main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso1410dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso1410dwr: viewers · Ray
iso1410dwr-etched.fit.json iso1410dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1410dwr-etched.glb iso1410dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1410dwr-etched.step iso1410dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1410dwr.glb Publish 0.1.0 · Ray
iso1410dwr.kicad_mod Publish 0.1.0 · Ray
iso1410dwr.kicad_sym Publish 0.1.0 · Ray
iso1410dwr.lbr Publish 0.1.0 · Ray
iso1410dwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json iso1410dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md iso1410dwr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ISO1410DWR

Texas Instruments · Isolated RS-485/422 Transceivers · SOIC-16-300mil

ISO1410DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Logic-side supply. Operating range 1.71 V to 5.5 V. Local bypass capacitor to GND1 required.
2 GND1 power_in Logic-side ground reference for VCC1. Pins 2 and 8 must both be tied to GND1.
3 R output Receiver output. Drives logic-level data recovered from the isolated RS-485 bus (A/B) to the MCU.
4 RE input Receiver enable, active-low. Receiver output is enabled when RE is low; disabled (high-Z on R) when RE is high or left open.
5 DE input Driver enable, active-high. Driver outputs on the bus (A/B) are enabled when DE is high; disabled when DE is low or open.
6 D input Driver input. Logic-side data to be transmitted onto the isolated RS-485 bus when DE is asserted.
7 NC unconnected No internal connection. May be tied to any supply or ground on the PCB without affecting device operation.
8 GND1 power_in Logic-side ground reference for VCC1. Both pin 2 and pin 8 must be connected to GND1.
9 GND2 power_in Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2.
10 NC unconnected No internal connection. May be left floating or tied to PCB supply/ground without affecting operation.
11 NC unconnected No internal connection on the half-duplex ISO1410 variant. (This position is used for the Y driver output on the full-duplex ISO1412.)
12 A bidirectional Non-inverting RS-485 bus I/O. Acts as driver output when DE=1 and as receiver non-inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated.
13 B bidirectional Inverting RS-485 bus I/O. Acts as driver complementary output when DE=1 and as receiver inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated.
14 NC unconnected No internal connection on the half-duplex ISO1410 variant. (This position is used for the A input on the full-duplex ISO1412.)
15 GND2 power_in Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2.
16 VCC2 power_in Bus-side (isolated) supply for the RS-485 transceiver. Operating range 3 V to 5.5 V. Local bypass capacitor to GND2 required.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Signal Isolation Devices
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • ISO1410DWR
  • ISO1412DW
  • ISO1412DWR
  • ISO1430DW
  • ISO1430DWR
  • ISO1450DW
  • ISO1450DWR

CAD (KiCad official)

  • Symbol: ISO1410DWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso1410dwr-etched.step / iso1410dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso1410dwr.step / iso1410dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 ee0c34ba1cd8865f, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF