Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO1212DBQ

Texas Instruments · DI/DO Isolators · SSOP-16-150mil

ISO1212DBQ from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND1 power_in Ground connection for VCC1.
2 VCC1 power_in Power supply, side 1.
3 EN input Output enable: the output pins on side 1 are enabled when EN is high or open and are high-impedance when EN is low; in noisy applications tie EN to VCC1.
4 OUT1 output Channel 1 output.
5 OUT2 output Channel 2 output.
6 NC unconnected Not connected.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC1.
9 FGND2 power_in Field-side ground, channel 2.
10 IN2 input Field-side current input, channel 2.
11 SENSE2 input Field-side voltage sense, channel 2.
12 SUB2 passive Internal connection to input chip 2 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB1 or any other signal or plane.
13 SUB1 passive Internal connection to input chip 1 substrate; for good thermal performance connect to a small 2mm x 2mm floating plane, not to FGND1, FGND2, SUB2 or any other signal or plane.
14 FGND1 power_in Field-side ground, channel 1.
15 IN1 input Field-side current input, channel 1.
16 SENSE1 input Field-side voltage sense, channel 1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-150mil
Category Signal Isolation Devices
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage input side VCC1 2.25 5.5 V 5
Voltage on INx and SENSEx pins VINx, VSENSEx -60 60 V 5
High-level output current from OUTx pin IOH -4 mA VCC1 = 5V 5
High-level output current from OUTx pin IOH -3 mA VCC1 = 3.3V 5
High-level output current from OUTx pin IOH -2 mA VCC1 = 2.5V 5
Low-level output current into OUTx pin IOL 4 mA VCC1 = 5V 5
Low-level output current into OUTx pin IOL 3 mA VCC1 = 3.3V 5
Low-level output current into OUTx pin IOL 2 mA VCC1 = 2.5V 5
Minimum pulse width at SENSEx pins tUI 150 ns 5
Ambient temperature TA -40 125 °C 5
Supply voltage, control side VCC1 -0.5 6 V 5
Voltage on OUTx pins and EN pin VOUTx, VEN -0.5 V upper limit VCC1 + 0.5; maximum voltage must not exceed 6V 5
Output current on OUTx pins IO -15 15 mA 5
Voltage on IN and SENSE pins VINx, VSENSEx -60 60 V 5
Functional isolation between channels in ISO1212 on the field side V(ISO,FUNC) -60 60 V 5
Junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
VCC1 supply voltage UVLO positive-going threshold VIT+ (UVLO1) 2.25 V 10
VCC1 supply voltage UVLO negative-going threshold VIT- (UVLO1) 1.7 V 10
VCC1 supply quiescent current, ISO1212 ICC1 1.2 1.9 mA EN = VCC1 10
Low-level input leakage at EN pin IIH -10 μA EN = GND1 10
Low-level output voltage on OUTx VOL 0.4 V VCC1 = 4.5V; IOH = 4mA 10
Typical sum of current drawn from IN and SENSE pins across temperature I(INx+SENSEx) TYP 2.2 2.47 mA RTHR = 0Ω, RSENSE = 562Ω, VSENSE = 24V, -40°C < TA < 125°C, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) -0.1 µA RTHR = 0Ω, RSENSE = 562Ω ± 1%; -60V < VSENSE < 0V, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 1.9 2.5 mA RTHR = 0Ω, RSENSE = 562Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 2.05 2.75 mA RTHR = 0Ω, RSENSE = 562Ω ± 1%; VIL < VSENSE < 30V, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 2.1 2.83 mA RTHR = 0Ω, RSENSE = 562Ω ± 1%; 30V < VSENSE < 36V, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 2.1 3.1 mA RTHR = 0Ω, RSENSE = 562Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 5.3 6.8 mA RTHR = 0Ω, RSENSE = 200Ω ± 1%; 5V < VSENSE < VIL, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 5.5 7 mA RTHR = 0Ω, RSENSE = 200Ω ± 1%; VIL < VSENSE < 36V, see Figure 6-2 10
Sum of current drawn from IN and SENSE pins I(INx+SENSEx) 5.5 7.3 mA RTHR = 0Ω, RSENSE = 200Ω ± 1%; 36V < VSENSE < 60V, see Figure 6-2 10
Low level threshold voltage at module input (including RTHR) for output low VIL 6.5 7 V RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 11
Low level threshold voltage at module input (including RTHR) for output low VIL 8.7 9.2 V RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 11
Low level threshold voltage at module input (including RTHR) for output low VIL 15.2 15.8 V RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 11
High level threshold voltage at module input (including RTHR) for output high VIH 8.2 8.55 V RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 11
High level threshold voltage at module input (including RTHR) for output high VIH 10.4 10.95 V RSENSE = 562Ω, RTHR = 1kΩ, see Figure 6-2 11
High level threshold voltage at module input (including RTHR) for output high VIH 17 18.25 V RSENSE = 562Ω, RTHR = 4kΩ, see Figure 6-2 11
Threshold voltage hysteresis at module input VHYS 1 1.2 V RSENSE = 562Ω, RTHR = 0Ω, see Figure 6-2 11
Output signal rise and fall time, OUTx pins tr, tf 3 ns Input rise and fall times = 10ns, see Figure 6-1 11
Propagation delay time for low to high transition tPLH 110 140 ns Input rise and fall times = 10ns, see Figure 6-1 11
Propagation delay time for high to low transition tPHL 10 15 ns Input rise and fall times = 10ns, see Figure 6-1 11
Pulse skew /tPHL - tPLH/ tsk(p) 102 130 ns Input rise and fall times = 10ns, see Figure 6-1 11
Minimum pulse width tUI 150 ns Input rise and fall times = 125ns, see Figure 6-1 11
Disable propagation delay, high-to-high impedance output tPHZ 17 40 ns See Figure 6-4 11
Disable propagation delay, low-to-high impedance output tPLZ 17 40 ns See Figure 6-3 11
Enable propagation delay, high impedance-to-high output tPZH 3 8.5 µs See Figure 6-4 11
Enable propagation delay, high impedance-to-low output tPZL 17 40 ns See Figure 6-3 11
Common mode transient immunity CMTI 25 70 kV/µs See Figure 6-5 11
Junction-to-ambient thermal resistance (DBQ 16 pins) RθJA 116.9 °C/W 6
Junction-to-case (top) thermal resistance (DBQ 16 pins) RθJC(top) 56.5 °C/W 6
Junction-to-board thermal resistance (DBQ 16 pins) RθJB 64.7 °C/W 6
Junction-to-top characterization parameter (DBQ 16 pins) ΨJT 27.9 °C/W 6
Junction-to-board characterization parameter (DBQ 16 pins) ΨJB 64.1 °C/W 6
Hysteresis voltage of VCC1 UVLO threshold VHYS (UVLO1) 0.2 V 10

CAD (KiCad official)

  • Symbol: ISO1212DBQ
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: iso1212dbq-etched.step / iso1212dbq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso1212dbq.step / iso1212dbq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 41e0bc7308dd4e0c, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF