Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL59885ISZ-T7

RENESAS · Video Interface ICs · SOIC-8

ISL59885ISZ-T7 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Composite Sync Out output Composite sync pulse output; sync pulses start on a falling edge and end on a rising edge, and the output is held low on loss of sync.
2 Composite Video In input AC-coupled composite video input clamped to about 1.5V sync tip reference; sync tip must be at the lowest potential (positive picture phase), with input amplitude 0.5VP-P to 2VP-P.
3 Vertical Sync Out output Vertical sync pulse output; the falling edge of vertical sync is the start of the vertical period.
4 GND power_in Supply ground.
5 HD output HD detect output, low when input horizontal frequency is greater than 25kHz.
6 CSET passive External capacitor to ground (56nF recommended, X7R or better) that bypasses the internal bias generator.
7 Horizontal Output output Horizontal sync output with falling edge active, nominal pulse width 5.2µs, held high on loss of composite sync.
8 VDD power_in Positive supply, single 3V to 5V (7V absolute maximum).

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Communication Interface Chip/UART/485/232
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent supply current IDD 1 2.2 4 mA VDD = 3.3V 3
Clamp Voltage 1.35 1.5 1.65 V Pin 2, ILOAD = -100µA 3
Clamp Discharge Current 6 15 30 µA Pin 2 = 2V 3
Clamp Charge Current -9 -7.2 -5.2 mA Pin 2 = 1V 3
Output Low Voltage VOL 0.24 0.5 V IOL = 1.6mA 3
Output High Voltage VOH 3 3.2 V IOH = -40µA 3
Output High Voltage VOH 2.5 3 V IOH = -1.6mA 3
Comp Sync Prop Delay tCS 35 75 ns See Figure 8 3
Horizontal Sync Delay tHS 40 80 ns See Figure 8 3
Horizontal Sync Width tHS-PW 3.8 5.2 6.2 µs See Figure 8 3
Vertical Sync Width tVS 230 280 350 µs Normal or default trigger, 50% to 50% (see Figure 7) 3
Vertical Sync Default Delay tVSD 28 50 68 µs See Figure 9 3
Hsync Blanking Window 70 80 90 % 3
Input Dynamic Range 0.5 2 VP-P Video input amplitude to maintain slice level spec, VDD = 3.3V 3
Slice Level VSLICE 50 70 90 mV VSLICE above VCLAMP 3
HD Pin Level 0 V 720p, 1080i, 1080p 3
VDD Supply VDD 7 V TA = +25°C 3
Pin Voltages -0.5 V -0.5V to VCC +0.5V 3
Operating Ambient Temperature Range -40 85 °C 3
Operating Junction Temperature 150 °C 3
Storage Temperature -65 150 °C 3
Thermal Resistance Junction to Ambient θJA 120 °C/W 8 Ld SOIC Package 3
Thermal Resistance Junction to Case θJC 66 °C/W 8 Ld SOIC Package 3

CAD (KiCad official)

  • Symbol: ISL59885ISZ-T7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: isl59885isz-t7-etched.step / isl59885isz-t7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl59885isz-t7.step / isl59885isz-t7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (15 pp, sha256 c41df2dfc99c474c, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF