main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ism330dlctr: viewers · Ray
ism330dlctr-etched.glb Publish 0.1.0 · Ray
ism330dlctr-etched.step ism330dlctr: factory component page (tier=mfr) · Ray
ism330dlctr-hero.glb ism330dlctr: hero GLB from the etched model (keeps the MPN mark) · Ray
ism330dlctr-hero.overlay.json Publish 0.1.0 · Ray
ism330dlctr.glb Publish 0.1.0 · Ray
ism330dlctr.kicad_mod Publish 0.1.0 · Ray
ism330dlctr.kicad_sym Publish 0.1.0 · Ray
ism330dlctr.lbr Publish 0.1.0 · Ray
ism330dlctr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

ISM330DLCTR

STMicroelectronics · Pre-ordered Products · LGA-14(2.5x3)

ISM330DLCTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDO/SA0 bidirectional SPI 4-wire serial data output (SDO) in SPI mode, and the least significant bit of the I²C device address (SA0) when connected to VDD or GND.
2 SDx bidirectional Connect to VDDIO or GND in Mode 1; I²C serial data master (MSDA) in Mode 2; auxiliary SPI serial data input (SDI) and 3-wire serial data output (SDO) in Mode 3/4.
3 SCx bidirectional Connect to VDDIO or GND in Mode 1; I²C serial clock master (MSCL) in Mode 2; auxiliary SPI serial port clock (SPC_Aux) in Mode 3/4.
4 INT1 output Programmable interrupt 1 output.
5 VDDIO power_in Power supply for I/O pins; a 100 nF filter capacitor is recommended.
6 GND power_in 0 V supply.
7 GND power_in 0 V supply.
8 VDD power_in Power supply for the device core; the analog supply voltage range is 1.71 V to 3.6 V.
9 INT2 output Programmable interrupt 2 (INT2) output, which also serves as Data enable (DEN) and, in Mode 2, I²C master external synchronization (MDRDY).
10 OCS_Aux input Leave unconnected in Modes 1 and 2; auxiliary SPI 3/4-wire interface enable in Modes 3/4.
11 SDO_Aux output Connect to VDDIO or leave unconnected in Modes 1 and 2; auxiliary SPI 4-wire serial data output in Modes 3/4.
12 CS input I²C/SPI mode selection: 1 selects SPI idle mode with I²C enabled, 0 selects SPI communication mode with I²C disabled.
13 SCL bidirectional I²C serial clock (SCL) or SPI serial port clock (SPC).
14 SDA bidirectional I²C serial data (SDA), or SPI serial data input (SDI) with 3-wire serial data output (SDO).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-14(2.5x3)
Category Solders / Accessories / Batteries
Pins 14

CAD (KiCad official)

  • Symbol: ISM330DLCTR
  • Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
  • 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
  • 3D model files: ism330dlctr-etched.step / ism330dlctr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ism330dlctr.step / ism330dlctr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (116 pp, sha256 d1ea4d0108fe5497, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF