main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers isl1208iu8z: viewers · Ray
isl1208iu8z-etched.glb Publish 0.1.0 · Ray
isl1208iu8z-etched.step isl1208iu8z: factory component page (tier=mfr) · Ray
isl1208iu8z-hero.glb isl1208iu8z: hero GLB from the etched model (keeps the MPN mark) · Ray
isl1208iu8z-hero.overlay.json Publish 0.1.0 · Ray
isl1208iu8z.glb Publish 0.1.0 · Ray
isl1208iu8z.kicad_mod Publish 0.1.0 · Ray
isl1208iu8z.kicad_sym Publish 0.1.0 · Ray
isl1208iu8z.lbr Publish 0.1.0 · Ray
isl1208iu8z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

ISL1208IU8Z

RENESAS · Real-time Clocks (RTC) · MSOP-8

ISL1208IU8Z from RENESAS, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input X1 is the input of an inverting amplifier intended to connect to one pin of an external 32.768kHz quartz crystal, and it can also be driven directly from a 32.768kHz source.
2 X2 output X2 is the output of an inverting amplifier intended to connect to the other pin of an external 32.768kHz quartz crystal.
3 VBAT power_in VBAT is the backup supply input that powers the device when VDD fails, with a 1.8 V to 5.5 V battery supply range, and it should be tied to ground if not used.
4 GND power_in GND is the ground reference pin for the device.
5 SDA bidirectional SDA is the open drain serial data pin used to transfer data into and out of the device, requires a pull-up resistor, and may be wire-OR'ed with other open drain or open collector outputs.
6 SCL input SCL is the serial clock input used to clock all serial data into and out of the device.
7 IRQ/FOUT output IRQ/FOUT is an open drain, active low multi-function pin that works as either an interrupt output or a frequency output, selected via the configuration register.
8 VDD power_in VDD is the main power supply pin, specified at 2.7 V to 5.5 V in the DC characteristics, and a 0.1 µF capacitor is recommended from VDD to ground.

Key specifications

Parameter Value
Manufacturer RENESAS
Package MSOP-8
Category Clock and Timing
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Main Power Supply VDD 2.7 5.5 V 3
VBAT Battery Supply Voltage VBAT 1.8 5.5 V 3
RTC operating temperature range -40 85 °C RTC temperature, unless otherwise stated 3
Supply Current IDD1 IDD1 2 6 µA VDD = 5V 3
Supply Current IDD1 IDD1 1.2 4 µA VDD = 3V 3
Supply Current With I2C Active IDD2 40 120 µA VDD = 5V 3
Supply Current (Low Power Mode) IDD3 1.4 5 µA VDD = 5V, LPMODE = 1 3
Battery Supply Current IBAT 400 950 nA VBAT = 3V 3
Input Leakage Current on SCL ILI 100 nA 3
I/O Leakage Current on SDA ILO 100 nA 3
VBAT Mode Threshold VTRIP 1.6 2.2 2.6 V 3
VTRIP Hysteresis VTRIPHYS 10 30 75 mV 3
VBAT Hysteresis VBATHYS 15 50 100 mV 3
IRQ/FOUT Output Low Voltage VOL 0.4 V VDD = 5V, IOL = 3mA 3
SDA and SCL Input Buffer LOW Voltage VIL -0.3 V 4
SDA Output Buffer LOW Voltage VOL 0 0.4 V Sinking 3mA 4
SCL Frequency fSCL 400 kHz 4
Pulse width suppression time at SDA and SCL inputs tIN 50 ns Any pulse narrower than the max spec is suppressed 4
SCL falling edge to SDA output data valid tAA 900 ns SCL falling edge crossing 30% of VDD, until SDA exits the 30% to 70% of VDD window 4
Time the bus must be free before the start of a new transmission tBUF 1300 ns SDA crossing 70% of VDD during a STOP condition, to SDA crossing 70% of VDD during the following START condition 4
Clock LOW time tLOW 1300 ns Measured at the 30% of VDD crossing 4
Clock HIGH time tHIGH 600 ns Measured at the 70% of VDD crossing 4
START condition setup time tSU:STA 600 ns SCL rising edge to SDA falling edge, both crossing 70% of VDD 4
START condition hold time tHD:STA 600 ns From SDA falling edge crossing 30% of VDD to SCL falling edge crossing 70% of VDD 4
Input data setup time tSU:DAT 100 ns From SDA exiting the 30% to 70% of VDD window, to SCL rising edge crossing 30% of VDD 4
Input data hold time tHD:DAT 20 900 ns From SCL falling edge crossing 30% of VDD to SDA entering the 30% to 70% of VDD window 4
STOP condition setup time tSU:STO 600 ns From SCL rising edge crossing 70% of VDD, to SDA rising edge crossing 30% of VDD 4
STOP condition hold time tHD:STO 600 ns From SDA rising edge to SCL falling edge, both crossing 70% of VDD 4
Output data hold time tDH 0 ns From SCL falling edge crossing 30% of VDD, until SDA enters the 30% to 70% of VDD window 4
SDA and SCL rise time tR 300 ns From 30% to 70% of VDD; min is 20 + 0.1 x Cb 4
SDA and SCL fall time tF 300 ns From 70% to 30% of VDD; min is 20 + 0.1 x Cb 4
Capacitive loading of SDA or SCL Cb 10 400 pF Total on-chip and off-chip 4
Voltage on VDD, VBAT, SCL, SDA, and IRQ pins (respect to GND) -0.5 7 V 3
Storage temperature -65 150 °C 3
Thermal resistance junction-to-ambient, MSOP package θJA 145 °C/W MSOP package, notes 5, 7 3
Thermal resistance junction-to-case, MSOP package θJC 55 °C/W MSOP package, notes 6, 7 3

CAD (KiCad official)

  • Symbol: ISL1208IU8Z
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: isl1208iu8z-etched.step / isl1208iu8z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl1208iu8z.step / isl1208iu8z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (24 pp, sha256 bda9903d64f3a077, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF