main
Ray
Publish 0.1.0
ac15403
ISO1212DBQ
Texas Instruments · DI/DO Isolators · SSOP-16-150mil
ISO1212DBQ from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1. |
| 2 | VCC1 | power_in | Power supply, side 1. |
| 3 | EN | input | Output enable: the output pins on side 1 are enabled when EN is high or open and are high-impedance when EN is low; in noisy applications tie EN to VCC1. |
| 4 | OUT1 | output | Channel 1 output. |
| 5 | OUT2 | output | Channel 2 output. |
| 6 | NC | unconnected | Not connected. |
| 7 | NC | unconnected | Not connected. |
| 8 | GND1 | power_in | Ground connection for VCC1. |
| 9 | FGND2 | power_in | Field-side ground, channel 2. |
| 10 | IN2 | input | Field-side current input, channel 2. |
| 11 | SENSE2 | input | Field-side voltage sense, channel 2. |
| 12 | SUB2 | passive | Internal connection to input chip 2 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB1 or any other signal or plane. |
| 13 | SUB1 | passive | Internal connection to input chip 1 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB2 or any other signal or plane. |
| 14 | FGND1 | power_in | Field-side ground, channel 1. |
| 15 | IN1 | input | Field-side current input, channel 1. |
| 16 | SENSE1 | input | Field-side voltage sense, channel 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage input side | VCC1 | 2.25 | 5.5 | V | 5 | ||
| Voltage on INx and SENSEx pins | VINx, VSENSEx | -60 | 60 | V | 5 | ||
| High-level output current from OUTx pin | IOH | -4 | mA | VCC1 = 5V | 5 | ||
| High-level output current from OUTx pin | IOH | -3 | mA | VCC1 = 3.3V | 5 | ||
| High-level output current from OUTx pin | IOH | -2 | mA | VCC1 = 2.5V | 5 | ||
| Low-level output current into OUTx pin | IOL | 4 | mA | VCC1 = 5V | 5 | ||
| Low-level output current into OUTx pin | IOL | 3 | mA | VCC1 = 3.3V | 5 | ||
| Low-level output current into OUTx pin | IOL | 2 | mA | VCC1 = 2.5V | 5 | ||
| Minimum pulse width at SENSEx pins | tUI | 150 | ns | 5 | |||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Supply voltage, control side | VCC1 | -0.5 | 6 | V | 5 | ||
| Voltage on OUTx pins and EN pin | VOUTx, VEN | -0.5 | V | upper limit VCC1 + 0.5; maximum voltage must not exceed 6V | 5 | ||
| Output current on OUTx pins | IO | -15 | 15 | mA | 5 | ||
| Voltage on IN and SENSE pins | VINx, VSENSEx | -60 | 60 | V | 5 | ||
| Functional isolation between channels in ISO1212 on the field side | V(ISO,FUNC) | -60 | 60 | V | 5 | ||
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| VCC1 supply voltage UVLO positive-going threshold | VIT+ (UVLO1) | 2.25 | V | 10 | |||
| VCC1 supply voltage UVLO negative-going threshold | VIT- (UVLO1) | 1.7 | V | 10 | |||
| VCC1 supply quiescent current, ISO1212 | ICC1 | 1.2 | 1.9 | mA | EN = VCC1 | 10 | |
| Low-level input leakage at EN pin | IIH | -10 | μA | EN = GND1 | 10 | ||
| Low-level output voltage on OUTx | VOL | 0.4 | V | VCC1 = 4.5V; IOH = 4mA | 10 | ||
| Typical sum of current drawn from IN and SENSE pins across temperature | I(INx+SENSEx) TYP | 2.2 | 2.47 | mA | RTHR = 0Ω, RSENSE = 562Ω, VSENSE = 24V, -40°C < TA < 125°C, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | -0.1 | µA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; -60V < VSENSE < 0V, see Figure 6-2 | 10 | ||
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 1.9 | 2.5 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.05 | 2.75 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; VIL < VSENSE < 30V, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.1 | 2.83 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 30V < VSENSE < 36V, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.1 | 3.1 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.3 | 6.8 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.5 | 7 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; VIL < VSENSE < 36V, see Figure 6-2 | 10 | |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.5 | 7.3 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 | 10 | |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 6.5 | 7 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 | |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 8.7 | 9.2 | V | RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 | 11 | |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 15.2 | 15.8 | V | RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 | 11 | |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 8.2 | 8.55 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 | |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 10.4 | 10.95 | V | RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 | 11 | |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 17 | 18.25 | V | RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 | 11 | |
| Threshold voltage hysteresis at module input | VHYS | 1 | 1.2 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 | |
| Output signal rise and fall time, OUTx pins | tr, tf | 3 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 | ||
| Propagation delay time for low to high transition | tPLH | 110 | 140 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 | |
| Propagation delay time for high to low transition | tPHL | 10 | 15 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 | |
| Pulse skew /tPHL - tPLH/ | tsk(p) | 102 | 130 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 | |
| Minimum pulse width | tUI | 150 | ns | Input rise and fall times = 125ns, see Figure 6-1 | 11 | ||
| Disable propagation delay, high-to-high impedance output | tPHZ | 17 | 40 | ns | See Figure 6-4 | 11 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 17 | 40 | ns | See Figure 6-3 | 11 | |
| Enable propagation delay, high impedance-to-high output | tPZH | 3 | 8.5 | µs | See Figure 6-4 | 11 | |
| Enable propagation delay, high impedance-to-low output | tPZL | 17 | 40 | ns | See Figure 6-3 | 11 | |
| Common mode transient immunity | CMTI | 25 | 70 | kV/µs | See Figure 6-5 | 11 | |
| Junction-to-ambient thermal resistance (DBQ 16 pins) | RθJA | 116.9 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DBQ 16 pins) | RθJC(top) | 56.5 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DBQ 16 pins) | RθJB | 64.7 | °C/W | 6 | |||
| Junction-to-top characterization parameter (DBQ 16 pins) | ΨJT | 27.9 | °C/W | 6 | |||
| Junction-to-board characterization parameter (DBQ 16 pins) | ΨJB | 64.1 | °C/W | 6 | |||
| Hysteresis voltage of VCC1 UVLO threshold | VHYS (UVLO1) | 0.2 | V | 10 |
CAD (KiCad official)
- Symbol:
ISO1212DBQ - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
iso1212dbq-etched.step/iso1212dbq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso1212dbq.step/iso1212dbq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
41e0bc7308dd4e0c, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO1212DBQ
**Texas Instruments** · DI/DO Isolators · SSOP-16-150mil
ISO1212DBQ from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1. |
| 2 | VCC1 | power_in | Power supply, side 1. |
| 3 | EN | input | Output enable: the output pins on side 1 are enabled when EN is high or open and are high-impedance when EN is low; in noisy applications tie EN to VCC1. |
| 4 | OUT1 | output | Channel 1 output. |
| 5 | OUT2 | output | Channel 2 output. |
| 6 | NC | unconnected | Not connected. |
| 7 | NC | unconnected | Not connected. |
| 8 | GND1 | power_in | Ground connection for VCC1. |
| 9 | FGND2 | power_in | Field-side ground, channel 2. |
| 10 | IN2 | input | Field-side current input, channel 2. |
| 11 | SENSE2 | input | Field-side voltage sense, channel 2. |
| 12 | SUB2 | passive | Internal connection to input chip 2 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB1 or any other signal or plane. |
| 13 | SUB1 | passive | Internal connection to input chip 1 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB2 or any other signal or plane. |
| 14 | FGND1 | power_in | Field-side ground, channel 1. |
| 15 | IN1 | input | Field-side current input, channel 1. |
| 16 | SENSE1 | input | Field-side voltage sense, channel 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage input side | VCC1 | 2.25 | | 5.5 | V | | 5 |
| Voltage on INx and SENSEx pins | VINx, VSENSEx | -60 | | 60 | V | | 5 |
| High-level output current from OUTx pin | IOH | -4 | | | mA | VCC1 = 5V | 5 |
| High-level output current from OUTx pin | IOH | -3 | | | mA | VCC1 = 3.3V | 5 |
| High-level output current from OUTx pin | IOH | -2 | | | mA | VCC1 = 2.5V | 5 |
| Low-level output current into OUTx pin | IOL | | | 4 | mA | VCC1 = 5V | 5 |
| Low-level output current into OUTx pin | IOL | | | 3 | mA | VCC1 = 3.3V | 5 |
| Low-level output current into OUTx pin | IOL | | | 2 | mA | VCC1 = 2.5V | 5 |
| Minimum pulse width at SENSEx pins | tUI | 150 | | | ns | | 5 |
| Ambient temperature | TA | -40 | | 125 | °C | | 5 |
| Supply voltage, control side | VCC1 | -0.5 | | 6 | V | | 5 |
| Voltage on OUTx pins and EN pin | VOUTx, VEN | -0.5 | | | V | upper limit VCC1 + 0.5; maximum voltage must not exceed 6V | 5 |
| Output current on OUTx pins | IO | -15 | | 15 | mA | | 5 |
| Voltage on IN and SENSE pins | VINx, VSENSEx | -60 | | 60 | V | | 5 |
| Functional isolation between channels in ISO1212 on the field side | V(ISO,FUNC) | -60 | | 60 | V | | 5 |
| Junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| VCC1 supply voltage UVLO positive-going threshold | VIT+ (UVLO1) | | | 2.25 | V | | 10 |
| VCC1 supply voltage UVLO negative-going threshold | VIT- (UVLO1) | | | 1.7 | V | | 10 |
| VCC1 supply quiescent current, ISO1212 | ICC1 | | 1.2 | 1.9 | mA | EN = VCC1 | 10 |
| Low-level input leakage at EN pin | IIH | -10 | | | μA | EN = GND1 | 10 |
| Low-level output voltage on OUTx | VOL | | | 0.4 | V | VCC1 = 4.5V; IOH = 4mA | 10 |
| Typical sum of current drawn from IN and SENSE pins across temperature | I(INx+SENSEx) TYP | 2.2 | | 2.47 | mA | RTHR = 0Ω, RSENSE = 562Ω, VSENSE = 24V, -40°C < TA < 125°C, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | -0.1 | | | µA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; -60V < VSENSE < 0V, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 1.9 | | 2.5 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.05 | | 2.75 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; VIL < VSENSE < 30V, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.1 | | 2.83 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 30V < VSENSE < 36V, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 2.1 | | 3.1 | mA | RTHR = 0Ω, RSENSE = 562Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.3 | | 6.8 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.5 | | 7 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; VIL < VSENSE < 36V, see Figure 6-2 | 10 |
| Sum of current drawn from IN and SENSE pins | I(INx+SENSEx) | 5.5 | | 7.3 | mA | RTHR = 0Ω, RSENSE = 200Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 | 10 |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 6.5 | | 7 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 8.7 | | 9.2 | V | RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 | 11 |
| Low level threshold voltage at module input (including RTHR) for output low | VIL | 15.2 | | 15.8 | V | RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 | 11 |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 8.2 | | 8.55 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 10.4 | | 10.95 | V | RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 | 11 |
| High level threshold voltage at module input (including RTHR) for output high | VIH | 17 | | 18.25 | V | RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 | 11 |
| Threshold voltage hysteresis at module input | VHYS | 1 | | 1.2 | V | RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 | 11 |
| Output signal rise and fall time, OUTx pins | tr, tf | | | 3 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 |
| Propagation delay time for low to high transition | tPLH | 110 | | 140 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 |
| Propagation delay time for high to low transition | tPHL | 10 | | 15 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 |
| Pulse skew /tPHL - tPLH/ | tsk(p) | 102 | | 130 | ns | Input rise and fall times = 10ns, see Figure 6-1 | 11 |
| Minimum pulse width | tUI | 150 | | | ns | Input rise and fall times = 125ns, see Figure 6-1 | 11 |
| Disable propagation delay, high-to-high impedance output | tPHZ | 17 | | 40 | ns | See Figure 6-4 | 11 |
| Disable propagation delay, low-to-high impedance output | tPLZ | 17 | | 40 | ns | See Figure 6-3 | 11 |
| Enable propagation delay, high impedance-to-high output | tPZH | 3 | | 8.5 | µs | See Figure 6-4 | 11 |
| Enable propagation delay, high impedance-to-low output | tPZL | 17 | | 40 | ns | See Figure 6-3 | 11 |
| Common mode transient immunity | CMTI | 25 | 70 | | kV/µs | See Figure 6-5 | 11 |
| Junction-to-ambient thermal resistance (DBQ 16 pins) | RθJA | | 116.9 | | °C/W | | 6 |
| Junction-to-case (top) thermal resistance (DBQ 16 pins) | RθJC(top) | | 56.5 | | °C/W | | 6 |
| Junction-to-board thermal resistance (DBQ 16 pins) | RθJB | | 64.7 | | °C/W | | 6 |
| Junction-to-top characterization parameter (DBQ 16 pins) | ΨJT | | 27.9 | | °C/W | | 6 |
| Junction-to-board characterization parameter (DBQ 16 pins) | ΨJB | | 64.1 | | °C/W | | 6 |
| Hysteresis voltage of VCC1 UVLO threshold | VHYS (UVLO1) | | 0.2 | | V | | 10 |
## CAD (KiCad official)
- Symbol: `ISO1212DBQ`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `iso1212dbq-etched.step` / `iso1212dbq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso1212dbq.step` / `iso1212dbq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso1212.pdf) (47 pp, sha256 `41e0bc7308dd4e0c`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso1212dbq-datasheet.pdf)