main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso1450dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso1450dwr: viewers · Ray
iso1450dwr-etched.fit.json iso1450dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1450dwr-etched.glb iso1450dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1450dwr-etched.step iso1450dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1450dwr.glb Publish 0.1.0 · Ray
iso1450dwr.kicad_mod Publish 0.1.0 · Ray
iso1450dwr.kicad_sym Publish 0.1.0 · Ray
iso1450dwr.lbr Publish 0.1.0 · Ray
iso1450dwr.step Publish 0.1.0 · Ray
package.json iso1450dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json iso1450dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/iso1450dwr · Ray

ISO1450DWR

Texas Instruments · Isolated RS-485/422 Transceivers · SOIC-16-300mil

ISO1450DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Logic-side power supply; 2.25V to 5.5V recommended operating range for 50Mbps operation.
2 GND1 power_in Logic-side ground connection for VCC1; pins 2 and 8 must both be connected to GND1.
3 R tri_state Receiver output; high when differential input exceeds -10mV threshold, low when below -130mV, high-impedance when RE is high.
4 RE input Receiver enable input, active-low; enables receiver output at low level, disables to high-impedance when high or open.
5 DE input Driver enable input, active-high; enables driver outputs at high level, disables to high-impedance when low or open.
6 D input Driver input; accepts logic level to control differential outputs A and B with internal pull-up resistor.
7 NC unconnected No internal connection; may be connected to PCB power or ground without affecting device function.
8 GND1 power_in Logic-side ground connection for VCC1; pins 2 and 8 must both be connected to GND1.
9 GND2 power_in Bus-side isolated ground connection for VCC2; pins 9 and 15 must both be connected to GND2.
10 NC unconnected No internal connection; may be connected to PCB power or ground without affecting device function.
11 NC unconnected No internal connection; may be connected to PCB power or ground without affecting device function.
12 A bidirectional Bus non-inverting differential half-duplex transceiver I/O for RS-485 communication; rated ±18V per absolute maximum ratings.
13 B bidirectional Bus inverting differential half-duplex transceiver I/O for RS-485 communication; rated ±18V per absolute maximum ratings.
14 NC unconnected No internal connection; may be connected to PCB power or ground without affecting device function.
15 GND2 power_in Bus-side isolated ground connection for VCC2; pins 9 and 15 must both be connected to GND2.
16 VCC2 power_in Bus-side power supply; 3V to 5.5V recommended operating range for 50Mbps half-duplex operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Signal Isolation Devices
Pins 16

CAD (KiCad official)

  • Symbol: ISO1450DWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso1450dwr-etched.step / iso1450dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso1450dwr.step / iso1450dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 ee0c34ba1cd8865f, retrieved 2026-09-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF