main
Ray
Publish 0.1.0
cbcbc75
ISL12008IB8Z-T
RENESAS · Real-Time Clocks(RTC) · SOIC-8
ISL12008IB8Z-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Input of the on-chip inverting amplifier, intended to connect to one pin of an external 32.768kHz quartz crystal, and it can also be driven directly from a 32.768kHz source. |
| 2 | X2 | output | Output of the on-chip inverting amplifier, intended to connect to the other pin of an external 32.768kHz quartz crystal. |
| 3 | VBAT | power_in | Backup supply input that powers the device in the event that the VDD supply fails; it should be tied to ground if not used. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial data pin used to transfer data into and out of the device, which may be wire-OR'ed with other open-drain or open-collector outputs. |
| 6 | SCL | input | Serial clock input used to clock all serial data into and out of the device. |
| 7 | FT/OUT | output | Open-drain 512Hz frequency output or digital output pin, with the function set via the configuration register, and it requires an external pull-up resistor. |
| 8 | VDD | power_in | Main power supply pin, which operates from 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Clock And Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Main Power Supply | VDD | 2.7 | 5.5 | V | 3 | ||
| VBAT Battery Supply Voltage | VBAT | 1.8 | 5.5 | V | 3 | ||
| Voltage on VDD, VBAT, SCL, SDA, FT/OUT pins | -0.5 | 6.5 | V | Respect to GND | 3 | ||
| Voltage on X1 and X2 pins, VDD mode | -0.5 | V | Respect to GND; max printed as VDD + 0.5 (not converted) | 3 | |||
| Voltage on X1 and X2 pins, VBAT mode | -0.5 | V | Respect to GND; max printed as VBAT + 0.5 (not converted) | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Operating temperature range (RTC) | -40 | 85 | °C | Ordering information temp. range; ISL12008IB8Z-T | 1 | ||
| Supply Current | IDD1 | 2.8 | 6 | µA | VDD = 5V | 3 | |
| Supply Current | IDD1 | 1.6 | 4 | µA | VDD = 3V | 3 | |
| Supply Current With I2C Active | IDD2 | 40 | 120 | µA | VDD = 5V | 3 | |
| Supply Current (Low Power Mode) | IDD3 | 2.3 | 5 | µA | VDD = 5V, LPMODE = 1 | 3 | |
| Battery Supply Current | IBAT | 800 | 950 | nA | VBAT = 3V, +25°C | 3 | |
| Input Leakage Current on SCL | ILI | -1 | 0.1 | 1 | µA | 3 | |
| I/O Leakage Current on SDA | ILO | -1 | 0.1 | 1 | µA | 3 | |
| VBAT Mode Threshold | VTRIP | 2.3 | 2.6 | 2.9 | V | 3 | |
| FT/OUT Output Low Voltage | VOL | 0.02 | 0.4 | V | VDD = 5V, IOL = 3mA | 3 | |
| SDA and SCL Input Buffer LOW Voltage | VIL | -0.3 | V | Max printed as 0.3 x VDD (not converted) | 3 | ||
| SDA Output Buffer LOW Voltage, Sinking | VOL | 0 | 0.02 | 0.4 | V | Sinking 3mA | 3 |
| Pulse width Suppression Time at SDA and SCL Inputs | tIN | 50 | ns | Any pulse narrower than the max spec is suppressed | 4 | ||
| Input Data Hold Time | tHD:DAT | 20 | 900 | ns | From SCL falling edge crossing 30% of VDD to SDA entering 30% to 70% of VDD window | 4 | |
| SDA and SCL Rise Time | tR | 300 | ns | From 30% to 70% of VDD; min printed as 20 + 0.1 x Cb (not converted) | 4 | ||
| SDA and SCL Fall Time | tF | 300 | ns | From 70% to 30% of VDD; min printed as 20 + 0.1 x Cb (not converted) | 4 | ||
| Capacitive Loading of SDA or SCL | Cb | 10 | 400 | pF | Total on-chip and off-chip | 4 | |
| SDA and SCL Bus Pull-Up Resistor | Rpu | 1 | k | Off-chip; maximum set by tR and tF (about 2k to 2.5k at Cb = 400pF) | 4 | ||
| VTRIP Hysteresis | VTRIPHYS | 36 | mV | Note 6 (limits typical, not production tested) | 3 | ||
| VBAT Hysteresis | VBATHYS | 53 | mV | Note 6 (limits typical, not production tested) | 3 | ||
| VDD Negative Slewrate | VDD SR- | 5 | V/ms | Note 4: required to ensure proper timekeeping | 3 | ||
| SDA and SCL Pin Capacitance | Cpin | 10 | pF | TA = +25°C, f = 1MHz, VDD = 5V, VIN = 0V, VOUT = 0V | 3 | ||
| SCL Frequency | fSCL | 400 | kHz | 4 | |||
| Time the Bus Must be Free Before the Start of a New Transmission | tBUF | 1300 | ns | SDA crossing 70% of VDD during STOP to following START | 4 | ||
| Clock LOW Time | tLOW | 1300 | ns | Measured at 30% of VDD crossing | 4 | ||
| Clock HIGH Time | tHIGH | 600 | ns | Measured at 70% of VDD crossing | 4 | ||
| START Condition Setup Time | tSU:STA | 600 | ns | SCL rising edge to SDA falling edge, both crossing 70% of VDD | 4 | ||
| START Condition Hold Time | tHD:STA | 600 | ns | From SDA falling edge crossing 30% of VDD to SCL falling edge crossing 70% of VDD | 4 | ||
| Input Data Setup Time | tSU:DAT | 100 | ns | From SDA exiting 30% to 70% of VDD window to SCL rising edge crossing 30% of VDD | 4 | ||
| STOP Condition Setup Time | tSU:STO | 600 | ns | From SCL rising edge crossing 70% of VDD to SDA rising edge crossing 30% of VDD | 4 | ||
| STOP Condition Hold Time | tHD:STO | 600 | ns | From SDA rising edge to SCL falling edge, both crossing 70% of VDD | 4 | ||
| Output Data Hold Time | tDH | 0 | ns | From SCL falling edge crossing 30% of VDD until SDA enters 30% to 70% of VDD window | 4 | ||
| Thermal Resistance, 8 Lead SOIC | JA | 115 | °C/W | Typical; measured on high effective thermal conductivity test board in free air | 3 |
CAD (KiCad official)
- Symbol:
ISL12008IB8Z-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl12008ib8z-t-etched.step/isl12008ib8z-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl12008ib8z-t.step/isl12008ib8z-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (19 pp, sha256
fec87c1147703894, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL12008IB8Z-T
**RENESAS** · Real-Time Clocks(RTC) · SOIC-8
ISL12008IB8Z-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Input of the on-chip inverting amplifier, intended to connect to one pin of an external 32.768kHz quartz crystal, and it can also be driven directly from a 32.768kHz source. |
| 2 | X2 | output | Output of the on-chip inverting amplifier, intended to connect to the other pin of an external 32.768kHz quartz crystal. |
| 3 | VBAT | power_in | Backup supply input that powers the device in the event that the VDD supply fails; it should be tied to ground if not used. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial data pin used to transfer data into and out of the device, which may be wire-OR'ed with other open-drain or open-collector outputs. |
| 6 | SCL | input | Serial clock input used to clock all serial data into and out of the device. |
| 7 | FT/OUT | output | Open-drain 512Hz frequency output or digital output pin, with the function set via the configuration register, and it requires an external pull-up resistor. |
| 8 | VDD | power_in | Main power supply pin, which operates from 2.7V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Clock And Timing |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Main Power Supply | VDD | 2.7 | | 5.5 | V | | 3 |
| VBAT Battery Supply Voltage | VBAT | 1.8 | | 5.5 | V | | 3 |
| Voltage on VDD, VBAT, SCL, SDA, FT/OUT pins | | -0.5 | | 6.5 | V | Respect to GND | 3 |
| Voltage on X1 and X2 pins, VDD mode | | -0.5 | | | V | Respect to GND; max printed as VDD + 0.5 (not converted) | 3 |
| Voltage on X1 and X2 pins, VBAT mode | | -0.5 | | | V | Respect to GND; max printed as VBAT + 0.5 (not converted) | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Operating temperature range (RTC) | | -40 | | 85 | °C | Ordering information temp. range; ISL12008IB8Z-T | 1 |
| Supply Current | IDD1 | | 2.8 | 6 | µA | VDD = 5V | 3 |
| Supply Current | IDD1 | | 1.6 | 4 | µA | VDD = 3V | 3 |
| Supply Current With I2C Active | IDD2 | | 40 | 120 | µA | VDD = 5V | 3 |
| Supply Current (Low Power Mode) | IDD3 | | 2.3 | 5 | µA | VDD = 5V, LPMODE = 1 | 3 |
| Battery Supply Current | IBAT | | 800 | 950 | nA | VBAT = 3V, +25°C | 3 |
| Input Leakage Current on SCL | ILI | -1 | 0.1 | 1 | µA | | 3 |
| I/O Leakage Current on SDA | ILO | -1 | 0.1 | 1 | µA | | 3 |
| VBAT Mode Threshold | VTRIP | 2.3 | 2.6 | 2.9 | V | | 3 |
| FT/OUT Output Low Voltage | VOL | | 0.02 | 0.4 | V | VDD = 5V, IOL = 3mA | 3 |
| SDA and SCL Input Buffer LOW Voltage | VIL | -0.3 | | | V | Max printed as 0.3 x VDD (not converted) | 3 |
| SDA Output Buffer LOW Voltage, Sinking | VOL | 0 | 0.02 | 0.4 | V | Sinking 3mA | 3 |
| Pulse width Suppression Time at SDA and SCL Inputs | tIN | | | 50 | ns | Any pulse narrower than the max spec is suppressed | 4 |
| Input Data Hold Time | tHD:DAT | 20 | | 900 | ns | From SCL falling edge crossing 30% of VDD to SDA entering 30% to 70% of VDD window | 4 |
| SDA and SCL Rise Time | tR | | | 300 | ns | From 30% to 70% of VDD; min printed as 20 + 0.1 x Cb (not converted) | 4 |
| SDA and SCL Fall Time | tF | | | 300 | ns | From 70% to 30% of VDD; min printed as 20 + 0.1 x Cb (not converted) | 4 |
| Capacitive Loading of SDA or SCL | Cb | 10 | | 400 | pF | Total on-chip and off-chip | 4 |
| SDA and SCL Bus Pull-Up Resistor | Rpu | 1 | | | k | Off-chip; maximum set by tR and tF (about 2k to 2.5k at Cb = 400pF) | 4 |
| VTRIP Hysteresis | VTRIPHYS | | 36 | | mV | Note 6 (limits typical, not production tested) | 3 |
| VBAT Hysteresis | VBATHYS | | 53 | | mV | Note 6 (limits typical, not production tested) | 3 |
| VDD Negative Slewrate | VDD SR- | | 5 | | V/ms | Note 4: required to ensure proper timekeeping | 3 |
| SDA and SCL Pin Capacitance | Cpin | | 10 | | pF | TA = +25°C, f = 1MHz, VDD = 5V, VIN = 0V, VOUT = 0V | 3 |
| SCL Frequency | fSCL | | 400 | | kHz | | 4 |
| Time the Bus Must be Free Before the Start of a New Transmission | tBUF | | 1300 | | ns | SDA crossing 70% of VDD during STOP to following START | 4 |
| Clock LOW Time | tLOW | | 1300 | | ns | Measured at 30% of VDD crossing | 4 |
| Clock HIGH Time | tHIGH | | 600 | | ns | Measured at 70% of VDD crossing | 4 |
| START Condition Setup Time | tSU:STA | | 600 | | ns | SCL rising edge to SDA falling edge, both crossing 70% of VDD | 4 |
| START Condition Hold Time | tHD:STA | | 600 | | ns | From SDA falling edge crossing 30% of VDD to SCL falling edge crossing 70% of VDD | 4 |
| Input Data Setup Time | tSU:DAT | | 100 | | ns | From SDA exiting 30% to 70% of VDD window to SCL rising edge crossing 30% of VDD | 4 |
| STOP Condition Setup Time | tSU:STO | | 600 | | ns | From SCL rising edge crossing 70% of VDD to SDA rising edge crossing 30% of VDD | 4 |
| STOP Condition Hold Time | tHD:STO | | 600 | | ns | From SDA rising edge to SCL falling edge, both crossing 70% of VDD | 4 |
| Output Data Hold Time | tDH | | 0 | | ns | From SCL falling edge crossing 30% of VDD until SDA enters 30% to 70% of VDD window | 4 |
| Thermal Resistance, 8 Lead SOIC | JA | | 115 | | °C/W | Typical; measured on high effective thermal conductivity test board in free air | 3 |
## CAD (KiCad official)
- Symbol: `ISL12008IB8Z-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `isl12008ib8z-t-etched.step` / `isl12008ib8z-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl12008ib8z-t.step` / `isl12008ib8z-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/isl12008ib8z-t-datasheet.pdf) (19 pp, sha256 `fec87c1147703894`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl12008ib8z-t-datasheet.pdf)