Generated by kicad-footprint-generator · KiCad file format 20260206
ISO1412DWR
Texas Instruments · Pre-ordered Chips · SOIC-16-300mil
ISO1412DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Logic-side power supply, specified at 1.71V to 5.5V in the Features list. |
| 2 | GND1 | power_in | Ground connection for VCC1; pin 2 and pin 8 must both be connected to GND1. |
| 3 | R | output | Receiver output. |
| 4 | RE | input | Receiver enable: disables the receiver output when high or open and enables it when low. |
| 5 | DE | input | Driver enable: enables the driver output when high and disables it when low or open. |
| 6 | D | input | Driver input. |
| 7 | NC | unconnected | No internal connection; device functionality is not affected if the pin is connected to supply or ground on the PCB. |
| 8 | GND1 | power_in | Ground connection for VCC1; pin 8 and pin 2 must both be connected to GND1. |
| 9 | GND2 | power_in | Ground connection for VCC2; pin 9 and pin 15 must both be connected to GND2. |
| 10 | NC | unconnected | No internal connection; device functionality is not affected if the pin is connected to supply or ground on the PCB. |
| 11 | Y | output | Driver non-inverting output on the bus side. |
| 12 | Z | output | Driver inverting output on the bus side. |
| 13 | B | input | Receiver inverting input on the bus side. |
| 14 | A | input | Receiver non-inverting input on the bus side. |
| 15 | GND2 | power_in | Ground connection for VCC2; pin 15 and pin 9 must both be connected to GND2. |
| 16 | VCC2 | power_in | Transceiver-side (bus-side) power supply, specified at 3V to 5.5V in the Features list. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, side 1 | VCC1 | -0.5 | 6 | V | 5 | ||
| Supply voltage, side 2 | VCC2 | -0.5 | 6 | V | 5 | ||
| Output current on R pin | IO | -15 | 15 | mA | 5 | ||
| Voltage on bus pins | VBUS | -18 | 18 | V | A, B, Y, Z with respect to GND2 | 5 | |
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 5 | ||
| Supply Voltage, Side 1 | VCC1 | 1.71 | 1.89 | V | 1.8V operation | 6 | |
| Supply Voltage, Side 1 | VCC1 | 2.25 | 5.5 | V | 2.5V, 3.3V and 5.5V operation | 6 | |
| Supply Voltage, Side 2 | VCC2 | 3 | 5.5 | V | 6 | ||
| Common Mode voltage at any bus terminal | VI | -7 | 12 | V | A or B | 6 | |
| Differential input voltage, A with respect to B | VID | -15 | 15 | V | 6 | ||
| Output current, Driver | IO | -60 | 60 | mA | 6 | ||
| Output current, Receiver | IOR | -4 | 4 | mA | 6 | ||
| Operating ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Driver differential-output voltage magnitude | /VOD/ | 1.5 | 2.3 | V | RL = 60Ω, -7V ≤ VTEST ≤ 12V, 3V ≤ VCC2 ≤ 3.6V, TA<100°C | 9 | |
| Driver differential-output voltage magnitude | /VOD/ | 2.1 | 3.7 | V | RL = 60Ω, -7V ≤ VTEST ≤ 12V, 4.5V < VCC2 < 5.5V | 9 | |
| Driver differential-output voltage magnitude | /VOD/ | 2 | 4.2 | V | RL = 100Ω, RS-422 load | 9 | |
| Change in differential output voltage between two states | Δ/VOD/ | -200 | 200 | mV | RL = 54Ω or RL = 100Ω | 9 | |
| Common-mode output voltage | VOC | 1 | 3 | V | RL = 54Ω or RL = 100Ω | 9 | |
| Change in steady-state common-mode output voltage between two states | ΔVOC(SS) | -200 | 200 | mV | RL = 54Ω or RL = 100Ω | 9 | |
| Short-circuit output current | IOS | -250 | 250 | mA | VD = VCC1 or VGND1, VDE = VCC1, VCC2 = 3.3V ± 10%, -7V ≤ V ≤ 12V | 9 | |
| Common-mode transient immunity (driver) | CMTI | 85 | 100 | kV/µs | VD = VCC1 or GND1, VCC1 = 1.71V to 5.5V, VCM = 1200V, ISO141x | 9 | |
| Bus input current | Ii1 | -100 | 125 | µA | VDE = 0V, VCC2 = 0V or 5.5V, 500kbps devices, VI = -7V or 12V, other input at 0V | 10 | |
| Bus input current | Ii1 | -200 | 125 | µA | VDE = 0V, VCC2 = 0V or 5.5V, 500kbps devices, VI = -15V or 15V, other input at 0V | 10 | |
| Positive-going input threshold voltage | VTH+ | -100 | -10 | mV | -15V ≤ VCM ≤ 15V | 10 | |
| Positive-going input threshold voltage | VTH+ | -100 | -20 | mV | -7V ≤ VCM ≤ 12V | 10 | |
| Negative-going input threshold voltage | VTH- | -200 | -130 | mV | -15V ≤ VCM ≤ 15V | 10 | |
| Common-mode transient immunity (receiver) | CMTI | 85 | 100 | kV/µs | VCC1 = 1.71V to 5.5V, VID = 1.5V or -1.5V, VCM = 1200V, ISO141x | 10 | |
| Logic-side supply current, driver enabled | ICC1 | 2.6 | 4.4 | mA | Driver enabled, receiver disabled, VD = VCC1, VCC1 = 5V ± 10% | 11 | |
| Logic-side supply current, ISO141x | ICC1 | 3.2 | 5.1 | mA | Driver enabled, receiver disabled, D = 500kbps 50% duty, VCC1 = 5V ± 10% | 11 | |
| Logic-side supply current, driver and receiver enabled | ICC1 | 2.6 | 4.4 | mA | VRE = VGND1, loopback if full-duplex, VD = VCC1, VCC1 = 5V ± 10% | 11 | |
| Logic-side supply current, ISO141x driver and receiver enabled | ICC1 | 3.3 | 5.1 | mA | ISO141x, VRE = VGND1, D = 500kbps 50% duty, VCC1 = 5V ± 10%, CL(R) = 15pF | 11 | |
| Logic-side supply current, ISO141x driver and receiver enabled | ICC1 | 3.2 | 5.1 | mA | ISO141x, VRE = VGND1, D = 500kbps 50% duty, VCC1 = 3.3V ± 10%, CL(R) = 15pF | 11 | |
| Logic-side supply current, ISO141x driver disabled, receiver enabled | ICC1 | 1.7 | 3.1 | mA | ISO141x, (A-B) 500kbps 50% duty, VD = VCC1, VCC1 = 5V ± 10%, CL(R) = 15pF | 11 | |
| Logic-side supply current, ISO141x driver disabled, receiver enabled | ICC1 | 1.6 | 3.1 | mA | ISO141x, (A-B) 500kbps 50% duty, VD = VCC1, VCC1 = 3.3V ± 10%, CL(R) = 15pF | 11 | |
| Logic-side supply current, driver and receiver disabled | ICC1 | 1.6 | 3.1 | mA | VDE = VGND1, VD = VCC1, VCC1 = 5V ± 10% | 11 | |
| Logic-side supply current, driver and receiver disabled | ICC1 | 1.6 | 3.1 | mA | VDE = VGND1, VD = VCC1, VCC1 = 3.3V ± 10% | 12 | |
| Bus-side supply current, driver enabled, bus unloaded | ICC2 | 4 | 6.1 | mA | VD = VCC1, VCC2 = 3.3V ± 10% | 12 | |
| Bus-side supply current, driver enabled, bus unloaded | ICC2 | 4.5 | 6.6 | mA | VD = VCC1, VCC2 = 5V ± 10% | 12 | |
| Bus-side supply current, driver enabled, bus loaded | ICC2 | 48 | 58 | mA | VD = VCC1, RL = 54Ω, VCC2 = 3.3V ± 10% | 12 | |
| Bus-side supply current, driver enabled, bus loaded | ICC2 | 74 | 88 | mA | VD = VCC1, RL = 54Ω, VCC2 = 5V ± 10% | 12 | |
| Bus-side supply current, ISO141x | ICC2 | 63 | 95 | mA | ISO141x, D = 500kbps 50% duty, RL = 54Ω, CL = 50pF, VCC2 = 3.3V ± 10% | 12 | |
| Bus-side supply current, ISO141x | ICC2 | 113 | 160 | mA | ISO141x, D = 500kbps 50% duty, RL = 54Ω, CL = 50pF, VCC2 = 5V ± 10% | 12 | |
| Bus-side supply current, driver disabled | ICC2 | 2.6 | 4.3 | mA | VD = VCC1, VCC2 = 3.3V ± 10%, bus loaded or unloaded | 12 | |
| Bus-side supply current, driver disabled | ICC2 | 2.8 | 4.5 | mA | VD = VCC1, VCC2 = 5V ± 10%, bus loaded or unloaded | 12 | |
| Differential output rise time and fall time | tr, tf | 240 | 460 | 680 | ns | 500kbps devices, RL = 54Ω, CL = 50pF | 13 |
| Propagation delay | tPHL, tPLH | 310 | 570 | ns | 500kbps devices, RL = 54Ω, CL = 50pF | 13 | |
| Disable time | tPHZ, tPLZ | 125 | 200 | ns | 500kbps devices, see Figure 7-6 and Figure 7-7 | 13 | |
| Enable time | tPZH, tPZL | 160 | 600 | ns | 500kbps devices, see Figure 7-6 and Figure 7-7 | 13 | |
| Propagation delay | tPHL, tPLH | 92 | 135 | ns | 500kbps devices, CL = 15pF, see Figure 7-8 | 14 | |
| Disable time | tPHZ, tPLZ | 9 | 30 | ns | 500kbps devices, see Figure 7-9 and Figure 7-10 | 14 | |
| Thermal resistance, junction-to-ambient | RθJA | 67.9 | °C/W | DW (SOIC) 16 pins | 6 |
CAD (KiCad official)
- Symbol:
ISO1412DWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso1412dwr-etched.step/iso1412dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso1412dwr.step/iso1412dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
82abfbcca01cb383, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).