main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is62wvs5128fbll-20nli: viewers · Ray
is62wvs5128fbll-20nli-etched.glb Publish 0.1.0 · Ray
is62wvs5128fbll-20nli-etched.step is62wvs5128fbll-20nli: factory component page (tier=lcsc) · Ray
is62wvs5128fbll-20nli-hero.glb is62wvs5128fbll-20nli: hero GLB from the etched model (keeps the MPN mark) · Ray
is62wvs5128fbll-20nli-hero.overlay.json Publish 0.1.0 · Ray
is62wvs5128fbll-20nli.glb Publish 0.1.0 · Ray
is62wvs5128fbll-20nli.kicad_mod Publish 0.1.0 · Ray
is62wvs5128fbll-20nli.kicad_sym Publish 0.1.0 · Ray
is62wvs5128fbll-20nli.lbr Publish 0.1.0 · Ray
is62wvs5128fbll-20nli.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

IS62WVS5128FBLL-20NLI

ISSI(Integrated Silicon Solution) · SRAM · SOIC-8

IS62WVS5128FBLL-20NLI from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input A low level selects the device and a high level deselects it and forces it into Standby mode, with SO going high-impedance when deselected.
2 SO/SIO1 bidirectional Serial data output in SPI mode, shifted out after the falling edge of SCK; it serves as SIO1 in SDI and SQI modes.
3 DNU/SIO2 unconnected Do Not Use in SPI and SDI modes; it is SIO2 (a data I/O) in SQI mode.
4 VSS power_in Ground reference for the device.
5 SI/SIO0 bidirectional Serial data input in SPI mode, latched on the rising edge of SCK; it serves as SIO0 in SDI and SQI modes.
6 SCK input Serial clock that synchronizes communication, with SI latched on the rising edge and SO updated after the falling edge; the -20 grade is rated for a 20 MHz clock.
7 HOLD#/SIO3 bidirectional Pulling HOLD# low while SCK is low suspends serial communication without resetting the sequence; the HOLD function is not available in Quad SPI mode, where this pin is SIO3.
8 VDD power_in Power supply; the IS62WVS5128FBLL operating range is 2.2V to 3.6V.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output HIGH Voltage VOH 2 V 2.2 ≤ VDD < 2.7, IOH = -0.1 mA 18
Output HIGH Voltage VOH 2.4 V 2.7 ≤ VDD ≤ 3.6, IOH = -1.0 mA 18
Output LOW Voltage VOL 0.4 V 2.2 ≤ VDD < 2.7, IOL = 0.1 mA 18
Input HIGH Voltage VIH 1.8 V 2.2 ≤ VDD < 2.7 18
Input HIGH Voltage VIH 2.2 V 2.7 ≤ VDD ≤ 3.6 18
Input LOW Voltage VIL -0.3 0.6 V 2.2 ≤ VDD < 2.7 18
Input LOW Voltage VIL -0.3 0.8 V 2.7 ≤ VDD ≤ 3.6 18
Input Leakage ILI -1 1 µA GND < VIN < VDD 18
Output Leakage ILO -1 1 µA GND < VIN < VDD, Output Disabled 18
VDD Dynamic Operating Supply Current (Industrial) ICC 16 mA VDD = Max, f = fMAX, CS# = VIL, IOUT = 0 mA 19
CMOS Standby Current (CMOS Inputs, Industrial) ISB2 40 µA VDD = Max, f = 0, CS# ≥ VDD - 0.2V, VIN ≤ 0.2V or VIN ≥ VDD - 0.2V 19
Clock Frequency FCLK 20 MHz 20
CS# Setup Time tCSS 25 ns 20
CS# Hold Time tCSH 50 ns 20
CS# Disable Time tCSD 25 ns 20
Data Setup Time tDS 10 ns 20
Data Hold Time tDH 10 ns 20
Clock High Time tCKH 23 ns 20
Clock Low Time tCKL 23 ns 20
Clock Delay Time tCLD 25 ns 20
Output Valid from Clock Low tV 25 ns 20
Output Hold Time tOH 0 ns 20
CS# High to Output High-Z tCHZ 20 ns 20
HOLD# Setup Time tHS 10 ns 20
HOLD# Hold Time tHH 10 ns 20
HOLD# Low to Output High-Z tHZ 20 ns 20
HOLD# High to Output Valid tHV 50 ns 20
Supply Voltage VDD (Industrial, IS62WVS5128FBLL) VDD 2.2 3.6 V Industrial range, device marking IS62WVS5128FBLL 16
Ambient Temperature (Industrial) TA -40 85 C Industrial range, device marking IS62WVS5128FBLL 16
Terminal Voltage with Respect to GND (max printed as +3.9(VDD+0.3V)) Vterm -0.2 V 16
VDD Related to GND (max printed as +3.9(VDD+0.3V)) VDD -0.2 V 16
Temperature Under Bias tBIAS -55 125 C 16
Storage Temperature tStg -65 150 C 16
Input Capacitance (CS#, SCK) CIN 12 pF TA = 25°C, f = 1 MHz, VDD = VDD(typ) 16
Input/Output Capacitance (other pins) CI/O 16 pF TA = 25°C, f = 1 MHz, VDD = VDD(typ) 16

CAD (KiCad official)

  • Symbol: IS62WVS5128FBLL-20NLI
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: is62wvs5128fbll-20nli-etched.step / is62wvs5128fbll-20nli-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is62wvs5128fbll-20nli.step / is62wvs5128fbll-20nli.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (24 pp, sha256 ee6745754d93b355, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF