ISL3159EFBZ

{
  "schema_version": 1,
  "type": "component",
  "slug": "isl3159efbz",
  "title": "ISL3159EFBZ",
  "brief": "RENESAS Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface ics",
    "isl3159efbz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ISL3159EFBZ",
    "manufacturer": "RENESAS",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/75d9f3dc000588acb5131dc8c0f7ab4c.pdf",
    "parts": {
      "symbol": "isl3159efbz.kicad_sym",
      "footprint": "isl3159efbz.kicad_mod",
      "model_3d": "isl3159efbz-hero.glb",
      "model_3d_plain": "isl3159efbz-etched.glb",
      "model_3d_step": "isl3159efbz-etched.step",
      "model_3d_step_plain": "isl3159efbz.step",
      "lbr": "isl3159efbz.lbr"
    },
    "distributor_links": {
      "lcsc": "C1544972",
      "digikey": "ISL3159EFBZ-ND",
      "mouser": "968-ISL3159EFBZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T18:36:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ISL3159EFBZ-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-ISL3159EFBZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output: RO is high if A-B ≥ -50mV, low if A-B ≤ -200mV, and high when A and B are floating, shorted, or connected to a terminated bus that is undriven."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high; connect RE directly to GND if the Rx enable function is not required."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver output enable: outputs Y and Z are enabled when DE is high and are high impedance when DE is low; if the Tx enable function is not required, connect DE to VCC through a 1kΩ or greater resistor."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver input: a low on DI forces output Y low and Z high, and a high on DI forces Y high and Z low."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "6",
        "name": "A/Y",
        "type": "bidirectional",
        "description": "±15kV IEC61000 ESD protected RS-485/422 level pin: noninverting receiver input (A) when DE = 0 and noninverting driver output (Y) when DE = 1."
      },
      {
        "number": "7",
        "name": "B/Z",
        "type": "bidirectional",
        "description": "±15kV IEC61000 ESD protected RS-485/422 level pin: inverting receiver input (B) when DE = 0 and inverting driver output (Z) when DE = 1."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "System power supply input, 4.5V to 5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: A/Y and B/Z are direction-dependent (input when DE = 0, output when DE = 1); typed as bidirectional,; Only the 8 Ld SOIC pin configuration (page 2) and pin descriptions (page 3) were used; the pinout is"
        ],
        "pages_sent": 10,
        "cost_usd": 0.059,
        "at": "2026-10-30T18:36:21"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/75d9f3dc000588acb5131dc8c0f7ab4c.pdf",
        "pages": 17,
        "sha256": "65ea123efd3f86fe",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "isl3159efbz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl3159efbz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7d4154d8e4c6e664edf9d691f62adc1b43f2b917d20e6f85d7807a6f62aecab8",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "M8.15",
      "source_page": 17,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4
        ]
      },
      "E": {
        "nom_mm": 6,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.55,
        "range_mm": [
          1.35,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "isl3159efbz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "RENESAS",
      "Package": "SOIC-8",
      "Category": "Interface ICs",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "65ea123efd3f86fe51c4efda4ebffefe9b525e0b4803a0bb185a5da9927bbe32",
      "rows": [
        {
          "name": "Driver Differential VOUT, RL = 100 Ω (RS-422)",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": 2.6,
          "typ": 3.4,
          "max": null,
          "conditions": "RL = 100Ω (RS-422) (Figure 3A)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver Differential VOUT, RL = 54 Ω (RS-485), F suffix",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": 2.1,
          "typ": 2.8,
          "max": null,
          "conditions": "RL = 54Ω (RS-485) (Figure 3A); F Suffix, Note 18: VCC = 5V ±5%",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver Differential VOUT, RL = 60 Ω, common-mode load",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": 1.9,
          "typ": 2.7,
          "max": null,
          "conditions": "RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 3B, Note 18)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Change in Magnitude of Driver Differential VOUT for Complementary Output States",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.01,
          "max": 0.2,
          "conditions": "RL = 54Ω or 100Ω (Figure 3A)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver Common-Mode VOUT",
          "symbol": "VOC",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 2,
          "max": 3,
          "conditions": "RL = 54Ω or 100Ω (Figure 3A, Note 18)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States",
          "symbol": "VOC",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.01,
          "max": 0.2,
          "conditions": "RL = 54Ω or 100Ω (Figure 3A)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Logic Input High Voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "DI, DE, RE",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Logic Input Low Voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "DI, DE, RE",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Logic Input Current",
          "symbol": "IIN1",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "DI = DE = RE = 0V or VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input Current (A/Y, B/Z), VIN = 12V",
          "symbol": "IIN2",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 220,
          "conditions": "DE = 0V, VCC = 0V or 5.5V, VIN = 12V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input Current (A/Y, B/Z), VIN = -7V",
          "symbol": "IIN2",
          "kind": "electrical",
          "unit": "µA",
          "min": -160,
          "typ": null,
          "max": null,
          "conditions": "DE = 0V, VCC = 0V or 5.5V, VIN = -7V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver Short-Circuit Current, VO = High or Low",
          "symbol": "IOSD1",
          "kind": "electrical",
          "unit": "mA",
          "min": -250,
          "typ": null,
          "max": 250,
          "conditions": "DE = VCC, -7V ≤ VY or VZ ≤ 12V (Note 11)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver Differential Threshold Voltage",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "mV",
          "min": -200,
          "typ": null,
          "max": -50,
          "conditions": "-7V ≤ VCM ≤ 12V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver Output Low Voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IO = +10mA, VID = -200mV",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Output Low Current",
          "symbol": "IOL",
          "kind": "electrical",
          "unit": "mA",
          "min": 25,
          "typ": 40,
          "max": null,
          "conditions": "VOL = 1V, VID = -200mV",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Three-state (high impedance) Receiver Output Current",
          "symbol": "IOZR",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": 0.015,
          "max": 1,
          "conditions": "0.4V ≤ VO ≤ 2.4V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Input Resistance",
          "symbol": "RIN",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 54,
          "typ": 80,
          "max": null,
          "conditions": "-7V ≤ VCM ≤ 12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Short-Circuit Current",
          "symbol": "IOSR",
          "kind": "electrical",
          "unit": "mA",
          "min": -20,
          "typ": null,
          "max": 110,
          "conditions": "0V ≤ VO ≤ VCC",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "No-Load Supply Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 2.6,
          "max": 4,
          "conditions": "DI = DE = 0V or VCC (Note 10)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Shutdown Supply Current",
          "symbol": "ISHDN",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.05,
          "max": 1,
          "conditions": "DE = 0V, RE = VCC, DI = 0V or VCC",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Maximum Data Rate (driver)",
          "symbol": "fMAX",
          "kind": "timing",
          "unit": "Mbps",
          "min": 40,
          "typ": null,
          "max": null,
          "conditions": "VOD ≥ ±1.5V, RD = 54Ω, CL = 100pF (Figure 6)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Differential Output Delay",
          "symbol": "tDD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 8,
          "max": 12,
          "conditions": "RD = 54Ω, CD = 50pF (Figure 4)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Differential Output Skew",
          "symbol": "tSKEW",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0.5,
          "max": 1.5,
          "conditions": "RD = 54Ω, CD = 50pF (Figure 4)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Prop Delay Part-to-Part Skew (driver)",
          "symbol": "tSKP-P",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "RD = 54Ω, CD = 50pF (Figure 4, Note 17)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Differential Rise or Fall Time",
          "symbol": "tR, tF",
          "kind": "timing",
          "unit": "ns",
          "min": 2,
          "typ": 5,
          "max": 8,
          "conditions": "RD = 54Ω, CD = 50pF (Figure 4)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Enable to Output High",
          "symbol": "tZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 13,
          "max": 20,
          "conditions": "RL = 110Ω, CL = 50pF, SW = GND (Figure 5, Note 12)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Enable to Output Low",
          "symbol": "tZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 11,
          "max": 20,
          "conditions": "RL = 110Ω, CL = 50pF, SW = VCC (Figure 5, Note 12)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Disable from Output High",
          "symbol": "tHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 14,
          "max": 20,
          "conditions": "RL = 110Ω, CL = 50pF, SW = GND (Figure 5)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Disable from Output Low",
          "symbol": "tLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 12,
          "max": 20,
          "conditions": "RL = 110Ω, CL = 50pF, SW = VCC (Figure 5)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Time to Shutdown (driver)",
          "symbol": "tSHDN",
          "kind": "timing",
          "unit": "ns",
          "min": 60,
          "typ": null,
          "max": 600,
          "conditions": "Note 14",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Enable from Shutdown to Output High",
          "symbol": "tZH(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "RL = 110Ω, CL = 50pF, SW = GND (Figure 5, Notes 14, 15)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver Enable from Shutdown to Output Low",
          "symbol": "tZL(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "RL = 110Ω, CL = 50pF, SW = VCC (Figure 5, Notes 14, 15)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Maximum Data Rate (receiver)",
          "symbol": "fMAX",
          "kind": "timing",
          "unit": "Mbps",
          "min": 40,
          "typ": null,
          "max": null,
          "conditions": "VID = ±1.5V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Input to Output Delay",
          "symbol": "tPLH, tPHL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 9,
          "max": 13,
          "conditions": "Figure 7",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Skew",
          "symbol": "tSKD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0,
          "max": 1.5,
          "conditions": "|tPLH - tPHL| (Figure 7)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Prop Delay Part-to-Part Skew (receiver)",
          "symbol": "tSKP-P",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "Figure 7, Note 17",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver Enable to Output High",
          "symbol": "tZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = GND (Figure 8, Note 13)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver Enable to Output Low",
          "symbol": "tZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = VCC (Figure 8, Note 13)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver Disable from Output High",
          "symbol": "tHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = GND (Figure 8)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver Disable from Output Low",
          "symbol": "tLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = VCC (Figure 8)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Time to Shutdown (receiver)",
          "symbol": "tSHDN",
          "kind": "timing",
          "unit": "ns",
          "min": 60,
          "typ": null,
          "max": 600,
          "conditions": "Note 14",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver Enable from Shutdown to Output High",
          "symbol": "tZH(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = GND (Figure 8, Notes 14, 16)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver Enable from Shutdown to Output Low",
          "symbol": "tZL(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "RL = 1kΩ, CL = 15pF, SW = VCC (Figure 8, Notes 14, 16)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage VCC (recommended operating)",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 4.5,
          "typ": null,
          "max": 5.5,
          "conditions": "VCC = 4.5V to 5.5V (5V ±10%)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature range, ISL3159EF",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "ISL3159EF",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VCC to GND (absolute maximum)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input voltages DI, DE, RE (absolute maximum)",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input/Output voltages A/Y, B/Z (absolute maximum)",
          "symbol": "VI/O",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -9,
          "typ": null,
          "max": 13,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "RO output voltage (absolute maximum)",
          "symbol": "VO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Upper limit printed as VCC + 0.3V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Maximum Junction Temperature (plastic package)",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Maximum Storage Temperature Range",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-ambient, 8 Ld SOIC",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 105,
          "max": null,
          "conditions": "Typical; Notes 5, 7",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-case, 8 Ld SOIC",
          "symbol": "θJC",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 60,
          "max": null,
          "conditions": "Typical; Notes 5, 7",
          "source_page": 4,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "isl3159efbz"
  ],
  "discovery_pitch": "ISL3159EFBZ (RENESAS) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl3159efbz.kicad_sym",
    "isl3159efbz.kicad_mod",
    "isl3159efbz.glb",
    "isl3159efbz.step",
    "isl3159efbz.lbr",
    "docs/hero.png",
    "docs/isl3159efbz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl3159efbz-hero.glb",
    "isl3159efbz-hero.overlay.json",
    "isl3159efbz-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}