Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7310FCDR
Texas Instruments · Digital Isolators · SOIC-8
ISO7310FCDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1, specified from 3 V to 5.5 V in the recommended operating conditions. |
| 2 | IN | input | Logic input with TTL thresholds, specified with VIH from 2 V to 5.5 V and VIL up to 0.8 V. |
| 3 | VCC1 | power_in | Power supply for side 1, specified from 3 V to 5.5 V in the recommended operating conditions. |
| 4 | GND1 | power_in | Ground connection for VCC1 (side 1 ground reference). |
| 5 | GND2 | power_in | Ground connection for VCC2 (side 2 ground reference). |
| 6 | OUT | output | Logic output, limited to IOH of -4 mA maximum and IOL of 4 mA maximum in the recommended operating conditions. |
| 7 | GND2 | power_in | Ground connection for VCC2 (side 2 ground reference). |
| 8 | VCC2 | power_in | Power supply for side 2, specified from 3 V to 5.5 V in the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 5 | ||
| Voltage IN, OUT | -0.5 | V | max VCC+0.5; must not exceed 6 V | 5 | |||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VCC1, VCC2 | 3 | 5.5 | V | 5 | ||
| High-level output current | IOH | -4 | mA | 5 | |||
| Low-level output current | IOL | 4 | mA | 5 | |||
| High-level input voltage | VIH | 2 | 5.5 | V | 5 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 5 | ||
| Input pulse duration | tui | 40 | ns | 5 | |||
| Signaling rate | 1 / tui | 0 | 25 | Mbps | 5 | ||
| Junction temperature | TJ | 136 | °C | see Thermal Information table | 5 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 119.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJCtop | 65.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 61.3 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 19.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 60.7 | °C/W | 5 | |||
| Power dissipation by Side-1 | PD1 | 7.9 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, 12.5 MHz 50% duty-cycle square wave | 5 | ||
| Power dissipation by Side-2 | PD2 | 26.1 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, 12.5 MHz 50% duty-cycle square wave | 5 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA; see Figure 9 | 6 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | IOL = 20 μA; see Figure 9 | 6 | |
| Input threshold voltage hysteresis | VI(HYS) | 480 | mV | 6 | |||
| High-level input current | IIH | 10 | μA | IN = VCC | 6 | ||
| Low-level input current | IIL | -10 | μA | IN = 0 V | 6 | ||
| Common-mode transient immunity | CMTI | 25 | 65 | kV/μs | VI = VCC or 0 V; see Figure 11 | 6 | |
| Supply current for VCC1 | ICC1 | 0.3 | 0.6 | mA | Input VI = VCC or 0 V, DC to 1 Mbps | 6 | |
| Supply current for VCC2 | ICC2 | 1.6 | 2.4 | mA | AC input CL = 15pF | 6 | |
| Supply current for VCC1 at 10 Mbps | ICC1 | 0.5 | 1 | mA | 10 Mbps CL = 15pF | 6 | |
| Supply current for VCC2 at 10 Mbps | ICC2 | 2.2 | 3.2 | mA | 10 Mbps CL = 15pF | 6 | |
| Supply current for VCC1 at 25 Mbps | ICC1 | 0.8 | 1.3 | mA | 25 Mbps CL = 15pF | 6 | |
| Supply current for VCC2 at 25 Mbps | ICC2 | 3 | 4.2 | mA | 25 Mbps CL = 15pF | 6 | |
| Propagation delay time | tPLH, tPHL | 20 | 32 | 58 | ns | See Figure 9 | 6 |
| Pulse width distortion | PWD | 4 | ns | /tPHL, tPLH/ | 6 | ||
| Part-to-part skew time | tsk(pp) | 24 | ns | 6 | |||
| Output signal rise time | tr | 2.5 | ns | See Figure 9 | 6 | ||
| Output signal fall time | tf | 2 | ns | See Figure 9 | 6 | ||
| Fail-safe output delay time from input power loss | tfs | 7.5 | μs | See Figure 10 | 6 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA; see Figure 9 | 7 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | IOL = 20 μA; see Figure 9 | 7 | |
| Input threshold voltage hysteresis | VI(HYS) | 450 | mV | 7 | |||
| High-level input current | IIH | 10 | μA | IN = VCC | 7 | ||
| Low-level input current | IIL | -10 | μA | IN = 0 V | 7 | ||
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | VI = VCC or 0 V; see Figure 11 | 7 | |
| Supply current for VCC1 | ICC1 | 0.2 | 0.4 | mA | Input VI = VCC or 0 V, DC to 1 Mbps | 7 | |
| Supply current for VCC2 | ICC2 | 1.2 | 1.8 | mA | AC input CL = 15pF | 7 | |
| Supply current for VCC1 at 10 Mbps | ICC1 | 0.3 | 0.5 | mA | 10 Mbps CL = 15pF | 7 | |
| Supply current for VCC2 at 10 Mbps | ICC2 | 1.6 | 2.2 | mA | 10 Mbps CL = 15pF | 7 | |
| Supply current for VCC1 at 25 Mbps | ICC1 | 0.5 | 0.8 | mA | 25 Mbps CL = 15pF | 7 | |
| Supply current for VCC2 at 25 Mbps | ICC2 | 2.1 | 3 | mA | 25 Mbps CL = 15pF | 7 | |
| Propagation delay time | tPLH, tPHL | 22 | 36 | 67 | ns | See Figure 9 | 7 |
| Pulse width distortion | PWD | 3.5 | ns | /tPHL, tPLH/ | 7 | ||
| Part-to-part skew time | tsk(pp) | 28 | ns | 7 | |||
| Output signal rise time | tr | 3.2 | ns | See Figure 9 | 7 | ||
| Output signal fall time | tf | 2.7 | ns | See Figure 9 | 7 | ||
| Fail-safe output delay time from input power loss | tfs | 7.4 | μs | See Figure 10 | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pet | Voltage, 6000 V 300 VRMS Basic Insulation PK; maximum working voltage Maximum Repetitive Peak working voltage per CSA | 13 |
CAD (KiCad official)
- Symbol:
ISO7310FCDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
iso7310fcdr-etched.step/iso7310fcdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7310fcdr.step/iso7310fcdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
ddb60a76d329ef32, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).