main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso7231cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso7231cdwr: viewers · Ray
iso7231cdwr-etched.fit.json iso7231cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7231cdwr-etched.glb iso7231cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7231cdwr-etched.step iso7231cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7231cdwr.glb Publish 0.1.0 · Ray
iso7231cdwr.kicad_mod Publish 0.1.0 · Ray
iso7231cdwr.kicad_sym Publish 0.1.0 · Ray
iso7231cdwr.lbr Publish 0.1.0 · Ray
iso7231cdwr.step Publish 0.1.0 · Ray
package.json iso7231cdwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json iso7231cdwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/iso7231cdwr · Ray

ISO7231CDWR

Texas Instruments · Digital Isolators · SOIC-16

ISO7231CDWR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Supply voltage for input-side circuits; operate at 3.15 V to 5.5 V with 0.1 µF bypass capacitor to GND1
2 GND1 power_in Ground reference for VCC1 input-side supply
3 INA input TTL/CMOS digital input channel A with VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, 150 mV hysteresis, isolated via capacitive barrier
4 INB input TTL/CMOS digital input channel B with VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, 150 mV hysteresis, isolated via capacitive barrier
5 OUTC tri_state Digital output channel C tri-state controlled by EN1; VOH ≥ VCCO - 0.8 V at -4 mA, VOL ≤ 0.4 V at 4 mA, isolated via capacitive barrier
6 NC unconnected Not connected; leave open
7 EN1 input Enable control input for channel C output; high = output enabled, low = output in high-impedance state
8 GND1 power_in Ground reference for VCC1 input-side supply
9 GND2 power_in Ground reference for VCC2 output-side supply
10 EN2 input Enable control input for channels A and B outputs; high = outputs enabled, low = outputs in high-impedance state
11 NC unconnected Not connected; leave open
12 INC input TTL/CMOS digital input channel C with VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, 150 mV hysteresis, isolated via capacitive barrier
13 OUTB tri_state Digital output channel B tri-state controlled by EN2; VOH ≥ VCCO - 0.8 V at -4 mA, VOL ≤ 0.4 V at 4 mA, isolated via capacitive barrier
14 OUTA tri_state Digital output channel A tri-state controlled by EN2; VOH ≥ VCCO - 0.8 V at -4 mA, VOL ≤ 0.4 V at 4 mA, isolated via capacitive barrier
15 GND2 power_in Ground reference for VCC2 output-side supply
16 VCC2 power_in Supply voltage for output-side circuits; operate at 3.15 V to 5.5 V with 0.1 µF bypass capacitor to GND2

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Signal Isolation Devices
Pins 16

CAD (KiCad official)

  • Symbol: ISO7231CDWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: iso7231cdwr-etched.step / iso7231cdwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7231cdwr.step / iso7231cdwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 c2e95ccba476b8a9, retrieved 2026-09-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF