main
Ray iso1450dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3646b1c
{
  "slug": "iso1450dwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "signal isolation devices",
    "iso1450dwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "iso1450dwr.kicad_sym",
    "iso1450dwr.kicad_mod",
    "iso1450dwr.glb",
    "iso1450dwr.step",
    "iso1450dwr.lbr",
    "docs/hero.png",
    "docs/iso1450dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "ISO1450DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Signal Isolation Devices",
    "subcategory": "Isolated RS-485/422 Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/iso1410",
    "parts": {
      "symbol": "iso1450dwr.kicad_sym",
      "footprint": "iso1450dwr.kicad_mod",
      "model_3d": "iso1450dwr-etched.glb",
      "model_3d_plain": "iso1450dwr.glb",
      "model_3d_step": "iso1450dwr-etched.step",
      "model_3d_step_plain": "iso1450dwr.step",
      "lbr": "iso1450dwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2672358"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic-side power supply; 2.25V to 5.5V recommended operating range for 50Mbps operation."
      },
      {
        "number": "2",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic-side ground connection for VCC1; pins 2 and 8 must both be connected to GND1."
      },
      {
        "number": "3",
        "name": "R",
        "type": "tri_state",
        "description": "Receiver output; high when differential input exceeds -10mV threshold, low when below -130mV, high-impedance when RE is high."
      },
      {
        "number": "4",
        "name": "RE",
        "type": "input",
        "description": "Receiver enable input, active-low; enables receiver output at low level, disables to high-impedance when high or open."
      },
      {
        "number": "5",
        "name": "DE",
        "type": "input",
        "description": "Driver enable input, active-high; enables driver outputs at high level, disables to high-impedance when low or open."
      },
      {
        "number": "6",
        "name": "D",
        "type": "input",
        "description": "Driver input; accepts logic level to control differential outputs A and B with internal pull-up resistor."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to PCB power or ground without affecting device function."
      },
      {
        "number": "8",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic-side ground connection for VCC1; pins 2 and 8 must both be connected to GND1."
      },
      {
        "number": "9",
        "name": "GND2",
        "type": "power_in",
        "description": "Bus-side isolated ground connection for VCC2; pins 9 and 15 must both be connected to GND2."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to PCB power or ground without affecting device function."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to PCB power or ground without affecting device function."
      },
      {
        "number": "12",
        "name": "A",
        "type": "bidirectional",
        "description": "Bus non-inverting differential half-duplex transceiver I/O for RS-485 communication; rated ±18V per absolute maximum ratings."
      },
      {
        "number": "13",
        "name": "B",
        "type": "bidirectional",
        "description": "Bus inverting differential half-duplex transceiver I/O for RS-485 communication; rated ±18V per absolute maximum ratings."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to PCB power or ground without affecting device function."
      },
      {
        "number": "15",
        "name": "GND2",
        "type": "power_in",
        "description": "Bus-side isolated ground connection for VCC2; pins 9 and 15 must both be connected to GND2."
      },
      {
        "number": "16",
        "name": "VCC2",
        "type": "power_in",
        "description": "Bus-side power supply; 3V to 5.5V recommended operating range for 50Mbps half-duplex operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 48,
        "cost_usd": 0.4574,
        "at": "2026-09-21T18:11:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/iso1410",
        "pages": 48,
        "sha256": "ee0c34ba1cd8865f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "iso1450dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "iso1450dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "31ca9331c24841bd803d4ad8054f05e419340184200c780153744df42be47b29",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}