Generated by kicad-footprint-generator · KiCad file format 20260206
ISL59885ISZ-T7
RENESAS · Video Interface ICs · SOIC-8
ISL59885ISZ-T7 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Composite Sync Out | output | Composite sync pulse output; sync pulses start on a falling edge and end on a rising edge, and the output is held low on loss of sync. |
| 2 | Composite Video In | input | AC-coupled composite video input clamped to about 1.5V sync tip reference; sync tip must be at the lowest potential (positive picture phase), with input amplitude 0.5VP-P to 2VP-P. |
| 3 | Vertical Sync Out | output | Vertical sync pulse output; the falling edge of vertical sync is the start of the vertical period. |
| 4 | GND | power_in | Supply ground. |
| 5 | HD | output | HD detect output, low when input horizontal frequency is greater than 25kHz. |
| 6 | CSET | passive | External capacitor to ground (56nF recommended, X7R or better) that bypasses the internal bias generator. |
| 7 | Horizontal Output | output | Horizontal sync output with falling edge active, nominal pulse width 5.2µs, held high on loss of composite sync. |
| 8 | VDD | power_in | Positive supply, single 3V to 5V (7V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent supply current | IDD | 1 | 2.2 | 4 | mA | VDD = 3.3V | 3 |
| Clamp Voltage | 1.35 | 1.5 | 1.65 | V | Pin 2, ILOAD = -100µA | 3 | |
| Clamp Discharge Current | 6 | 15 | 30 | µA | Pin 2 = 2V | 3 | |
| Clamp Charge Current | -9 | -7.2 | -5.2 | mA | Pin 2 = 1V | 3 | |
| Output Low Voltage | VOL | 0.24 | 0.5 | V | IOL = 1.6mA | 3 | |
| Output High Voltage | VOH | 3 | 3.2 | V | IOH = -40µA | 3 | |
| Output High Voltage | VOH | 2.5 | 3 | V | IOH = -1.6mA | 3 | |
| Comp Sync Prop Delay | tCS | 35 | 75 | ns | See Figure 8 | 3 | |
| Horizontal Sync Delay | tHS | 40 | 80 | ns | See Figure 8 | 3 | |
| Horizontal Sync Width | tHS-PW | 3.8 | 5.2 | 6.2 | µs | See Figure 8 | 3 |
| Vertical Sync Width | tVS | 230 | 280 | 350 | µs | Normal or default trigger, 50% to 50% (see Figure 7) | 3 |
| Vertical Sync Default Delay | tVSD | 28 | 50 | 68 | µs | See Figure 9 | 3 |
| Hsync Blanking Window | 70 | 80 | 90 | % | 3 | ||
| Input Dynamic Range | 0.5 | 2 | VP-P | Video input amplitude to maintain slice level spec, VDD = 3.3V | 3 | ||
| Slice Level | VSLICE | 50 | 70 | 90 | mV | VSLICE above VCLAMP | 3 |
| HD Pin Level | 0 | V | 720p, 1080i, 1080p | 3 | |||
| VDD Supply | VDD | 7 | V | TA = +25°C | 3 | ||
| Pin Voltages | -0.5 | V | -0.5V to VCC +0.5V | 3 | |||
| Operating Ambient Temperature Range | -40 | 85 | °C | 3 | |||
| Operating Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Thermal Resistance Junction to Ambient | θJA | 120 | °C/W | 8 Ld SOIC Package | 3 | ||
| Thermal Resistance Junction to Case | θJC | 66 | °C/W | 8 Ld SOIC Package | 3 |
CAD (KiCad official)
- Symbol:
ISL59885ISZ-T7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl59885isz-t7-etched.step/isl59885isz-t7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl59885isz-t7.step/isl59885isz-t7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (15 pp, sha256
c41df2dfc99c474c, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).