Generated by kicad-footprint-generator · KiCad file format 20260206
ISL12026IBZ-T
Intersil(Renesas Electronics) · Real-time Clocks (RTC) · SOIC-8
ISL12026IBZ-T from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Input of the inverting oscillator amplifier, intended to connect to one pin of an external 32.768kHz quartz crystal, and it can also be driven directly from a 32.768kHz source. |
| 2 | X2 | output | Output of the inverting oscillator amplifier, intended to connect to the other pin of an external 32.768kHz quartz crystal. |
| 3 | IRQ/FOUT | output | Multi-function interrupt or frequency output pin, selected through the control register, and it is an open-drain output. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line for transferring data into and out of the device, with an open-drain output that may be wire-OR'ed with other open-drain or open-collector outputs. |
| 6 | SCL | input | Serial clock input used to clock all serial data into and out of the device, with an input buffer that is always active (not gated). |
| 7 | VBAT | power_in | Backup supply input that powers the device when VDD fails, with the datasheet specifying VBAT of 1.8 V to 5.5 V and advising to tie it to ground if not used. |
| 8 | VDD | power_in | Main power supply input, with the datasheet specifying VDD of 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-8 |
| Category | Clock and Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Main Power Supply VDD | VDD | 2.7 | 5.5 | V | 3 | ||
| Backup Power Supply VBAT | VBAT | 1.8 | 5.5 | V | 3 | ||
| Operating temperature range (ordering table) | -40 | 85 | °C | Temp range as printed in ordering information | 1 | ||
| Supply Current with I2C Active IDD1 | IDD1 | 500 | µA | VDD = 2.7V | 3 | ||
| Supply Current with I2C Active IDD1 | IDD1 | 800 | µA | VDD = 5.5V | 3 | ||
| Supply Current for Non-Volatile Programming IDD2 | IDD2 | 2.5 | mA | VDD = 2.7V | 3 | ||
| Supply Current for Non-Volatile Programming IDD2 | IDD2 | 3.5 | mA | VDD = 5.5V | 3 | ||
| Supply Current for Main Timekeeping (Low Power Mode) IDD3 | IDD3 | 10 | µA | VDD = VSDA = VSCL = 2.7V | 3 | ||
| Supply Current for Main Timekeeping (Low Power Mode) IDD3 | IDD3 | 20 | µA | VDD = VSDA = VSCL = 5.5V | 3 | ||
| Battery Supply Current IBAT | IBAT | 800 | 1000 | nA | VBAT = 1.8V, VDD = VSDA = VSCL = VRESET = 0 | 3 | |
| Battery Supply Current IBAT | IBAT | 850 | 1200 | nA | VBAT = 3.0V, VDD = VSDA = VSCL = VRESET = 0 | 3 | |
| Battery Input Leakage IBATLKG | IBATLKG | 100 | nA | VDD = 5.5V, VBAT = 1.8V | 3 | ||
| VBAT Mode Threshold VTRIP | VTRIP | 1.8 | 2.2 | 2.6 | V | 3 | |
| VTRIP Hysteresis VTRIPHYS | VTRIPHYS | 30 | mV | 3 | |||
| VBAT Hysteresis VBATHYS | VBATHYS | 50 | mV | 3 | |||
| VDD Negative Slew Rate | VDD SR- | 10 | V/ms | 3 | |||
| IRQ/FOUT Output Low Voltage | VOL | 0.4 | V | VDD = 5V, IOL = 3mA | 3 | ||
| IRQ/FOUT Output Leakage Current | ILO | 100 | 400 | nA | VDD = 5.5V, VOUT = 5.5V | 3 | |
| Voltage on VDD, VBAT, SCL, SDA, IRQ/FOUT pins | -0.3 | 6 | V | With respect to ground | 3 | ||
| Voltage on X1 and X2 pins | -0.3 | 2.5 | V | With respect to ground | 3 | ||
| ESD Rating (MIL-STD-883, Method 3014) | -2 | 2 | kV | Printed as >±2kV | 3 | ||
| ESD Rating (Machine Model) | 175 | V | Printed as >175V | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10s | 3 | |||
| Thermal Resistance θJA, 8 Ld SOIC | θJA | 120 | °C/W | 8 Ld SOIC package, component on high effective thermal conductivity test board | 3 | ||
| VIL SDA and SCL Input Buffer LOW Voltage | VIL | -0.3 | V | Maximum printed as 0.3 x VDD | 4 | ||
| VOL SDA Output Buffer LOW Voltage | VOL | 0 | 0.4 | V | IOL = 4mA | 4 | |
| ILI Input Leakage Current on SCL | ILI | 100 | nA | VIN = 5.5V | 4 | ||
| ILO I/O Leakage Current on SDA | ILO | 100 | nA | VIN = 5.5V | 4 | ||
| EEPROM Endurance | 2e+06 | cycles | Printed as >2,000,000 cycles per byte | 4 | |||
| EEPROM Retention | 50 | Years | Temperature ≤75°C | 4 | |||
| SCL Frequency fSCL | fSCL | 400 | kHz | 4 | |||
| Pulse width Suppression Time at SDA and SCL Inputs tIN | tIN | 50 | ns | Any pulse narrower than the max spec is suppressed | 4 | ||
| SCL Falling Edge to SDA Output Data Valid tAA | tAA | 900 | ns | SCL falling edge crossing 30% of VDD, until SDA exits the 30% to 70% of VDD window | 4 | ||
| Time the Bus Must be Free Before the Start of a New Transmission tBUF | tBUF | 1300 | ns | SDA crossing 70% of VDD during STOP to SDA crossing 70% of VDD during following START | 4 | ||
| Clock LOW Time tLOW | tLOW | 1300 | ns | Measured at the 30% of VDD crossing | 4 | ||
| Clock HIGH Time tHIGH | tHIGH | 600 | ns | Measured at the 70% of VDD crossing | 4 | ||
| START Condition Setup Time tSU:STA | tSU:STA | 600 | ns | SCL rising edge to SDA falling edge, both crossing 70% of VDD | 4 | ||
| START Condition Hold Time tHD:STA | tHD:STA | 600 | ns | From SDA falling edge crossing 30% of VDD to SCL falling edge crossing 70% of VDD | 4 | ||
| Input Data Setup Time tSU:DAT | tSU:DAT | 100 | ns | From SDA exiting the 30% to 70% of VDD window, to SCL rising edge crossing 30% of VDD | 4 | ||
| Input Data Hold Time tHD:DAT | tHD:DAT | 0 | ns | From SCL rising edge crossing 70% of VDD to SDA entering the 30% to 70% of VDD window | 4 | ||
| STOP Condition Setup Time tSU:STO | tSU:STO | 600 | ns | From SCL rising edge crossing 70% of VDD, to SDA rising edge crossing 30% of VDD | 4 |
CAD (KiCad official)
- Symbol:
ISL12026IBZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl12026ibz-t-etched.step/isl12026ibz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl12026ibz-t.step/isl12026ibz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (24 pp, sha256
87807f0dcde4a525, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).