main
History Download
Ray Publish 0.1.0 5099f38

ISO7310FCDR

Texas Instruments · Digital Isolators · SOIC-8

ISO7310FCDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply for side 1, specified from 3 V to 5.5 V in the recommended operating conditions.
2 IN input Logic input with TTL thresholds, specified with VIH from 2 V to 5.5 V and VIL up to 0.8 V.
3 VCC1 power_in Power supply for side 1, specified from 3 V to 5.5 V in the recommended operating conditions.
4 GND1 power_in Ground connection for VCC1 (side 1 ground reference).
5 GND2 power_in Ground connection for VCC2 (side 2 ground reference).
6 OUT output Logic output, limited to IOH of -4 mA maximum and IOL of 4 mA maximum in the recommended operating conditions.
7 GND2 power_in Ground connection for VCC2 (side 2 ground reference).
8 VCC2 power_in Power supply for side 2, specified from 3 V to 5.5 V in the recommended operating conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Communication Interface Chip/UART/485/232
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 -0.5 6 V 5
Voltage IN, OUT -0.5 V max VCC+0.5; must not exceed 6 V 5
Output current IO -15 15 mA 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VCC1, VCC2 3 5.5 V 5
High-level output current IOH -4 mA 5
Low-level output current IOL 4 mA 5
High-level input voltage VIH 2 5.5 V 5
Low-level input voltage VIL 0 0.8 V 5
Input pulse duration tui 40 ns 5
Signaling rate 1 / tui 0 25 Mbps 5
Junction temperature TJ 136 °C see Thermal Information table 5
Ambient temperature TA -40 25 125 °C 5
Junction-to-ambient thermal resistance RθJA 119.9 °C/W 5
Junction-to-case (top) thermal resistance RθJCtop 65.2 °C/W 5
Junction-to-board thermal resistance RθJB 61.3 °C/W 5
Junction-to-top characterization parameter ψJT 19.3 °C/W 5
Junction-to-board characterization parameter ψJB 60.7 °C/W 5
Power dissipation by Side-1 PD1 7.9 mW VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, 12.5 MHz 50% duty-cycle square wave 5
Power dissipation by Side-2 PD2 26.1 mW VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, 12.5 MHz 50% duty-cycle square wave 5
Low-level output voltage VOL 0.2 0.4 V IOL = 4 mA; see Figure 9 6
Low-level output voltage VOL 0 0.1 V IOL = 20 μA; see Figure 9 6
Input threshold voltage hysteresis VI(HYS) 480 mV 6
High-level input current IIH 10 μA IN = VCC 6
Low-level input current IIL -10 μA IN = 0 V 6
Common-mode transient immunity CMTI 25 65 kV/μs VI = VCC or 0 V; see Figure 11 6
Supply current for VCC1 ICC1 0.3 0.6 mA Input VI = VCC or 0 V, DC to 1 Mbps 6
Supply current for VCC2 ICC2 1.6 2.4 mA AC input CL = 15pF 6
Supply current for VCC1 at 10 Mbps ICC1 0.5 1 mA 10 Mbps CL = 15pF 6
Supply current for VCC2 at 10 Mbps ICC2 2.2 3.2 mA 10 Mbps CL = 15pF 6
Supply current for VCC1 at 25 Mbps ICC1 0.8 1.3 mA 25 Mbps CL = 15pF 6
Supply current for VCC2 at 25 Mbps ICC2 3 4.2 mA 25 Mbps CL = 15pF 6
Propagation delay time tPLH, tPHL 20 32 58 ns See Figure 9 6
Pulse width distortion PWD 4 ns /tPHL, tPLH/ 6
Part-to-part skew time tsk(pp) 24 ns 6
Output signal rise time tr 2.5 ns See Figure 9 6
Output signal fall time tf 2 ns See Figure 9 6
Fail-safe output delay time from input power loss tfs 7.5 μs See Figure 10 6
Low-level output voltage VOL 0.2 0.4 V IOL = 4 mA; see Figure 9 7
Low-level output voltage VOL 0 0.1 V IOL = 20 μA; see Figure 9 7
Input threshold voltage hysteresis VI(HYS) 450 mV 7
High-level input current IIH 10 μA IN = VCC 7
Low-level input current IIL -10 μA IN = 0 V 7
Common-mode transient immunity CMTI 25 50 kV/μs VI = VCC or 0 V; see Figure 11 7
Supply current for VCC1 ICC1 0.2 0.4 mA Input VI = VCC or 0 V, DC to 1 Mbps 7
Supply current for VCC2 ICC2 1.2 1.8 mA AC input CL = 15pF 7
Supply current for VCC1 at 10 Mbps ICC1 0.3 0.5 mA 10 Mbps CL = 15pF 7
Supply current for VCC2 at 10 Mbps ICC2 1.6 2.2 mA 10 Mbps CL = 15pF 7
Supply current for VCC1 at 25 Mbps ICC1 0.5 0.8 mA 25 Mbps CL = 15pF 7
Supply current for VCC2 at 25 Mbps ICC2 2.1 3 mA 25 Mbps CL = 15pF 7
Propagation delay time tPLH, tPHL 22 36 67 ns See Figure 9 7
Pulse width distortion PWD 3.5 ns /tPHL, tPLH/ 7
Part-to-part skew time tsk(pp) 28 ns 7
Output signal rise time tr 3.2 ns See Figure 9 7
Output signal fall time tf 2.7 ns See Figure 9 7
Fail-safe output delay time from input power loss tfs 7.4 μs See Figure 10 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pet Voltage, 6000 V 300 VRMS Basic Insulation PK; maximum working voltage Maximum Repetitive Peak working voltage per CSA 13

CAD (KiCad official)

  • Symbol: ISO7310FCDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: iso7310fcdr-etched.step / iso7310fcdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7310fcdr.step / iso7310fcdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 ddb60a76d329ef32, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF