Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
ISL80112IRAJZ-T
RENESAS · Linear Voltage Regulators (LDO) · DFN-10(3x3)
ISL80112IRAJZ-T from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output voltage pin, adjustable over a range of 0.5V to 3.3V. |
| 2 | VOUT | power_out | Output voltage pin, adjustable over a range of 0.5V to 3.3V. |
| 3 | ADJ | input | ADJ pin for externally setting VOUT through a resistor divider, with absolute maximum rating of -0.3V to +6V relative to GND. |
| 4 | VBIAS | power_in | Bias voltage pin for internal control circuits, with a range of 2.9V to 5.5V. |
| 5 | GND | power_in | Ground pin. |
| 6 | PG | output | Power-good open-drain output that goes logic low when VOUT is not in regulation, with a rated sink current of 10mA. |
| 7 | ENABLE | input | VIN-independent chip enable, TTL and CMOS compatible, with a range of 0V to VBIAS that must never exceed the voltage applied to VBIAS. |
| 8 | NC | unconnected | No connect pin. |
| 9 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 10 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 11 | EPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Relative to GND | VIN | -0.3 | 6 | V | Relative to GND | 4 | |
| VOUT Relative to GND | VOUT | -0.3 | 4 | V | Relative to GND | 4 | |
| PG, ENABLE, ADJ Relative to GND | -0.3 | 6 | V | Relative to GND (Note 5) | 4 | ||
| VBIAS Relative to GND | VBIAS | -0.3 | 6 | V | Relative to GND | 4 | |
| PG Rated Current | 10 | mA | 4 | ||||
| ESD Human Body Model | 4000 | V | Tested per JESD22-A114E | 4 | |||
| ESD Machine Model | 300 | V | Tested per JESD22-115-A | 4 | |||
| ESD Charged Device Model | 2000 | V | 4 | ||||
| Latch-up | 100 | mA | 4 | ||||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| VIN Relative to GND (ISL80112) | VIN | 3.6 | V | Minimum is VOUT + 0.25V (ISL80112) | 4 | ||
| Nominal VOUT Range minimum | VOUT | 500 | mV | Nominal VOUT Range | 4 | ||
| Nominal VOUT Range maximum | VOUT | 3.3 | V | Nominal VOUT Range | 4 | ||
| PG, ENABLE, ADJ, SS Relative to GND | 0 | 5.5 | V | Relative to GND | 4 | ||
| VBIAS Relative to GND | VBIAS | 0 | 5.5 | V | Relative to GND | 4 | |
| VBIAS UVLO Rising | UVLO_BIAS_r | 2.3 | 2.9 | V | VBIAS Rising | 4 | |
| VBIAS UVLO Falling | UVLO_BIAS_f | 1.55 | 2.1 | 2.8 | V | VBIAS Falling | 4 |
| DC ADJ Pin Voltage Accuracy | VADJ | 494 | 502 | 510 | mV | 0.7V VIN 3.6V, ILOAD 0A, 2.9V VBIAS 5.5V, VOUT = VADJ | 4 |
| DC Input Line Regulation | -0.18 | 0.02 | 0.18 | % | 2.9V VIN 3.6V, VOUT = 2.5V | 4 | |
| DC Bias Line Regulation | -0.28 | 0.06 | 0.28 | % | 4.5V<VBIAS<5.5V, VOUT = 2.5V | 4 | |
| DC Output Load Regulation | -0.4 | -0.04 | 0.4 | % | 0A ILOAD Full Load, VOUT = 2.5V | 4 | |
| Feedback Input Current | 10 | 80 | nA | VADJ = 0.5V | 4 | ||
| VIN Quiescent Current | IQ (VIN) | 8 | 10 | mA | VOUT = 2.5V | 4 | |
| Ground Pin Current in Shutdown | ISHDN | 3 | 20 | µA | ENABLE Pin = 0.2V, TJ = +125°C | 4 | |
| VIN Dropout Voltage (ISL80112) | VDO(VIN) | 53 | 115 | mV | ILOAD = 2A, VOUT = 2.5V, VBIAS = 4.5V (ISL80112) | 4 | |
| VBIAS Dropout Voltage (ISL80112) | VDO(BIAS) | 1.2 | 1.4 | V | ILOAD = 2A, VOUT = 2.5V (ISL80112) | 4 | |
| PG Flag Low Voltage | 90 | 130 | mV | ISINK = 500µA | 5 | ||
| PG Flag Leakage Current | 11 | 300 | nA | PG = 5V, VBIAS = 5.5V | 5 | ||
| PG Flag Sink Current | 7 | 10 | mA | 6 | |||
| Turn-on Threshold (Rising) | 400 | 680 | 850 | mV | VIN = 3.6V, VBIAS = 5.5V | 5 | |
| Enable Hysteresis | 60 | 260 | 330 | mV | VIN = 3.6V, VBIAS = 5.5V | 5 | |
| PG Flag Falling Threshold | PGTH | 71 | 82 | 93 | %VOUT | VBIAS = 5.5V | 5 |
| VIN Quiescent Current | IQ (VIN) | 10.6 | mA | VOUT = 3.3V, VIN = 3.6V, VBIAS = 5V | 4 | ||
| VIN Quiescent Current | IQ (VIN) | 3.5 | mA | VOUT = 1.0V, VIN = 1.4V, VBIAS = 3.3V | 5 | ||
| Output Short Circuit Current (2A Version) | ISC | 3.2 | A | VOUT = 0.2V (ISL80112) | 5 | ||
| PG Flag Hysteresis | PGHYS | 9.3 | %VOUT | VBIAS = 5.5V | 5 | ||
| Thermal Shutdown Temperature | TSD | 160 | °C | 5 | |||
| Thermal Shutdown Hysteresis | TSDn | 20 | °C | 5 | |||
| Input Supply Ripple Rejection | PSRR(VIN) | 80 | dB | f = 120Hz, ILOAD = 1A | 5 | ||
| Bias Supply Ripple Rejection | PSRR(VBIAS) | 60 | dB | f = 120Hz, ILOAD = 1A | 5 | ||
| Output Noise Voltage | eN(RMS) | 38 | µVRMS | BW = 100Hz f 100kHz, VBIAS = 2.9V, VIN = 1.6V, VOUT = 1.2V, ILOAD = 3A | 5 | ||
| Spectral Noise Density at 10Hz | eN | 3 | µV/√Hz | ILOAD = 3A, f = 10Hz, VBIAS = 2.9V, VIN = 1.6V, VOUT = 1.2V | 5 | ||
| Spectral Noise Density at 100Hz | eN | 1 | µV/√Hz | ILOAD = 3A, f = 100Hz, VBIAS = 2.9V, VIN = 1.6V, VOUT = 1.2V | 5 | ||
| EN Start-up Time | tEN | 50 | µs | COUT = 10µF, ILOAD = 1A | 5 | ||
| BIAS Start-up Time | tBIAS | 100 | µs | COUT = 10µF, EN = BIAS | 5 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 48 | °C/W | 10 Ld 3x3 DFN, Notes 6, 7 | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 4 | °C/W | 10 Ld 3x3 DFN | 4 | ||
| Thermal Resistance Junction-to-Board at Pin 3 | θJB | 14.7 | °C/W | at Pin 3 (Note 8) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 8. For θJB, the board temperature is taken on the board near the edge of the package, on a copper trace at either lead #3 or lead #5, as applicable. See | 4 |
CAD (KiCad official)
- Symbol:
ISL80112IRAJZ-T - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
isl80112irajz-t-etched.step/isl80112irajz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl80112irajz-t.step/isl80112irajz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (17 pp, sha256
d613b152e8e1b270, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).