main
Ray Publish 0.1.0 98ea4c7
{
  "slug": "iso1412dwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Pre-ordered Chips, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "iso1412dwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "iso1412dwr.kicad_sym",
    "iso1412dwr.kicad_mod",
    "iso1412dwr.glb",
    "iso1412dwr.step",
    "iso1412dwr.lbr",
    "docs/hero.png",
    "docs/iso1412dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "iso1412dwr-hero.glb",
    "iso1412dwr-hero.overlay.json",
    "iso1412dwr-etched.glb"
  ],
  "component": {
    "mpn": "ISO1412DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/iso1412.pdf",
    "parts": {
      "symbol": "iso1412dwr.kicad_sym",
      "footprint": "iso1412dwr.kicad_mod",
      "model_3d": "iso1412dwr-hero.glb",
      "model_3d_plain": "iso1412dwr-etched.glb",
      "model_3d_step": "iso1412dwr-etched.step",
      "model_3d_step_plain": "iso1412dwr.step",
      "lbr": "iso1412dwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2672327",
      "digikey": "296-ISO1412DWRTR-ND",
      "mouser": "595-ISO1412DWR"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:51:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-ISO1412DWRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-ISO1412DWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic-side power supply, specified at 1.71V to 5.5V in the Features list."
      },
      {
        "number": "2",
        "name": "GND1",
        "type": "power_in",
        "description": "Ground connection for VCC1; pin 2 and pin 8 must both be connected to GND1."
      },
      {
        "number": "3",
        "name": "R",
        "type": "output",
        "description": "Receiver output."
      },
      {
        "number": "4",
        "name": "RE",
        "type": "input",
        "description": "Receiver enable: disables the receiver output when high or open and enables it when low."
      },
      {
        "number": "5",
        "name": "DE",
        "type": "input",
        "description": "Driver enable: enables the driver output when high and disables it when low or open."
      },
      {
        "number": "6",
        "name": "D",
        "type": "input",
        "description": "Driver input."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; device functionality is not affected if the pin is connected to supply or ground on the PCB."
      },
      {
        "number": "8",
        "name": "GND1",
        "type": "power_in",
        "description": "Ground connection for VCC1; pin 8 and pin 2 must both be connected to GND1."
      },
      {
        "number": "9",
        "name": "GND2",
        "type": "power_in",
        "description": "Ground connection for VCC2; pin 9 and pin 15 must both be connected to GND2."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; device functionality is not affected if the pin is connected to supply or ground on the PCB."
      },
      {
        "number": "11",
        "name": "Y",
        "type": "output",
        "description": "Driver non-inverting output on the bus side."
      },
      {
        "number": "12",
        "name": "Z",
        "type": "output",
        "description": "Driver inverting output on the bus side."
      },
      {
        "number": "13",
        "name": "B",
        "type": "input",
        "description": "Receiver inverting input on the bus side."
      },
      {
        "number": "14",
        "name": "A",
        "type": "input",
        "description": "Receiver non-inverting input on the bus side."
      },
      {
        "number": "15",
        "name": "GND2",
        "type": "power_in",
        "description": "Ground connection for VCC2; pin 15 and pin 9 must both be connected to GND2."
      },
      {
        "number": "16",
        "name": "VCC2",
        "type": "power_in",
        "description": "Transceiver-side (bus-side) power supply, specified at 3V to 5.5V in the Features list."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: ISO1412 is a full-duplex device per the Device Comparison Table, so the Full-Duplex pinout (Figure 5"
        ],
        "pages_sent": 11,
        "cost_usd": 0.004,
        "at": "2026-11-12T07:51:43"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/iso1412.pdf",
        "pages": 48,
        "sha256": "82abfbcca01cb383",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "iso1412dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "iso1412dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bd160f1fcbef005a7a3374e7d9c5168651930a55f894ff2ebb9381c200c2b2fb",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0016B",
      "source_page": 45,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "iso1412dwr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}