Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO7831FDWR

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISO7831FDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply for side 1, specified at 2.25 V to 5.5 V in the recommended operating conditions.
2 GND1 power_in Ground connection for VCC1 (side 1).
3 INA input Logic input for channel A on side 1; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI.
4 INB input Logic input for channel B on side 1; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI.
5 OUTC output Output of channel C on side 1; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V.
6 NC unconnected Not connected.
7 EN1 input Output enable for side 1: side 1 outputs are enabled when EN1 is high or open and are high-impedance when EN1 is low.
8 GND1 power_in Ground connection for VCC1 (side 1).
9 GND2 power_in Ground connection for VCC2 (side 2).
10 EN2 input Output enable for side 2: side 2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low.
11 NC unconnected Not connected.
12 INC input Logic input for channel C on side 2; VIH is at least 0.7 × VCCI and VIL is at most 0.3 × VCCI.
13 OUTB output Output of channel B on side 2; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V.
14 OUTA output Output of channel A on side 2; output current is limited to 4 mA at VCCO = 5 V, 2 mA at 3.3 V, and 1 mA at 2.5 V.
15 GND2 power_in Ground connection for VCC2 (side 2).
16 VCC2 power_in Power supply for side 2, specified at 2.25 V to 5.5 V in the recommended operating conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 -0.5 6 V Voltages with respect to local ground (GND1/GND2) 4
Voltage at INx, OUTx, or ENx V -0.5 V Max is VCCx + 0.5 (must not exceed 6V) 4
Output current IO -15 15 mA 4
Junction temperature TJ -55 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC1, VCC2 2.25 5.5 V 4
High-level output current IOH -4 mA VCCO = 5V 4
High-level output current IOH -2 mA VCCO = 3.3V 4
High-level output current IOH -1 mA VCCO = 2.5V 4
Low-level output current IOL 4 mA VCCO = 5V 4
Low-level output current IOL 2 mA VCCO = 3.3V 4
Low-level output current IOL 1 mA VCCO = 2.5V 4
Low-level input voltage VIL 0 V Max is 0.3 × VCCI 4
Signaling rate DR 0 100 Mbps 4
Ambient temperature TA -55 25 125 °C 4
High-level output voltage VOL 0.2 0.4 V VCC = 5V ±10%; IOL = 4mA; see Figure 6-1 8
High-level input current IIH 10 µA VCC = 5V ±10%; VIH = VCCI at INx or ENx 8
Low-level input current IIL -10 µA VCC = 5V ±10%; VIL = 0V at INx or ENx 8
Common-mode transient immunity CMTI 100 kV/μs VCC = 5V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 8
Low-level output voltage VOL 0.2 0.4 V VCC = 3.3V ±10%; IOL = 2mA; see Figure 6-1 9
High-level input current IIH 10 µA VCC = 3.3V ±10%; VIH = VCCI at INx or ENx 9
Low-level input current IIL -10 µA VCC = 3.3V ±10%; VIL = 0V at INx or ENx 9
Common-mode transient immunity CMTI 100 kV/μs VCC = 3.3V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 9
Low-level output voltage VOL 0.2 0.4 V VCC = 2.5V ±10%; IOL = 1mA; see Figure 6-1 10
High-level input current IIH 10 µA VCC = 2.5V ±10%; VIH = VCCI at INx or ENx 10
Low-level input current IIL -10 µA VCC = 2.5V ±10%; VIL = 0V at INx or ENx 10
Common-mode transient immunity CMTI 100 kV/μs VCC = 2.5V ±10%; VI = VCCI or 0V, VCM = 1500V; see Figure 6-4 10
Propagation delay time tPLH, tPHL 6 11 16 ns VCC = 5V ±10%; see Figure 6-1 11
Disable propagation delay, high-to-high impedance output tPHZ 12 20 ns VCC = 5V ±10%; see Figure 6-2 11
Disable propagation delay, low-to-high impedance output tPLZ 12 20 ns VCC = 5V ±10%; see Figure 6-2 11
Enable propagation delay, high impedance-to-high output for ISO7831F tPZH 2 2.5 µs VCC = 5V ±10%; see Figure 6-2 11
Enable propagation delay, high impedance-to-low output for ISO7831F tPZL 10 20 ns VCC = 5V ±10%; see Figure 6-2 11
Default output delay time from input power loss tDO 0.2 9 µs VCC = 5V ±10%; measured from VCC below 1.7V; see Figure 6-3 11
Propagation delay time tPLH, tPHL 6 10.8 16 ns VCC = 3.3V ±10%; see Figure 6-1 11
Disable propagation delay, high-to-high impedance output tPHZ 17 32 ns VCC = 3.3V ±10%; see Figure 6-2 11
Disable propagation delay, low-to-high impedance output tPLZ 17 32 ns VCC = 3.3V ±10%; see Figure 6-2 11
Enable propagation delay, high impedance-to-low output for ISO7831F tPZL 17 32 ns VCC = 3.3V ±10%; see Figure 6-2 11
Propagation delay time tPLH, tPHL 7.5 11.7 17.5 ns VCC = 2.5V ±10%; see Figure 6-1 12
Disable propagation delay, high-to-high impedance output tPHZ 22 45 ns VCC = 2.5V ±10%; see Figure 6-2 12
Disable propagation delay, low-to-high impedance output tPLZ 22 45 ns VCC = 2.5V ±10%; see Figure 6-2 12
Enable propagation delay, high impedance-to-high output for ISO7831F tPZH 2 2.5 µs VCC = 2.5V ±10%; see Figure 6-2 12
Enable propagation delay, high impedance-to-low output for ISO7831F tPZL 18 45 ns VCC = 2.5V ±10%; see Figure 6-2 12
Default output delay time from input power loss tDO 0.2 9 µs VCC = 2.5V ±10%; measured from VCC below 1.7V; see Figure 6-3 12
Supply current - disable (ICC1) ICC1 1 1.6 mA VCC = 5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 8
Supply current - disable (ICC2) ICC2 0.8 1.3 mA VCC = 5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 8
Supply current - AC signal 100Mbps (ICC1) ICC1 8.7 10.5 mA VCC = 5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 8
Supply current - AC signal 100Mbps (ICC2) ICC2 13.2 15.8 mA VCC = 5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 8
Supply current - disable (ICC1) ICC1 1 1.6 mA VCC = 3.3V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 9
Supply current - disable (ICC2) ICC2 0.8 1.3 mA VCC = 3.3V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 9
Supply current - AC signal 100Mbps (ICC1) ICC1 6.9 8.3 mA VCC = 3.3V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 9
Supply current - AC signal 100Mbps (ICC2) ICC2 10.1 12.2 mA VCC = 3.3V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 9
Supply current - disable (ICC1) ICC1 0.9 1.6 mA VCC = 2.5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 10
Supply current - disable (ICC2) ICC2 0.8 1.3 mA VCC = 2.5V ±10%; EN1 = EN2 = 0V, VI = 0V (Devices with suffix F) 10
Supply current - AC signal 100Mbps (ICC1) ICC1 5.8 7.2 mA VCC = 2.5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 10
Supply current - AC signal 100Mbps (ICC2) ICC2 8.2 10 mA VCC = 2.5V ±10%; all channels switching, square wave clock input; CL = 15pF; 100Mbps 10
Junction-to-ambient thermal resistance (DW) RθJA 81.1 °C/W DW (SOIC) 16 pins 5

CAD (KiCad official)

  • Symbol: ISO7831FDWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso7831fdwr-etched.step / iso7831fdwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7831fdwr.step / iso7831fdwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 9a94ebd5660d4fbf, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF