| 9 | GND2 | power_in | Ground connection for VCC2 (side 2). |
| 10 | EN2 | input | Output enable for side 2: side 2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low. |
| 11 | NC | unconnected | Not connected. |
| 12 | INC | input | Logic input for channel C on side 2; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI. |
| 13 | OUTB | output | Output of channel B on side 2; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V. |
| 14 | OUTA | output | Output of channel A on side 2; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V. |
| 15 | GND2 | power_in | Ground connection for VCC2 (side 2). |
| 16 | VCC2 | power_in | Power supply for side 2, specified at 2.25 V to 5.5 V in the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | Voltages with respect to local ground (GND1/GND2) | 4 | |
| Voltage at INx, OUTx, or ENx | V | -0.5 | V | Max is VCCx + 0.5 (must not exceed 6V) | 4 | ||
| Output current | IO | -15 | 15 | mA | 4 | ||
| Junction temperature | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 4 | ||
| High-level output current | IOH | -4 | mA | VCCO = 5V | 4 | ||
| High-level output current | IOH | -2 | mA | VCCO = 3.3V | 4 | ||
| High-level output current | IOH | -1 | mA | VCCO = 2.5V | 4 | ||
| Low-level output current | IOL | 4 | mA | VCCO = 5V | 4 | ||
| Low-level output current | IOL | 2 | mA | VCCO = 3.3V | 4 | ||
| Low-level output current | IOL | 1 | mA | VCCO = 2.5V | 4 | ||
| Low-level input voltage | VIL | 0 | V | Max is 0.3 × VCCI | 4 | ||
| Signaling rate | DR | 0 | 100 | Mbps | 4 | ||
| Ambient temperature | TA | -55 | 25 | 125 | °C | 4 | |
| High-level output voltage | VOL | 0.2 | 0.4 | V | VCC = 5V ±10%; IOL = 4mA; see Figure 6-1 | 8 | |
| High-level input current | IIH | 10 | µA | VCC = 5V ±10%; VIH = VCCI at INx or ENx | 8 | ||
| Low-level input current | IIL | -10 | µA | VCC = 5V ±10%; VIL = 0V at INx or ENx | 8 | ||
| Common-mode transient immunity | CMTI | 100 | kV/μs | VCC = 5V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 | 8 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC = 3.3V ±10%; IOL = 2mA; see Figure 6-1 | 9 | |
| High-level input current | IIH | 10 | µA | VCC = 3.3V ±10%; VIH = VCCI at INx or ENx | 9 | ||
| Low-level input current | IIL | -10 | µA | VCC = 3.3V ±10%; VIL = 0V at INx or ENx | 9 | ||
| Common-mode transient immunity | CMTI | 100 | kV/μs | VCC = 3.3V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 | 9 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC = 2.5V ±10%; IOL = 1mA; see Figure 6-1 | 10 | |
| High-level input current | IIH | 10 | µA | VCC = 2.5V ±10%; VIH = VCCI at INx or ENx | 10 | ||
| Low-level input current | IIL | -10 | µA | VCC = 2.5V ±10%; VIL = 0V at INx or ENx | 10 | ||
| Common-mode transient immunity | CMTI | 100 | kV/μs | VCC = 2.5V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 | 10 | ||
| Propagation delay time | tPLH, tPHL | 6 | 11 | 16 | ns | VCC = 5V ±10%; see Figure 6-1 | 11 |
| Disable propagation delay, high-to-high impedance output | tPHZ | 12 | 20 | ns | VCC = 5V ±10%; see Figure 6-2 | 11 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 12 | 20 | ns | VCC = 5V ±10%; see Figure 6-2 | 11 | |
| Enable propagation delay, high impedance-to-high output for ISO7831F | tPZH | 2 | 2.5 | µs | VCC = 5V ±10%; see Figure 6-2 | 11 | |
| Enable propagation delay, high impedance-to-low output for ISO7831F | tPZL | 10 | 20 | ns | VCC = 5V ±10%; see Figure 6-2 | 11 | |
| Default output delay time from input power loss | tDO | 0.2 | 9 | µs | VCC = 5V ±10%; measured from VCC below 1.7V; see Figure 6-3 | 11 | |
| Propagation delay time | tPLH, tPHL | 6 | 10.8 | 16 | ns | VCC = 3.3V ±10%; see Figure 6-1 | 11 |
| Disable propagation delay, high-to-high impedance output | tPHZ | 17 | 32 | ns | VCC = 3.3V ±10%; see Figure 6-2 | 11 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 17 | 32 | ns | VCC = 3.3V ±10%; see Figure 6-2 | 11 | |
| Enable propagation delay, high impedance-to-low output for ISO7831F | tPZL | 17 | 32 | ns | VCC = 3.3V ±10%; see Figure 6-2 | 11 | |
| Propagation delay time | tPLH, tPHL | 7.5 | 11.7 | 17.5 | ns | VCC = 2.5V ±10%; see Figure 6-1 | 12 |
| Disable propagation delay, high-to-high impedance output | tPHZ | 22 | 45 | ns | VCC = 2.5V ±10%; see Figure 6-2 | 12 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 22 | 45 | ns | VCC = 2.5V ±10%; see Figure 6-2 | 12 | |
| Enable propagation delay, high impedance-to-high output for ISO7831F | tPZH | 2 | 2.5 | µs | VCC = 2.5V ±10%; see Figure 6-2 | 12 | |
| Enable propagation delay, high impedance-to-low output for ISO7831F | tPZL | 18 | 45 | ns | VCC = 2.5V ±10%; see Figure 6-2 | 12 | |
| Default output delay time from input power loss | tDO | 0.2 | 9 | µs | VCC = 2.5V ±10%; measured from VCC below 1.7V; see Figure 6-3 | 12 | |
| Supply current - disable (ICC1) | ICC1 | 1 | 1.6 | mA | VCC = 5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 8 | |
| Supply current - disable (ICC2) | ICC2 | 0.8 | 1.3 | mA | VCC = 5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 8 | |
| Supply current - AC signal 100Mbps (ICC1) | ICC1 | 8.7 | 10.5 | mA | VCC = 5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 8 | |
| Supply current - AC signal 100Mbps (ICC2) | ICC2 | 13.2 | 15.8 | mA | VCC = 5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 8 | |
| Supply current - disable (ICC1) | ICC1 | 1 | 1.6 | mA | VCC = 3.3V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 9 | |
| Supply current - disable (ICC2) | ICC2 | 0.8 | 1.3 | mA | VCC = 3.3V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 9 | |
| Supply current - AC signal 100Mbps (ICC1) | ICC1 | 6.9 | 8.3 | mA | VCC = 3.3V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 9 | |
| Supply current - AC signal 100Mbps (ICC2) | ICC2 | 10.1 | 12.2 | mA | VCC = 3.3V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 9 | |
| Supply current - disable (ICC1) | ICC1 | 0.9 | 1.6 | mA | VCC = 2.5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 10 | |
| Supply current - disable (ICC2) | ICC2 | 0.8 | 1.3 | mA | VCC = 2.5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) | 10 | |
| Supply current - AC signal 100Mbps (ICC1) | ICC1 | 5.8 | 7.2 | mA | VCC = 2.5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 10 | |
| Supply current - AC signal 100Mbps (ICC2) | ICC2 | 8.2 | 10 | mA | VCC = 2.5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps | 10 | |
| Junction-to-ambient thermal resistance (DW) | RθJA | 81.1 | °C/W | DW (SOIC) 16 pins | 5 |
CAD (KiCad official)
- Symbol:
ISO7831FDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7831fdwr-etched.step/iso7831fdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7831fdwr.step/iso7831fdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
9a94ebd5660d4fbf, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).