main
Ray
Publish 0.1.0
e2ade97
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390
{
"slug": "isl78229arz-t7a",
"version": "0.1.0",
"type": "component",
"description": "RENESAS DC-DC Controllers, TQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"isl78229arz-t7a",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"isl78229arz-t7a.kicad_sym",
"isl78229arz-t7a.kicad_mod",
"isl78229arz-t7a.glb",
"isl78229arz-t7a.step",
"isl78229arz-t7a.lbr",
"docs/hero.png",
"docs/isl78229arz-t7a-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"isl78229arz-t7a-hero.glb",
"isl78229arz-t7a-hero.overlay.json",
"isl78229arz-t7a-etched.glb"
],
"component": {
"mpn": "ISL78229ARZ-T7A",
"manufacturer": "RENESAS",
"package": "TQFN-40-EP(6x6)",
"pin_count": 41,
"category": "Power Supply Chip",
"subcategory": "DC-DC Controllers",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/185dd4b7be431abb897e5427e3f57ed3.pdf",
"parts": {
"symbol": "isl78229arz-t7a.kicad_sym",
"footprint": "isl78229arz-t7a.kicad_mod",
"model_3d": "isl78229arz-t7a-hero.glb",
"model_3d_plain": "isl78229arz-t7a-etched.glb",
"model_3d_step": "isl78229arz-t7a-etched.step",
"model_3d_step_plain": "isl78229arz-t7a.step",
"lbr": "isl78229arz-t7a.lbr"
},
"distributor_links": {
"lcsc": "C2658061"
},
"distributor_check": {
"checked_at": "2026-10-27T09:46:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "SLOPE",
"type": "passive",
"description": "Programs the internal slope compensation slope via a resistor connected from SLOPE to GND."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Inverting input of the voltage-loop error amplifier, set by a resistor network to VOUT, also feeds the output OV and UV comparators."
},
{
"number": "3",
"name": "COMP",
"type": "output",
"description": "Output of the transconductance error amplifier Gm1 for the voltage loop, with the compensation network placed between COMP and ground."
},
{
"number": "4",
"name": "SS",
"type": "passive",
"description": "A capacitor from SS to ground sets the soft-start ramp rate and soft-start time (5µA charging current)."
},
{
"number": "5",
"name": "IMON",
"type": "output",
"description": "Average current monitor output for the sum of the two phase inductor currents (sum of CSA outputs plus 17µA offset), used for average current limiting and protection (fault above 2V)."
},
{
"number": "6",
"name": "TRACK",
"type": "input",
"description": "External reference input for the output voltage loop, analog or digital per ATRK/DTRK, connected to VCC if unused."
},
{
"number": "7",
"name": "ADDR1",
"type": "input",
"description": "Logic input that with ADDR2 selects one of four PMBus slave addresses."
},
{
"number": "8",
"name": "ADDR2",
"type": "input",
"description": "Logic input that with ADDR1 selects one of four PMBus slave addresses."
},
{
"number": "9",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power-good output, pulled up to VCC, high when output is within OV/UV thresholds and soft-start is completed."
},
{
"number": "10",
"name": "FSYNC",
"type": "bidirectional",
"description": "Sets switching frequency (50kHz to 1.1MHz) via a resistor to ground, or synchronizes to an external clock (minimum pulse width 20ns)."
},
{
"number": "11",
"name": "SGND",
"type": "power_in",
"description": "Signal ground for internal sensitive analog circuits, connect to a large quiet copper ground plane."
},
{
"number": "12",
"name": "SDA",
"type": "bidirectional",
"description": "Serial bus data input/output that requires a pull-up."
},
{
"number": "13",
"name": "SCL",
"type": "input",
"description": "Serial bus clock input that requires a pull-up."
},
{
"number": "14",
"name": "SALERT",
"type": "output",
"description": "PMBus alert open-drain output pulled low when a fault is detected, requires a pull-up."
},
{
"number": "15",
"name": "NTC",
"type": "input",
"description": "External temperature sensor input with 20µA current source out of the pin through an NTC resistor to GND, read by the internal ADC."
},
{
"number": "16",
"name": "DE/PHDRP",
"type": "input",
"description": "Selects Diode Emulation, DE plus phase dropping, or CCM mode (VCC, FLOAT, or GND)."
},
{
"number": "17",
"name": "RBLANK",
"type": "passive",
"description": "A resistor to ground programs the current-sense blanking time (minimum on-time) after LG turns on."
},
{
"number": "18",
"name": "PLLCOMP",
"type": "passive",
"description": "Compensation node for the switching clock PLL, using a second-order passive loop filter to ground."
},
{
"number": "19",
"name": "EN",
"type": "input",
"description": "Threshold-sensitive enable input, enables above 1.2V and disables below 0.95V clearing all fault states."
},
{
"number": "20",
"name": "CLKOUT",
"type": "output",
"description": "Clock output at one phase's switching frequency delayed 90° from LG1 rising edge, for 4-phase operation via the second IC's FSYNC."
},
{
"number": "21",
"name": "BOOT2",
"type": "power_in",
"description": "Bias supply for the Phase 2 high-side driver, with recommended 0.47µF capacitor in series with 1.5Ω to PH2, or tied to ground to disable high-side drivers."
},
{
"number": "22",
"name": "UG2",
"type": "output",
"description": "Phase 2 high-side gate driver output."
},
{
"number": "23",
"name": "PH2",
"type": "passive",
"description": "Phase 2 high-side gate drive return, connected to the high-side MOSFET source and low-side MOSFET drain."
},
{
"number": "24",
"name": "LG2",
"type": "output",
"description": "Phase 2 low-side gate driver output connected to the Phase 2 low-side MOSFET gates."
},
{
"number": "25",
"name": "PGND",
"type": "power_in",
"description": "Return path for the low-side MOSFET drivers, connected to the ground plane through several vias close to the IC."
},
{
"number": "26",
"name": "PVCC",
"type": "power_out",
"description": "Output of the internal linear regulator biasing drivers and VCC, operating range 4.75V to 5.5V with minimum 10µF decoupling to PGND."
},
{
"number": "27",
"name": "LG1",
"type": "output",
"description": "Phase 1 low-side gate driver output connected to the Phase 1 low-side MOSFET gates."
},
{
"number": "28",
"name": "PH1",
"type": "passive",
"description": "Phase 1 high-side gate drive return, connected to the high-side MOSFET source and low-side MOSFET drain."
},
{
"number": "29",
"name": "UG1",
"type": "output",
"description": "Phase 1 high-side MOSFET gate drive output."
},
{
"number": "30",
"name": "BOOT1",
"type": "power_in",
"description": "Bias supply for the Phase 1 high-side driver, with recommended 0.47µF capacitor in series with 1.5Ω to PH1, or tied to ground to disable high-side drivers."
},
{
"number": "31",
"name": "VIN",
"type": "power_in",
"description": "Supply input to the internal linear regulator, not to exceed 55V in normal operation and withstands transients up to 60V."
},
{
"number": "32",
"name": "ISEN1N",
"type": "input",
"description": "Negative input to the Phase 1 current sense amplifier sensing inductor current through a series sense resistor."
},
{
"number": "33",
"name": "ISEN1P",
"type": "input",
"description": "Positive input to the Phase 1 current sense amplifier."
},
{
"number": "34",
"name": "ISEN2N",
"type": "input",
"description": "Negative input to the Phase 2 current sense amplifier sensing inductor current through a series sense resistor."
},
{
"number": "35",
"name": "ISEN2P",
"type": "input",
"description": "Positive input to the Phase 2 current sense amplifier."
},
{
"number": "36",
"name": "NC",
"type": "unconnected",
"description": "Not electrically connected internally."
},
{
"number": "37",
"name": "HIC/LATCH",
"type": "input",
"description": "Selects Hiccup (HIGH) or Latch-off (LOW) response to faults."
},
{
"number": "38",
"name": "ATRK/DTRK",
"type": "input",
"description": "Selects TRACK pin input format, HIGH for analog and LOW for digital signals."
},
{
"number": "39",
"name": "RDT",
"type": "passive",
"description": "A resistor to ground programs the dead times between UGx and LGx transitions to prevent shoot-through."
},
{
"number": "40",
"name": "VCC",
"type": "power_in",
"description": "Bias power input for internal analog circuitry, 4.75V to 5.5V, with minimum 1µF ceramic decoupling."
},
{
"number": "41",
"name": "PAD",
"type": "passive",
"description": "Bottom thermal pad, not an electrical connection, to be connected to a large PCB ground copper plane with multiple vias."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed pad is listed as 'PAD' with no pin number; number '41' was assigned by convention (N+1). Dat; Pin types for passive-programming pins (SLOPE, RBLANK, PLLCOMP, RDT, SS) and PH1/PH2, BOOT1/BOOT2 ar"
],
"pages_sent": 36,
"cost_usd": 0.5517,
"at": "2026-10-27T09:45:48"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/185dd4b7be431abb897e5427e3f57ed3.pdf",
"pages": 72,
"sha256": "bf1d64560e236c82",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 41,
"described": 41,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "isl78229arz-t7a.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
6.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e5b4286c2329085d9ef7f90d5eb5bf41a435241ecc1baaf1383823b6d6a946ae",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "isl78229arz-t7a-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
6.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9a5f19fec661a4e080b74e1040b37cfb295d19f99ad9f24689d60b9d7b819996",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}