3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownIS61WV25616BLL-10BLI
ISSI(Integrated Silicon Solution) · SRAM · TFBGA-48
IS61WV25616BLL-10BLI from ISSI(Integrated Silicon Solution), in a TFBGA-48. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | LB | input | Lower-byte control input that enables access to I/O0-I/O7. |
| A2 | OE | input | Output Enable input that controls the data outputs during reads. |
| A3 | A0 | input | Address input A0 of the A0-A17 address bus. |
| A4 | A1 | input | Address input A1 of the A0-A17 address bus. |
| A5 | A2 | input | Address input A2 of the A0-A17 address bus. |
| A6 | NC | unconnected | No connection. |
| B1 | I/O8 | bidirectional | Data input/output 8, part of the upper byte (I/O8-I/O15) controlled by UB. |
| B2 | UB | input | Upper-byte control input that enables access to I/O8-I/O15. |
| B3 | A3 | input | Address input A3 of the A0-A17 address bus. |
| B4 | A4 | input | Address input A4 of the A0-A17 address bus. |
| B5 | CE | input | Chip Enable input; when HIGH the device is deselected and enters standby mode. |
| B6 | I/O0 | bidirectional | Data input/output 0, part of the lower byte (I/O0-I/O7) controlled by LB. |
| C1 | I/O9 | bidirectional | Data input/output 9, part of the upper byte controlled by UB. |
| C2 | I/O10 | bidirectional | Data input/output 10, part of the upper byte controlled by UB. |
| C3 | A5 | input | Address input A5 of the A0-A17 address bus. |
| C4 | A6 | input | Address input A6 of the A0-A17 address bus. |
| C5 | I/O1 | bidirectional | Data input/output 1, part of the lower byte controlled by LB. |
| C6 | I/O2 | bidirectional | Data input/output 2, part of the lower byte controlled by LB. |
| D1 | GND | power_in | Ground. |
| D2 | I/O11 | bidirectional | Data input/output 11, part of the upper byte controlled by UB. |
| D3 | A17 | input | Address input A17 of the A0-A17 address bus. |
| D4 | A7 | input | Address input A7 of the A0-A17 address bus. |
| D5 | I/O3 | bidirectional | Data input/output 3, part of the lower byte controlled by LB. |
| D6 | VDD | power_in | Power supply, 2.4V to 3.6V for IS61WV25616BLL. |
| E1 | VDD | power_in | Power supply, 2.4V to 3.6V for IS61WV25616BLL. |
| E2 | I/O12 | bidirectional | Data input/output 12, part of the upper byte controlled by UB. |
| E3 | NC | unconnected | No connection. |
| E4 | A16 | input | Address input A16 of the A0-A17 address bus. |
| E5 | I/O4 | bidirectional | Data input/output 4, part of the lower byte controlled by LB. |
| E6 | GND | power_in | Ground. |
| F1 | I/O14 | bidirectional | Data input/output 14, part of the upper byte controlled by UB. |
| F2 | I/O13 | bidirectional | Data input/output 13, part of the upper byte controlled by UB. |
| F3 | A14 | input | Address input A14 of the A0-A17 address bus. |
| F4 | A15 | input | Address input A15 of the A0-A17 address bus. |
| F5 | I/O5 | bidirectional | Data input/output 5, part of the lower byte controlled by LB. |
| F6 | I/O6 | bidirectional | Data input/output 6, part of the lower byte controlled by LB. |
| G1 | I/O15 | bidirectional | Data input/output 15, part of the upper byte controlled by UB. |
| G2 | NC | unconnected | No connection. |
| G3 | A12 | input | Address input A12 of the A0-A17 address bus. |
| G4 | A13 | input | Address input A13 of the A0-A17 address bus. |
| G5 | WE | input | Active-LOW Write Enable input that controls both writing and reading of the memory. |
| G6 | I/O7 | bidirectional | Data input/output 7, part of the lower byte controlled by LB. |
| H1 | NC | unconnected | No connection. |
| H2 | A8 | input | Address input A8 of the A0-A17 address bus. |
| H3 | A9 | input | Address input A9 of the A0-A17 address bus. |
| H4 | A10 | input | Address input A10 of the A0-A17 address bus. |
| H5 | A11 | input | Address input A11 of the A0-A17 address bus. |
| H6 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | TFBGA-48 |
| Category | Memory |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output HIGH Voltage | VOH | 1.8 | V | VDD = Min., IOH = -1.0 mA | 4 | ||
| Output LOW Voltage | VOL | 0.4 | V | VDD = Min., IOL = 1.0 mA | 4 | ||
| Input HIGH Voltage | VIH | 2 | V | VDD = 2.4V-3.6V; max VDD + 0.3 | 4 | ||
| Input LOW Voltage | VIL | -0.3 | 0.8 | V | VDD = 2.4V-3.6V | 4 | |
| Input Leakage | ILI | -1 | 1 | µA | GND ≤ VIN ≤ VDD | 4 | |
| Output Leakage | ILO | -1 | 1 | µA | GND ≤ VOUT ≤ VDD, Outputs Disabled | 4 | |
| VDD Dynamic Operating Supply Current | ICC | 25 | 45 | mA | VDD = Max., IOUT = 0 mA, f = fMAX, Ind. | 7 | |
| Operating Supply Current | ICC1 | 40 | mA | VDD = Max., IOUT = 0 mA, f = 0, Ind. | 7 | ||
| TTL Standby Current | ISB1 | 15 | mA | VDD = Max., VIN = VIH or VIL, CE ≥ VIH, f = 0, Ind. | 7 | ||
| CMOS Standby Current | ISB2 | 2 | 9 | mA | VDD = Max., CE ≥ VDD, 0.2V, VIN ≥ VDD, 0.2V or VIN ≤ 0.2V, f = 0, Ind. | 7 | |
| Terminal Voltage with Respect to GND | VTERM | -0.5 | V | -0.5 to VDD + 0.5 | 6 | ||
| VDD Relates to GND | VDD | -0.3 | 4 | V | -0.3 to 4.0 | 6 | |
| Storage Temperature | TSTG | -65 | 150 | °C | -65 to +150 | 6 | |
| Power Dissipation | PT | 1 | W | 6 | |||
| Input Capacitance | CIN | 6 | pF | VIN = 0V, TA = 25°C, f = 1 MHz, VDD = 3.3V | 6 | ||
| Input/Output Capacitance | CI/O | 8 | pF | VOUT = 0V, TA = 25°C, f = 1 MHz, VDD = 3.3V | 6 | ||
| Supply Voltage (10 ns) | VDD | 2.4 | 3.6 | V | Industrial, 10 ns | 7 | |
| Ambient Temperature, Industrial | TA | -40 | 85 | °C | Industrial | 7 | |
| VDD for Data Retention | VDR | 2 | 3.6 | V | See Data Retention Waveform | 16 | |
| Data Retention Current | IDR | 9 | mA | VDD = 2.0V, CE ≥ VDD, 0.2V, Ind. | 16 | ||
| Data Retention Setup Time | tSDR | 0 | ns | See Data Retention Waveform | 16 | ||
| Read Cycle Time | tRC | 10 | ns | -10 | 9 | ||
| Address Access Time | tAA | 10 | ns | -10 | 9 | ||
| Output Hold Time | tOHA | 2 | ns | -10 | 9 | ||
| CE Access Time | tACE | 10 | ns | -10 | 9 | ||
| OE Access Time | tDOE | 4.5 | ns | -10 | 9 | ||
| OE to High-Z Output | tHZOE | 4 | ns | -10 | 9 | ||
| OE to Low-Z Output | tLZOE | 0 | ns | -10 | 9 | ||
| CE to High-Z Output | tHZCE | 0 | 4 | ns | -10 | 9 | |
| CE to Low-Z Output | tLZCE | 3 | ns | -10 | 9 | ||
| LB, UB Access Time | tBA | 6.5 | ns | -10 | 9 | ||
| LB, UB to High-Z Output | tHZB | 0 | 3 | ns | -10 | 9 | |
| LB, UB to Low-Z Output | tLZB | 0 | ns | -10 | 9 | ||
| Power Up Time | tPU | 0 | ns | -10 | 9 | ||
| Power Down Time | tPD | 10 | ns | -10 | 9 | ||
| Write Cycle Time | tWC | 10 | ns | -10 | 12 | ||
| CE to Write End | tSCE | 8 | ns | -10 | 12 | ||
| Address Setup Time to Write End | tAW | 8 | ns | -10 | 12 | ||
| Address Hold from Write End | tHA | 0 | ns | -10 | 12 | ||
| Address Setup Time | tSA | 0 | ns | -10 | 12 | ||
| LB, UB Valid to End of Write | tPWB | 8 | ns | -10 | 12 | ||
| WE Pulse Width | tPWE1 | 8 | ns | -10 | 12 | ||
| WE Pulse Width (OE = LOW) | tPWE2 | 10 | ns | -10 | 12 | ||
| Data Setup to Write End | tSD | 6 | ns | -10 | 12 | ||
| Data Hold from Write End | tHD | 0 | ns | -10 | 12 | ||
| WE LOW to High-Z Output | tHZWE | 5 | ns | -10 | 12 | ||
| WE HIGH to Low-Z Output | tLZWE | 2 | ns | -10 | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | IS64WV25616BLL-10BLA3 48 mini BGA (6mm x 8mm), Lead-free IS64WV25616BLL-10CTA3 TSOP (Type II), Copper Leadframe | 18 |
CAD (KiCad official)
- Symbol:
IS61WV25616BLL-10BLI - Footprint:
Package_BGA:TFBGA-48_6x10mm_Layout6x8_P0.75mm - 3D model: TFBGA-48, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal BGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is61wv25616bll-10bli-etched.step/is61wv25616bll-10bli-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is61wv25616bll-10bli.step/is61wv25616bll-10bli.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (21 pp, sha256
72cbb9206f27ca2b, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).