main
Ray
Publish 0.1.0
db8c895
ISL6292-2CR3Z-T
RENESAS · Battery Management ICs · DFN-10(3x3)
ISL6292-2CR3Z-T from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input power source connected to the wall adapter, with recommended operating range of 4.3V to 6.5V. |
| 2 | FAULT | output | Open-drain output that is pulled LOW under any fault condition (battery temperature fault, charge time fault, or battery removal). |
| 3 | STATUS | output | Open-drain output indicating charging and inhibit states, pulled LOW while the charger is charging a battery. |
| 4 | TIME | passive | Connect a timing capacitor to GND to set the oscillation period, which also provides the charger's time reference. |
| 5 | GND | power_in | Connection to system ground. |
| 6 | EN | input | Enable logic input; connect LOW to disable the charger or leave floating to enable it. |
| 7 | V2P8 | power_out | 2.8V reference voltage output that is present when VIN is above the POR threshold and zero otherwise, able to source 2mA and usable as adapter-presence indication. |
| 8 | IREF | input | Programming input for the constant charge current, set by a resistor to GND or by driving the pin above 1.3V or below 0.4V. |
| 9 | TEMP | input | Input for an external NTC thermistor for battery temperature monitoring, also used for battery removal detection. |
| 10 | VBAT | power_out | Connection to the battery, needing a 10µF tantalum capacitor with no battery attached or only a 0.1µF ceramic capacitor when a battery is attached. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rising VIN Threshold | 3 | 3.4 | 4 | V | 6 | ||
| Falling VIN Threshold | 2.11 | 2.4 | 2.65 | V | 6 | ||
| VBAT Pin Sink Current | ISTANDBY | 3 | µA | VIN floating or EN = LOW | 6 | ||
| Output Voltage ISL6292-2 | VCH | 4.158 | 4.2 | 4.242 | V | ISL6292-2 | 6 |
| Constant Charge Current | ICHARGE | 0.9 | 1 | 1.1 | A | RIREF = 80k, VBAT = 3.7V | 6 |
| Constant Charge Current | ICHARGE | 400 | 450 | 520 | mA | IREF Pin Voltage > 1.2V, VBAT = 3.7V | 6 |
| Constant Charge Current | ICHARGE | 100 | mA | IREF Pin Voltage < 0.4V, VBAT = 3.7V | 6 | ||
| End-of-Charge Threshold | 85 | 110 | 135 | mA | RIMIN = 80k | 6 | |
| Trickle Charge Threshold Voltage | VMIN | 2.7 | 2.8 | 3 | V | 7 | |
| Low Battery Temperature Threshold | VTMIN | 1.45 | 1.51 | 1.57 | V | V2P8 = 3.0V | 7 |
| High Battery Temperature Threshold | VTMAX | 0.36 | 0.38 | 0.4 | V | V2P8 = 3.0V | 7 |
| Charge Current Foldback Threshold | TFOLD | 85 | 100 | 115 | °C | 7 | |
| Oscillation Period | tOSC | 2.4 | 3 | 3.6 | ms | CTIME = 15nF | 7 |
| TOEN Input High | 2 | V | 7 | ||||
| TOEN and EN Input Low | 0.8 | V | 7 | ||||
| IREF and IMIN Input High | 1.2 | V | 7 | ||||
| IREF and IMIN Input Low | 0.4 | V | 7 | ||||
| STATUS/FAULT Sink Current | 5 | mA | Pin Voltage = 0.8V | 7 | |||
| Supply Voltage | VIN | 4.3 | 6.5 | V | 6 | ||
| Ambient Temperature Range | -20 | 70 | °C | 6 | |||
| Supply Voltage | VIN | -0.3 | 7 | V | 6 | ||
| Output Pin Voltage (BAT) | -0.3 | 5.5 | V | 6 | |||
| Signal Input Voltage (TOEN, TIME, IREF, IMIN) | -0.3 | 3.2 | V | 6 | |||
| Output Pin Voltage (STATUS, FAULT) | -0.3 | 7 | V | 6 | |||
| Charge Current (3x3 DFN Package) | 1.6 | A | 3x3 DFN Package | 6 | |||
| Maximum Junction Temperature | 150 | °C | Plastic Package | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Thermal Resistance Junction to Ambient | θJA | 46 | °C/W | 3x3 DFN Package | 6 | ||
| Thermal Resistance Junction to Case | θJC | 4 | °C/W | 3x3 DFN Package | 6 | ||
| VIN Pin Supply Current | IVIN | 30 | µA | VBAT floating and EN pulled low | 6 | ||
| VIN Pin Supply Current | IVIN | 1 | mA | VBAT floating and EN floating | 6 | ||
| Dropout Voltage | 175 | mV | VBAT = 3.7V, 0.5A, 3x3 package | 6 | |||
| Trickle Charge Current | ITRICKLE | 110 | mA | RIREF = 80k, VBAT = 2.0V | 6 | ||
| Trickle Charge Current | ITRICKLE | 45 | mA | IREF Pin Voltage > 1.2V, VBAT = 2.0V | 6 | ||
| Trickle Charge Current | ITRICKLE | 10 | mA | IREF Pin Voltage < 0.4V, VBAT = 2.0V | 6 | ||
| Recharge Voltage Threshold | VRECHRG | 4 | V | ISL6292-2 | 6 | ||
| Battery Removal Threshold | VRMV | 2.25 | V | V2P8 = 3.0V | 7 | ||
| Current Foldback Gain | GFOLD | 100 | mA/°C | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | two rows. Since the pins on the 3x3 DFN package are on only two sides, as much top layer copper as possible should be | 18 |
CAD (KiCad official)
- Symbol:
ISL6292-2CR3Z-T - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
isl6292-2cr3z-t-etched.step/isl6292-2cr3z-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl6292-2cr3z-t.step/isl6292-2cr3z-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (23 pp, sha256
77002944cc3316e6, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL6292-2CR3Z-T
**RENESAS** · Battery Management ICs · DFN-10(3x3)
ISL6292-2CR3Z-T from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input power source connected to the wall adapter, with recommended operating range of 4.3V to 6.5V. |
| 2 | FAULT | output | Open-drain output that is pulled LOW under any fault condition (battery temperature fault, charge time fault, or battery removal). |
| 3 | STATUS | output | Open-drain output indicating charging and inhibit states, pulled LOW while the charger is charging a battery. |
| 4 | TIME | passive | Connect a timing capacitor to GND to set the oscillation period, which also provides the charger's time reference. |
| 5 | GND | power_in | Connection to system ground. |
| 6 | EN | input | Enable logic input; connect LOW to disable the charger or leave floating to enable it. |
| 7 | V2P8 | power_out | 2.8V reference voltage output that is present when VIN is above the POR threshold and zero otherwise, able to source 2mA and usable as adapter-presence indication. |
| 8 | IREF | input | Programming input for the constant charge current, set by a resistor to GND or by driving the pin above 1.3V or below 0.4V. |
| 9 | TEMP | input | Input for an external NTC thermistor for battery temperature monitoring, also used for battery removal detection. |
| 10 | VBAT | power_out | Connection to the battery, needing a 10µF tantalum capacitor with no battery attached or only a 0.1µF ceramic capacitor when a battery is attached. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rising VIN Threshold | | 3 | 3.4 | 4 | V | | 6 |
| Falling VIN Threshold | | 2.11 | 2.4 | 2.65 | V | | 6 |
| VBAT Pin Sink Current | ISTANDBY | | | 3 | µA | VIN floating or EN = LOW | 6 |
| Output Voltage ISL6292-2 | VCH | 4.158 | 4.2 | 4.242 | V | ISL6292-2 | 6 |
| Constant Charge Current | ICHARGE | 0.9 | 1 | 1.1 | A | RIREF = 80k, VBAT = 3.7V | 6 |
| Constant Charge Current | ICHARGE | 400 | 450 | 520 | mA | IREF Pin Voltage > 1.2V, VBAT = 3.7V | 6 |
| Constant Charge Current | ICHARGE | | | 100 | mA | IREF Pin Voltage < 0.4V, VBAT = 3.7V | 6 |
| End-of-Charge Threshold | | 85 | 110 | 135 | mA | RIMIN = 80k | 6 |
| Trickle Charge Threshold Voltage | VMIN | 2.7 | 2.8 | 3 | V | | 7 |
| Low Battery Temperature Threshold | VTMIN | 1.45 | 1.51 | 1.57 | V | V2P8 = 3.0V | 7 |
| High Battery Temperature Threshold | VTMAX | 0.36 | 0.38 | 0.4 | V | V2P8 = 3.0V | 7 |
| Charge Current Foldback Threshold | TFOLD | 85 | 100 | 115 | °C | | 7 |
| Oscillation Period | tOSC | 2.4 | 3 | 3.6 | ms | CTIME = 15nF | 7 |
| TOEN Input High | | 2 | | | V | | 7 |
| TOEN and EN Input Low | | | | 0.8 | V | | 7 |
| IREF and IMIN Input High | | 1.2 | | | V | | 7 |
| IREF and IMIN Input Low | | | | 0.4 | V | | 7 |
| STATUS/FAULT Sink Current | | 5 | | | mA | Pin Voltage = 0.8V | 7 |
| Supply Voltage | VIN | 4.3 | | 6.5 | V | | 6 |
| Ambient Temperature Range | | -20 | | 70 | °C | | 6 |
| Supply Voltage | VIN | -0.3 | | 7 | V | | 6 |
| Output Pin Voltage (BAT) | | -0.3 | | 5.5 | V | | 6 |
| Signal Input Voltage (TOEN, TIME, IREF, IMIN) | | -0.3 | | 3.2 | V | | 6 |
| Output Pin Voltage (STATUS, FAULT) | | -0.3 | | 7 | V | | 6 |
| Charge Current (3x3 DFN Package) | | | | 1.6 | A | 3x3 DFN Package | 6 |
| Maximum Junction Temperature | | | | 150 | °C | Plastic Package | 6 |
| Storage Temperature Range | | -65 | | 150 | °C | | 6 |
| Thermal Resistance Junction to Ambient | θJA | | 46 | | °C/W | 3x3 DFN Package | 6 |
| Thermal Resistance Junction to Case | θJC | | 4 | | °C/W | 3x3 DFN Package | 6 |
| VIN Pin Supply Current | IVIN | | 30 | | µA | VBAT floating and EN pulled low | 6 |
| VIN Pin Supply Current | IVIN | | 1 | | mA | VBAT floating and EN floating | 6 |
| Dropout Voltage | | | 175 | | mV | VBAT = 3.7V, 0.5A, 3x3 package | 6 |
| Trickle Charge Current | ITRICKLE | | 110 | | mA | RIREF = 80k, VBAT = 2.0V | 6 |
| Trickle Charge Current | ITRICKLE | | 45 | | mA | IREF Pin Voltage > 1.2V, VBAT = 2.0V | 6 |
| Trickle Charge Current | ITRICKLE | | 10 | | mA | IREF Pin Voltage < 0.4V, VBAT = 2.0V | 6 |
| Recharge Voltage Threshold | VRECHRG | | 4 | | V | ISL6292-2 | 6 |
| Battery Removal Threshold | VRMV | | 2.25 | | V | V2P8 = 3.0V | 7 |
| Current Foldback Gain | GFOLD | | 100 | | mA/°C | | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | two rows. Since the pins on the 3x3 DFN package are on only two sides, as much top layer copper as possible should be | 18 |
## CAD (KiCad official)
- Symbol: `ISL6292-2CR3Z-T`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files: `isl6292-2cr3z-t-etched.step` / `isl6292-2cr3z-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl6292-2cr3z-t.step` / `isl6292-2cr3z-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/isl6292-2cr3z-t-datasheet.pdf) (23 pp, sha256 `77002944cc3316e6`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl6292-2cr3z-t-datasheet.pdf)