main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers isl6292-2cr3z-t: viewers · Ray
isl6292-2cr3z-t-etched.glb Publish 0.1.0 · Ray
isl6292-2cr3z-t-etched.step isl6292-2cr3z-t: factory component page (tier=lcsc) · Ray
isl6292-2cr3z-t-hero.glb isl6292-2cr3z-t: hero GLB from the etched model (keeps the MPN mark) · Ray
isl6292-2cr3z-t-hero.overlay.json Publish 0.1.0 · Ray
isl6292-2cr3z-t.glb Publish 0.1.0 · Ray
isl6292-2cr3z-t.kicad_mod Publish 0.1.0 · Ray
isl6292-2cr3z-t.kicad_sym Publish 0.1.0 · Ray
isl6292-2cr3z-t.lbr Publish 0.1.0 · Ray
isl6292-2cr3z-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 11 pins · Ray

ISL6292-2CR3Z-T

RENESAS · Battery Management ICs · DFN-10(3x3)

ISL6292-2CR3Z-T from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input power source connected to the wall adapter, with recommended operating range of 4.3V to 6.5V.
2 FAULT output Open-drain output that is pulled LOW under any fault condition (battery temperature fault, charge time fault, or battery removal).
3 STATUS output Open-drain output indicating charging and inhibit states, pulled LOW while the charger is charging a battery.
4 TIME passive Connect a timing capacitor to GND to set the oscillation period, which also provides the charger's time reference.
5 GND power_in Connection to system ground.
6 EN input Enable logic input; connect LOW to disable the charger or leave floating to enable it.
7 V2P8 power_out 2.8V reference voltage output that is present when VIN is above the POR threshold and zero otherwise, able to source 2mA and usable as adapter-presence indication.
8 IREF input Programming input for the constant charge current, set by a resistor to GND or by driving the pin above 1.3V or below 0.4V.
9 TEMP input Input for an external NTC thermistor for battery temperature monitoring, also used for battery removal detection.
10 VBAT power_out Connection to the battery, needing a 10µF tantalum capacitor with no battery attached or only a 0.1µF ceramic capacitor when a battery is attached.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package DFN-10(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rising VIN Threshold 3 3.4 4 V 6
Falling VIN Threshold 2.11 2.4 2.65 V 6
VBAT Pin Sink Current ISTANDBY 3 µA VIN floating or EN = LOW 6
Output Voltage ISL6292-2 VCH 4.158 4.2 4.242 V ISL6292-2 6
Constant Charge Current ICHARGE 0.9 1 1.1 A RIREF = 80k, VBAT = 3.7V 6
Constant Charge Current ICHARGE 400 450 520 mA IREF Pin Voltage > 1.2V, VBAT = 3.7V 6
Constant Charge Current ICHARGE 100 mA IREF Pin Voltage < 0.4V, VBAT = 3.7V 6
End-of-Charge Threshold 85 110 135 mA RIMIN = 80k 6
Trickle Charge Threshold Voltage VMIN 2.7 2.8 3 V 7
Low Battery Temperature Threshold VTMIN 1.45 1.51 1.57 V V2P8 = 3.0V 7
High Battery Temperature Threshold VTMAX 0.36 0.38 0.4 V V2P8 = 3.0V 7
Charge Current Foldback Threshold TFOLD 85 100 115 °C 7
Oscillation Period tOSC 2.4 3 3.6 ms CTIME = 15nF 7
TOEN Input High 2 V 7
TOEN and EN Input Low 0.8 V 7
IREF and IMIN Input High 1.2 V 7
IREF and IMIN Input Low 0.4 V 7
STATUS/FAULT Sink Current 5 mA Pin Voltage = 0.8V 7
Supply Voltage VIN 4.3 6.5 V 6
Ambient Temperature Range -20 70 °C 6
Supply Voltage VIN -0.3 7 V 6
Output Pin Voltage (BAT) -0.3 5.5 V 6
Signal Input Voltage (TOEN, TIME, IREF, IMIN) -0.3 3.2 V 6
Output Pin Voltage (STATUS, FAULT) -0.3 7 V 6
Charge Current (3x3 DFN Package) 1.6 A 3x3 DFN Package 6
Maximum Junction Temperature 150 °C Plastic Package 6
Storage Temperature Range -65 150 °C 6
Thermal Resistance Junction to Ambient θJA 46 °C/W 3x3 DFN Package 6
Thermal Resistance Junction to Case θJC 4 °C/W 3x3 DFN Package 6
VIN Pin Supply Current IVIN 30 µA VBAT floating and EN pulled low 6
VIN Pin Supply Current IVIN 1 mA VBAT floating and EN floating 6
Dropout Voltage 175 mV VBAT = 3.7V, 0.5A, 3x3 package 6
Trickle Charge Current ITRICKLE 110 mA RIREF = 80k, VBAT = 2.0V 6
Trickle Charge Current ITRICKLE 45 mA IREF Pin Voltage > 1.2V, VBAT = 2.0V 6
Trickle Charge Current ITRICKLE 10 mA IREF Pin Voltage < 0.4V, VBAT = 2.0V 6
Recharge Voltage Threshold VRECHRG 4 V ISL6292-2 6
Battery Removal Threshold VRMV 2.25 V V2P8 = 3.0V 7
Current Foldback Gain GFOLD 100 mA/°C 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper two rows. Since the pins on the 3x3 DFN package are on only two sides, as much top layer copper as possible should be 18

CAD (KiCad official)

  • Symbol: ISL6292-2CR3Z-T
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: isl6292-2cr3z-t-etched.step / isl6292-2cr3z-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl6292-2cr3z-t.step / isl6292-2cr3z-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (23 pp, sha256 77002944cc3316e6, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF