main
Ray
Publish 0.1.0
457a06c
IS62WVS5128FBLL-20NLI
ISSI(Integrated Silicon Solution) · SRAM · SOIC-8
IS62WVS5128FBLL-20NLI from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | A low level selects the device and a high level deselects it and forces it into Standby mode, with SO going high-impedance when deselected. |
| 2 | SO/SIO1 | bidirectional | Serial data output in SPI mode, shifted out after the falling edge of SCK; it serves as SIO1 in SDI and SQI modes. |
| 3 | DNU/SIO2 | unconnected | Do Not Use in SPI and SDI modes; it is SIO2 (a data I/O) in SQI mode. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial data input in SPI mode, latched on the rising edge of SCK; it serves as SIO0 in SDI and SQI modes. |
| 6 | SCK | input | Serial clock that synchronizes communication, with SI latched on the rising edge and SO updated after the falling edge; the -20 grade is rated for a 20 MHz clock. |
| 7 | HOLD#/SIO3 | bidirectional | Pulling HOLD# low while SCK is low suspends serial communication without resetting the sequence; the HOLD function is not available in Quad SPI mode, where this pin is SIO3. |
| 8 | VDD | power_in | Power supply; the IS62WVS5128FBLL operating range is 2.2V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output HIGH Voltage | VOH | 2 | V | 2.2 ≤ VDD < 2.7, IOH = -0.1 mA | 18 | ||
| Output HIGH Voltage | VOH | 2.4 | V | 2.7 ≤ VDD ≤ 3.6, IOH = -1.0 mA | 18 | ||
| Output LOW Voltage | VOL | 0.4 | V | 2.2 ≤ VDD < 2.7, IOL = 0.1 mA | 18 | ||
| Input HIGH Voltage | VIH | 1.8 | V | 2.2 ≤ VDD < 2.7 | 18 | ||
| Input HIGH Voltage | VIH | 2.2 | V | 2.7 ≤ VDD ≤ 3.6 | 18 | ||
| Input LOW Voltage | VIL | -0.3 | 0.6 | V | 2.2 ≤ VDD < 2.7 | 18 | |
| Input LOW Voltage | VIL | -0.3 | 0.8 | V | 2.7 ≤ VDD ≤ 3.6 | 18 | |
| Input Leakage | ILI | -1 | 1 | µA | GND < VIN < VDD | 18 | |
| Output Leakage | ILO | -1 | 1 | µA | GND < VIN < VDD, Output Disabled | 18 | |
| VDD Dynamic Operating Supply Current (Industrial) | ICC | 16 | mA | VDD = Max, f = fMAX, CS# = VIL, IOUT = 0 mA | 19 | ||
| CMOS Standby Current (CMOS Inputs, Industrial) | ISB2 | 40 | µA | VDD = Max, f = 0, CS# ≥ VDD - 0.2V, VIN ≤ 0.2V or VIN ≥ VDD - 0.2V | 19 | ||
| Clock Frequency | FCLK | 20 | MHz | 20 | |||
| CS# Setup Time | tCSS | 25 | ns | 20 | |||
| CS# Hold Time | tCSH | 50 | ns | 20 | |||
| CS# Disable Time | tCSD | 25 | ns | 20 | |||
| Data Setup Time | tDS | 10 | ns | 20 | |||
| Data Hold Time | tDH | 10 | ns | 20 | |||
| Clock High Time | tCKH | 23 | ns | 20 | |||
| Clock Low Time | tCKL | 23 | ns | 20 | |||
| Clock Delay Time | tCLD | 25 | ns | 20 | |||
| Output Valid from Clock Low | tV | 25 | ns | 20 | |||
| Output Hold Time | tOH | 0 | ns | 20 | |||
| CS# High to Output High-Z | tCHZ | 20 | ns | 20 | |||
| HOLD# Setup Time | tHS | 10 | ns | 20 | |||
| HOLD# Hold Time | tHH | 10 | ns | 20 | |||
| HOLD# Low to Output High-Z | tHZ | 20 | ns | 20 | |||
| HOLD# High to Output Valid | tHV | 50 | ns | 20 | |||
| Supply Voltage VDD (Industrial, IS62WVS5128FBLL) | VDD | 2.2 | 3.6 | V | Industrial range, device marking IS62WVS5128FBLL | 16 | |
| Ambient Temperature (Industrial) | TA | -40 | 85 | C | Industrial range, device marking IS62WVS5128FBLL | 16 | |
| Terminal Voltage with Respect to GND (max printed as +3.9(VDD+0.3V)) | Vterm | -0.2 | V | 16 | |||
| VDD Related to GND (max printed as +3.9(VDD+0.3V)) | VDD | -0.2 | V | 16 | |||
| Temperature Under Bias | tBIAS | -55 | 125 | C | 16 | ||
| Storage Temperature | tStg | -65 | 150 | C | 16 | ||
| Input Capacitance (CS#, SCK) | CIN | 12 | pF | TA = 25°C, f = 1 MHz, VDD = VDD(typ) | 16 | ||
| Input/Output Capacitance (other pins) | CI/O | 16 | pF | TA = 25°C, f = 1 MHz, VDD = VDD(typ) | 16 |
CAD (KiCad official)
- Symbol:
IS62WVS5128FBLL-20NLI - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
is62wvs5128fbll-20nli-etched.step/is62wvs5128fbll-20nli-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is62wvs5128fbll-20nli.step/is62wvs5128fbll-20nli.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (24 pp, sha256
ee6745754d93b355, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# IS62WVS5128FBLL-20NLI
**ISSI(Integrated Silicon Solution)** · SRAM · SOIC-8
IS62WVS5128FBLL-20NLI from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | A low level selects the device and a high level deselects it and forces it into Standby mode, with SO going high-impedance when deselected. |
| 2 | SO/SIO1 | bidirectional | Serial data output in SPI mode, shifted out after the falling edge of SCK; it serves as SIO1 in SDI and SQI modes. |
| 3 | DNU/SIO2 | unconnected | Do Not Use in SPI and SDI modes; it is SIO2 (a data I/O) in SQI mode. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial data input in SPI mode, latched on the rising edge of SCK; it serves as SIO0 in SDI and SQI modes. |
| 6 | SCK | input | Serial clock that synchronizes communication, with SI latched on the rising edge and SO updated after the falling edge; the -20 grade is rated for a 20 MHz clock. |
| 7 | HOLD#/SIO3 | bidirectional | Pulling HOLD# low while SCK is low suspends serial communication without resetting the sequence; the HOLD function is not available in Quad SPI mode, where this pin is SIO3. |
| 8 | VDD | power_in | Power supply; the IS62WVS5128FBLL operating range is 2.2V to 3.6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output HIGH Voltage | VOH | 2 | | | V | 2.2 ≤ VDD < 2.7, IOH = -0.1 mA | 18 |
| Output HIGH Voltage | VOH | 2.4 | | | V | 2.7 ≤ VDD ≤ 3.6, IOH = -1.0 mA | 18 |
| Output LOW Voltage | VOL | | | 0.4 | V | 2.2 ≤ VDD < 2.7, IOL = 0.1 mA | 18 |
| Input HIGH Voltage | VIH | 1.8 | | | V | 2.2 ≤ VDD < 2.7 | 18 |
| Input HIGH Voltage | VIH | 2.2 | | | V | 2.7 ≤ VDD ≤ 3.6 | 18 |
| Input LOW Voltage | VIL | -0.3 | | 0.6 | V | 2.2 ≤ VDD < 2.7 | 18 |
| Input LOW Voltage | VIL | -0.3 | | 0.8 | V | 2.7 ≤ VDD ≤ 3.6 | 18 |
| Input Leakage | ILI | -1 | | 1 | µA | GND < VIN < VDD | 18 |
| Output Leakage | ILO | -1 | | 1 | µA | GND < VIN < VDD, Output Disabled | 18 |
| VDD Dynamic Operating Supply Current (Industrial) | ICC | | | 16 | mA | VDD = Max, f = fMAX, CS# = VIL, IOUT = 0 mA | 19 |
| CMOS Standby Current (CMOS Inputs, Industrial) | ISB2 | | | 40 | µA | VDD = Max, f = 0, CS# ≥ VDD - 0.2V, VIN ≤ 0.2V or VIN ≥ VDD - 0.2V | 19 |
| Clock Frequency | FCLK | | | 20 | MHz | | 20 |
| CS# Setup Time | tCSS | 25 | | | ns | | 20 |
| CS# Hold Time | tCSH | 50 | | | ns | | 20 |
| CS# Disable Time | tCSD | 25 | | | ns | | 20 |
| Data Setup Time | tDS | 10 | | | ns | | 20 |
| Data Hold Time | tDH | 10 | | | ns | | 20 |
| Clock High Time | tCKH | 23 | | | ns | | 20 |
| Clock Low Time | tCKL | 23 | | | ns | | 20 |
| Clock Delay Time | tCLD | 25 | | | ns | | 20 |
| Output Valid from Clock Low | tV | | | 25 | ns | | 20 |
| Output Hold Time | tOH | 0 | | | ns | | 20 |
| CS# High to Output High-Z | tCHZ | | | 20 | ns | | 20 |
| HOLD# Setup Time | tHS | 10 | | | ns | | 20 |
| HOLD# Hold Time | tHH | 10 | | | ns | | 20 |
| HOLD# Low to Output High-Z | tHZ | | | 20 | ns | | 20 |
| HOLD# High to Output Valid | tHV | | | 50 | ns | | 20 |
| Supply Voltage VDD (Industrial, IS62WVS5128FBLL) | VDD | 2.2 | | 3.6 | V | Industrial range, device marking IS62WVS5128FBLL | 16 |
| Ambient Temperature (Industrial) | TA | -40 | | 85 | C | Industrial range, device marking IS62WVS5128FBLL | 16 |
| Terminal Voltage with Respect to GND (max printed as +3.9(VDD+0.3V)) | Vterm | -0.2 | | | V | | 16 |
| VDD Related to GND (max printed as +3.9(VDD+0.3V)) | VDD | -0.2 | | | V | | 16 |
| Temperature Under Bias | tBIAS | -55 | | 125 | C | | 16 |
| Storage Temperature | tStg | -65 | | 150 | C | | 16 |
| Input Capacitance (CS#, SCK) | CIN | | | 12 | pF | TA = 25°C, f = 1 MHz, VDD = VDD(typ) | 16 |
| Input/Output Capacitance (other pins) | CI/O | | | 16 | pF | TA = 25°C, f = 1 MHz, VDD = VDD(typ) | 16 |
## CAD (KiCad official)
- Symbol: `IS62WVS5128FBLL-20NLI`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `is62wvs5128fbll-20nli-etched.step` / `is62wvs5128fbll-20nli-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `is62wvs5128fbll-20nli.step` / `is62wvs5128fbll-20nli.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ISSI(Integrated Silicon Solution) datasheet](docs/is62wvs5128fbll-20nli-datasheet.pdf) (24 pp, sha256 `ee6745754d93b355`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/is62wvs5128fbll-20nli-datasheet.pdf)