main
Ray Publish 0.1.0 80e95a9

IS61WV25616BLL-10BLI

ISSI(Integrated Silicon Solution) · SRAM · TFBGA-48

IS61WV25616BLL-10BLI from ISSI(Integrated Silicon Solution), in a TFBGA-48. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
A1 LB input Lower-byte control input that enables access to I/O0-I/O7.
A2 OE input Output Enable input that controls the data outputs during reads.
A3 A0 input Address input A0 of the A0-A17 address bus.
A4 A1 input Address input A1 of the A0-A17 address bus.
A5 A2 input Address input A2 of the A0-A17 address bus.
A6 NC unconnected No connection.
B1 I/O8 bidirectional Data input/output 8, part of the upper byte (I/O8-I/O15) controlled by UB.
B2 UB input Upper-byte control input that enables access to I/O8-I/O15.
B3 A3 input Address input A3 of the A0-A17 address bus.
B4 A4 input Address input A4 of the A0-A17 address bus.
B5 CE input Chip Enable input; when HIGH the device is deselected and enters standby mode.
B6 I/O0 bidirectional Data input/output 0, part of the lower byte (I/O0-I/O7) controlled by LB.
C1 I/O9 bidirectional Data input/output 9, part of the upper byte controlled by UB.
C2 I/O10 bidirectional Data input/output 10, part of the upper byte controlled by UB.
C3 A5 input Address input A5 of the A0-A17 address bus.
C4 A6 input Address input A6 of the A0-A17 address bus.
C5 I/O1 bidirectional Data input/output 1, part of the lower byte controlled by LB.
C6 I/O2 bidirectional Data input/output 2, part of the lower byte controlled by LB.
D1 GND power_in Ground.
D2 I/O11 bidirectional Data input/output 11, part of the upper byte controlled by UB.
D3 A17 input Address input A17 of the A0-A17 address bus.
D4 A7 input Address input A7 of the A0-A17 address bus.
D5 I/O3 bidirectional Data input/output 3, part of the lower byte controlled by LB.
D6 VDD power_in Power supply, 2.4V to 3.6V for IS61WV25616BLL.
E1 VDD power_in Power supply, 2.4V to 3.6V for IS61WV25616BLL.
E2 I/O12 bidirectional Data input/output 12, part of the upper byte controlled by UB.
E3 NC unconnected No connection.
E4 A16 input Address input A16 of the A0-A17 address bus.
E5 I/O4 bidirectional Data input/output 4, part of the lower byte controlled by LB.
E6 GND power_in Ground.
F1 I/O14 bidirectional Data input/output 14, part of the upper byte controlled by UB.
F2 I/O13 bidirectional Data input/output 13, part of the upper byte controlled by UB.
F3 A14 input Address input A14 of the A0-A17 address bus.
F4 A15 input Address input A15 of the A0-A17 address bus.
F5 I/O5 bidirectional Data input/output 5, part of the lower byte controlled by LB.
F6 I/O6 bidirectional Data input/output 6, part of the lower byte controlled by LB.
G1 I/O15 bidirectional Data input/output 15, part of the upper byte controlled by UB.
G2 NC unconnected No connection.
G3 A12 input Address input A12 of the A0-A17 address bus.
G4 A13 input Address input A13 of the A0-A17 address bus.
G5 WE input Active-LOW Write Enable input that controls both writing and reading of the memory.
G6 I/O7 bidirectional Data input/output 7, part of the lower byte controlled by LB.
H1 NC unconnected No connection.
H2 A8 input Address input A8 of the A0-A17 address bus.
H3 A9 input Address input A9 of the A0-A17 address bus.
H4 A10 input Address input A10 of the A0-A17 address bus.
H5 A11 input Address input A11 of the A0-A17 address bus.
H6 NC unconnected No connection.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package TFBGA-48
Category Memory
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output HIGH Voltage VOH 1.8 V VDD = Min., IOH = -1.0 mA 4
Output LOW Voltage VOL 0.4 V VDD = Min., IOL = 1.0 mA 4
Input HIGH Voltage VIH 2 V VDD = 2.4V-3.6V; max VDD + 0.3 4
Input LOW Voltage VIL -0.3 0.8 V VDD = 2.4V-3.6V 4
Input Leakage ILI -1 1 µA GND ≤ VIN ≤ VDD 4
Output Leakage ILO -1 1 µA GND ≤ VOUT ≤ VDD, Outputs Disabled 4
VDD Dynamic Operating Supply Current ICC 25 45 mA VDD = Max., IOUT = 0 mA, f = fMAX, Ind. 7
Operating Supply Current ICC1 40 mA VDD = Max., IOUT = 0 mA, f = 0, Ind. 7
TTL Standby Current ISB1 15 mA VDD = Max., VIN = VIH or VIL, CE ≥ VIH, f = 0, Ind. 7
CMOS Standby Current ISB2 2 9 mA VDD = Max., CE ≥ VDD, 0.2V, VIN ≥ VDD, 0.2V or VIN ≤ 0.2V, f = 0, Ind. 7
Terminal Voltage with Respect to GND VTERM -0.5 V -0.5 to VDD + 0.5 6
VDD Relates to GND VDD -0.3 4 V -0.3 to 4.0 6
Storage Temperature TSTG -65 150 °C -65 to +150 6
Power Dissipation PT 1 W 6
Input Capacitance CIN 6 pF VIN = 0V, TA = 25°C, f = 1 MHz, VDD = 3.3V 6
Input/Output Capacitance CI/O 8 pF VOUT = 0V, TA = 25°C, f = 1 MHz, VDD = 3.3V 6
Supply Voltage (10 ns) VDD 2.4 3.6 V Industrial, 10 ns 7
Ambient Temperature, Industrial TA -40 85 °C Industrial 7
VDD for Data Retention VDR 2 3.6 V See Data Retention Waveform 16
Data Retention Current IDR 9 mA VDD = 2.0V, CE ≥ VDD, 0.2V, Ind. 16
Data Retention Setup Time tSDR 0 ns See Data Retention Waveform 16
Read Cycle Time tRC 10 ns -10 9
Address Access Time tAA 10 ns -10 9
Output Hold Time tOHA 2 ns -10 9
CE Access Time tACE 10 ns -10 9
OE Access Time tDOE 4.5 ns -10 9
OE to High-Z Output tHZOE 4 ns -10 9
OE to Low-Z Output tLZOE 0 ns -10 9
CE to High-Z Output tHZCE 0 4 ns -10 9
CE to Low-Z Output tLZCE 3 ns -10 9
LB, UB Access Time tBA 6.5 ns -10 9
LB, UB to High-Z Output tHZB 0 3 ns -10 9
LB, UB to Low-Z Output tLZB 0 ns -10 9
Power Up Time tPU 0 ns -10 9
Power Down Time tPD 10 ns -10 9
Write Cycle Time tWC 10 ns -10 12
CE to Write End tSCE 8 ns -10 12
Address Setup Time to Write End tAW 8 ns -10 12
Address Hold from Write End tHA 0 ns -10 12
Address Setup Time tSA 0 ns -10 12
LB, UB Valid to End of Write tPWB 8 ns -10 12
WE Pulse Width tPWE1 8 ns -10 12
WE Pulse Width (OE = LOW) tPWE2 10 ns -10 12
Data Setup to Write End tSD 6 ns -10 12
Data Hold from Write End tHD 0 ns -10 12
WE LOW to High-Z Output tHZWE 5 ns -10 12
WE HIGH to Low-Z Output tLZWE 2 ns -10 12

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper IS64WV25616BLL-10BLA3 48 mini BGA (6mm x 8mm), Lead-free IS64WV25616BLL-10CTA3 TSOP (Type II), Copper Leadframe 18

CAD (KiCad official)

  • Symbol: IS61WV25616BLL-10BLI
  • Footprint: Package_BGA:TFBGA-48_6x10mm_Layout6x8_P0.75mm
  • 3D model: TFBGA-48, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal BGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: is61wv25616bll-10bli-etched.step / is61wv25616bll-10bli-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is61wv25616bll-10bli.step / is61wv25616bll-10bli.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (21 pp, sha256 72cbb9206f27ca2b, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF