main
Ray
Publish 0.1.0
9982b8e
ISM330DLCTR
STMicroelectronics · Pre-ordered Products · LGA-14(2.5x3)
ISM330DLCTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/SA0 | bidirectional | SPI 4-wire serial data output (SDO) in SPI mode, and the least significant bit of the I²C device address (SA0) when connected to VDD or GND. |
| 2 | SDx | bidirectional | Connect to VDDIO or GND in Mode 1; I²C serial data master (MSDA) in Mode 2; auxiliary SPI serial data input (SDI) and 3-wire serial data output (SDO) in Mode 3/4. |
| 3 | SCx | bidirectional | Connect to VDDIO or GND in Mode 1; I²C serial clock master (MSCL) in Mode 2; auxiliary SPI serial port clock (SPC_Aux) in Mode 3/4. |
| 4 | INT1 | output | Programmable interrupt 1 output. |
| 5 | VDDIO | power_in | Power supply for I/O pins; a 100 nF filter capacitor is recommended. |
| 6 | GND | power_in | 0 V supply. |
| 7 | GND | power_in | 0 V supply. |
| 8 | VDD | power_in | Power supply for the device core; the analog supply voltage range is 1.71 V to 3.6 V. |
| 9 | INT2 | output | Programmable interrupt 2 (INT2) output, which also serves as Data enable (DEN) and, in Mode 2, I²C master external synchronization (MDRDY). |
| 10 | OCS_Aux | input | Leave unconnected in Modes 1 and 2; auxiliary SPI 3/4-wire interface enable in Modes 3/4. |
| 11 | SDO_Aux | output | Connect to VDDIO or leave unconnected in Modes 1 and 2; auxiliary SPI 4-wire serial data output in Modes 3/4. |
| 12 | CS | input | I²C/SPI mode selection: 1 selects SPI idle mode with I²C enabled, 0 selects SPI communication mode with I²C disabled. |
| 13 | SCL | bidirectional | I²C serial clock (SCL) or SPI serial port clock (SPC). |
| 14 | SDA | bidirectional | I²C serial data (SDA), or SPI serial data input (SDI) with 3-wire serial data output (SDO). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-14(2.5x3) |
| Category | Solders / Accessories / Batteries |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
ISM330DLCTR - Footprint:
Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm - 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files:
ism330dlctr-etched.step/ism330dlctr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ism330dlctr.step/ism330dlctr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (116 pp, sha256
d1ea4d0108fe5497, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISM330DLCTR
**STMicroelectronics** · Pre-ordered Products · LGA-14(2.5x3)
ISM330DLCTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/SA0 | bidirectional | SPI 4-wire serial data output (SDO) in SPI mode, and the least significant bit of the I²C device address (SA0) when connected to VDD or GND. |
| 2 | SDx | bidirectional | Connect to VDDIO or GND in Mode 1; I²C serial data master (MSDA) in Mode 2; auxiliary SPI serial data input (SDI) and 3-wire serial data output (SDO) in Mode 3/4. |
| 3 | SCx | bidirectional | Connect to VDDIO or GND in Mode 1; I²C serial clock master (MSCL) in Mode 2; auxiliary SPI serial port clock (SPC_Aux) in Mode 3/4. |
| 4 | INT1 | output | Programmable interrupt 1 output. |
| 5 | VDDIO | power_in | Power supply for I/O pins; a 100 nF filter capacitor is recommended. |
| 6 | GND | power_in | 0 V supply. |
| 7 | GND | power_in | 0 V supply. |
| 8 | VDD | power_in | Power supply for the device core; the analog supply voltage range is 1.71 V to 3.6 V. |
| 9 | INT2 | output | Programmable interrupt 2 (INT2) output, which also serves as Data enable (DEN) and, in Mode 2, I²C master external synchronization (MDRDY). |
| 10 | OCS_Aux | input | Leave unconnected in Modes 1 and 2; auxiliary SPI 3/4-wire interface enable in Modes 3/4. |
| 11 | SDO_Aux | output | Connect to VDDIO or leave unconnected in Modes 1 and 2; auxiliary SPI 4-wire serial data output in Modes 3/4. |
| 12 | CS | input | I²C/SPI mode selection: 1 selects SPI idle mode with I²C enabled, 0 selects SPI communication mode with I²C disabled. |
| 13 | SCL | bidirectional | I²C serial clock (SCL) or SPI serial port clock (SPC). |
| 14 | SDA | bidirectional | I²C serial data (SDA), or SPI serial data input (SDI) with 3-wire serial data output (SDO). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-14(2.5x3) |
| Category | Solders / Accessories / Batteries |
| Pins | 14 |
## CAD (KiCad official)
- Symbol: `ISM330DLCTR`
- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`
- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files: `ism330dlctr-etched.step` / `ism330dlctr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ism330dlctr.step` / `ism330dlctr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/ism330dlctr.pdf) (116 pp, sha256 `d1ea4d0108fe5497`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ism330dlctr-datasheet.pdf)