component
ISO7731DWR
Public Made by Adomby adom
Texas Instruments Digital Isolators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
iso7731dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
5864d54
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225
{
"slug": "iso7731dwr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Digital Isolators, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"signal isolation devices",
"iso7731dwr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"iso7731dwr.kicad_sym",
"iso7731dwr.kicad_mod",
"iso7731dwr.glb",
"iso7731dwr.step",
"iso7731dwr.lbr",
"docs/hero.png",
"docs/iso7731dwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "ISO7731DWR",
"manufacturer": "Texas Instruments",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Signal Isolation Devices",
"subcategory": "Digital Isolators",
"datasheet": "https://www.ti.com/cn/lit/gpn/iso7731",
"parts": {
"symbol": "iso7731dwr.kicad_sym",
"footprint": "iso7731dwr.kicad_mod",
"model_3d": "iso7731dwr-etched.glb",
"model_3d_plain": "iso7731dwr.glb",
"model_3d_step": "iso7731dwr-etched.step",
"model_3d_step_plain": "iso7731dwr.step",
"lbr": "iso7731dwr.lbr"
},
"distributor_links": {
"lcsc": "C524804"
},
"pins": [
{
"number": "1",
"name": "VCC1",
"type": "power_in",
"description": "Supply voltage input for side 1, rated 2.25V to 5.5V; requires 0.1µF bypass capacitor to GND1."
},
{
"number": "2",
"name": "GND1",
"type": "power_in",
"description": "Ground reference for VCC1 and input-side logic; keep within 2mm of VCC1 bypass capacitor."
},
{
"number": "3",
"name": "INA",
"type": "input",
"description": "Logic input channel A, accepts 0V to VCCI with threshold at 0.3×VCCI to 0.7×VCCI; internally pulled."
},
{
"number": "4",
"name": "INB",
"type": "input",
"description": "Logic input channel B, accepts 0V to VCCI with threshold at 0.3×VCCI to 0.7×VCCI; internally pulled."
},
{
"number": "5",
"name": "OUTC",
"type": "output",
"description": "Logic output channel C (inverted relative to INC); can source/sink ±15mA at 0V to VCCO with VOH min 0.4V below VCCO."
},
{
"number": "6",
"name": "NC",
"type": "unconnected",
"description": "Not connected internally; leave open or tie to ground on PCB design."
},
{
"number": "7",
"name": "EN1",
"type": "input",
"description": "Output enable for side 1; high or open enables OUTA output, low drives to high-impedance state."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Ground reference for VCC1 and input-side logic; keep within 2mm of VCC1 bypass capacitor."
},
{
"number": "9",
"name": "GND2",
"type": "power_in",
"description": "Ground reference for VCC2 and output-side logic; keep within 2mm of VCC2 bypass capacitor."
},
{
"number": "10",
"name": "EN2",
"type": "input",
"description": "Output enable for side 2; high or open enables OUTB and OUTC outputs, low drives to high-impedance state."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "Not connected internally; leave open or tie to ground on PCB design."
},
{
"number": "12",
"name": "INC",
"type": "input",
"description": "Logic input channel C, accepts 0V to VCCI with threshold at 0.3×VCCI to 0.7×VCCI; internally pulled."
},
{
"number": "13",
"name": "OUTB",
"type": "output",
"description": "Logic output channel B (non-inverted relative to INB); can source/sink ±15mA at 0V to VCCO with VOH min 0.4V below VCCO."
},
{
"number": "14",
"name": "OUTA",
"type": "output",
"description": "Logic output channel A (non-inverted relative to INA); can source/sink ±15mA at 0V to VCCO with VOH min 0.4V below VCCO."
},
{
"number": "15",
"name": "GND2",
"type": "power_in",
"description": "Ground reference for VCC2 and output-side logic; keep within 2mm of VCC2 bypass capacitor."
},
{
"number": "16",
"name": "VCC2",
"type": "power_in",
"description": "Supply voltage input for side 2, rated 2.25V to 5.5V; requires 0.1µF bypass capacitor to GND2."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: ISO7731 channel C is inverted (pin 5 OUTC is inverted relative to pin 12 INC), unlike ISO7730 where "
],
"pages_sent": 49,
"cost_usd": 0.4075,
"at": "2026-09-22T06:12:12"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/iso7731",
"pages": 49,
"sha256": "6d47a7b1277198b2",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "iso7731dwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "iso7731dwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "beb232947088c3735e5c3e5ef4a4a238ab060dd6d5a0868ab4cb4260d1a56b45",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}