main
Ray iso1410dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dd44759
{
  "schema_version": 1,
  "type": "component",
  "slug": "iso1410dwr",
  "title": "ISO1410DWR",
  "brief": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "signal isolation devices",
    "iso1410dwr"
  ],
  "component": {
    "mpn": "ISO1410DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Signal Isolation Devices",
    "subcategory": "Isolated RS-485/422 Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/iso1410",
    "parts": {
      "symbol": "iso1410dwr.kicad_sym",
      "footprint": "iso1410dwr.kicad_mod",
      "model_3d": "iso1410dwr-etched.glb",
      "model_3d_plain": "iso1410dwr.glb",
      "model_3d_step": "iso1410dwr-etched.step",
      "model_3d_step_plain": "iso1410dwr.step",
      "lbr": "iso1410dwr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic-side supply. Operating range 1.71 V to 5.5 V. Local bypass capacitor to GND1 required."
      },
      {
        "number": "2",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic-side ground reference for VCC1. Pins 2 and 8 must both be tied to GND1."
      },
      {
        "number": "3",
        "name": "R",
        "type": "output",
        "description": "Receiver output. Drives logic-level data recovered from the isolated RS-485 bus (A/B) to the MCU."
      },
      {
        "number": "4",
        "name": "RE",
        "type": "input",
        "description": "Receiver enable, active-low. Receiver output is enabled when RE is low; disabled (high-Z on R) when RE is high or left open."
      },
      {
        "number": "5",
        "name": "DE",
        "type": "input",
        "description": "Driver enable, active-high. Driver outputs on the bus (A/B) are enabled when DE is high; disabled when DE is low or open."
      },
      {
        "number": "6",
        "name": "D",
        "type": "input",
        "description": "Driver input. Logic-side data to be transmitted onto the isolated RS-485 bus when DE is asserted."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. May be tied to any supply or ground on the PCB without affecting device operation."
      },
      {
        "number": "8",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic-side ground reference for VCC1. Both pin 2 and pin 8 must be connected to GND1."
      },
      {
        "number": "9",
        "name": "GND2",
        "type": "power_in",
        "description": "Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. May be left floating or tied to PCB supply/ground without affecting operation."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on the half-duplex ISO1410 variant. (This position is used for the Y driver output on the full-duplex ISO1412.)"
      },
      {
        "number": "12",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting RS-485 bus I/O. Acts as driver output when DE=1 and as receiver non-inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated."
      },
      {
        "number": "13",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting RS-485 bus I/O. Acts as driver complementary output when DE=1 and as receiver inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on the half-duplex ISO1410 variant. (This position is used for the A input on the full-duplex ISO1412.)"
      },
      {
        "number": "15",
        "name": "GND2",
        "type": "power_in",
        "description": "Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2."
      },
      {
        "number": "16",
        "name": "VCC2",
        "type": "power_in",
        "description": "Bus-side (isolated) supply for the RS-485 transceiver. Operating range 3 V to 5.5 V. Local bypass capacitor to GND2 required."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/iso1410",
        "pages": 48,
        "sha256": "ee0c34ba1cd8865f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "iso1410dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "iso1410dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "053f25241f5cfd00fdacad33a526b6b2972805f9ff91e53aab39dc150c9a0853",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16-300mil",
      "Category": "Signal Isolation Devices",
      "Pins": "16"
    }
  },
  "variants": [
    {
      "mpn": "ISO1410DWR",
      "kind": "packaging"
    },
    {
      "mpn": "ISO1412DW",
      "kind": "unknown"
    },
    {
      "mpn": "ISO1412DWR",
      "kind": "unknown"
    },
    {
      "mpn": "ISO1430DW",
      "kind": "unknown"
    },
    {
      "mpn": "ISO1430DWR",
      "kind": "unknown"
    },
    {
      "mpn": "ISO1450DW",
      "kind": "unknown"
    },
    {
      "mpn": "ISO1450DWR",
      "kind": "unknown"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "iso1410dwr"
  ],
  "discovery_pitch": "ISO1410DWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "iso1410dwr.kicad_sym",
    "iso1410dwr.kicad_mod",
    "iso1410dwr.glb",
    "iso1410dwr.step",
    "iso1410dwr.lbr",
    "docs/hero.png",
    "docs/iso1410dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T23:01:25.759Z"
}