main
Ray Publish 0.1.0 efa2647

IS43TR16128BL-125KBLI

ISSI(Integrated Silicon Solution) · DDR SDRAM · BGA-96(13x9)

IS43TR16128BL-125KBLI from ISSI(Integrated Silicon Solution), in a BGA-96(13x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
A1 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
A2 DQU5 bidirectional Upper-byte bidirectional data I/O bit 5, strobed by DQSU/DQSU#.
A3 DQU7 bidirectional Upper-byte bidirectional data I/O bit 7, strobed by DQSU/DQSU#.
A7 DQU4 bidirectional Upper-byte bidirectional data I/O bit 4, strobed by DQSU/DQSU#.
A8 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
A9 VSS power_in Ground.
B1 VSSQ power_in DQ ground.
B2 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
B3 VSS power_in Ground.
B7 DQSU# bidirectional Upper-byte differential data strobe complement; output with read data, input with write data.
B8 DQU6 bidirectional Upper-byte bidirectional data I/O bit 6, strobed by DQSU/DQSU#.
B9 VSSQ power_in DQ ground.
C1 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
C2 DQU3 bidirectional Upper-byte bidirectional data I/O bit 3, strobed by DQSU/DQSU#.
C3 DQU1 bidirectional Upper-byte bidirectional data I/O bit 1, strobed by DQSU/DQSU#.
C7 DQSU bidirectional Upper-byte differential data strobe; output with read data, input with write data, edge-aligned with read data and centered in write data.
C8 DQU2 bidirectional Upper-byte bidirectional data I/O bit 2, strobed by DQSU/DQSU#.
C9 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
D1 VSSQ power_in DQ ground.
D2 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
D3 DMU input Upper-byte input data mask; write data is masked when DMU is sampled HIGH coincident with that data.
D7 DQU0 bidirectional Upper-byte bidirectional data I/O bit 0, strobed by DQSU/DQSU#.
D8 VSSQ power_in DQ ground.
D9 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
E1 VSS power_in Ground.
E2 VSSQ power_in DQ ground.
E3 DQL0 bidirectional Lower-byte bidirectional data I/O bit 0, strobed by DQSL/DQSL#.
E7 DML input Lower-byte input data mask; write data is masked when DML is sampled HIGH coincident with that data.
E8 VSSQ power_in DQ ground.
E9 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
F1 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
F2 DQL2 bidirectional Lower-byte bidirectional data I/O bit 2, strobed by DQSL/DQSL#.
F3 DQSL bidirectional Lower-byte differential data strobe; output with read data, input with write data, edge-aligned with read data and centered in write data.
F7 DQL1 bidirectional Lower-byte bidirectional data I/O bit 1, strobed by DQSL/DQSL#.
F8 DQL3 bidirectional Lower-byte bidirectional data I/O bit 3, strobed by DQSL/DQSL#.
F9 VSSQ power_in DQ ground.
G1 VSSQ power_in DQ ground.
G2 DQL6 bidirectional Lower-byte bidirectional data I/O bit 6, strobed by DQSL/DQSL#.
G3 DQSL# bidirectional Lower-byte differential data strobe complement; output with read data, input with write data.
G7 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
G8 VSS power_in Ground.
G9 VSSQ power_in DQ ground.
H1 VREFDQ power_in Reference voltage for DQ, which must be maintained stable during all operations including self-refresh.
H2 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
H3 DQL4 bidirectional Lower-byte bidirectional data I/O bit 4, strobed by DQSL/DQSL#.
H7 DQL7 bidirectional Lower-byte bidirectional data I/O bit 7, strobed by DQSL/DQSL#.
H8 DQL5 bidirectional Lower-byte bidirectional data I/O bit 5, strobed by DQSL/DQSL#.
H9 VDDQ power_in DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
J1 NC unconnected No connect; no internal electrical connection.
J2 VSS power_in Ground.
J3 RAS# input Command input which together with CS#, CAS# and WE# defines the command being entered.
J7 CK input Differential clock input; address and control inputs are sampled on the crossing of CK rising and CK# falling.
J8 VSS power_in Ground.
J9 NC unconnected No connect; no internal electrical connection.
K1 ODT input On-die termination enable; when registered HIGH it enables termination on DQ, DQSU/DQSU#, DQSL/DQSL#, DMU and DML, and is ignored if MR1 and MR2 disable RTT.
K2 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
K3 CAS# input Command input which together with CS#, RAS# and WE# defines the command being entered.
K7 CK# input Differential clock complement input; address and control inputs are sampled on the crossing of CK rising and CK# falling.
K8 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
K9 CKE input Clock enable; HIGH activates and LOW deactivates internal clock signals, input buffers and output drivers, and must stay high during read and write accesses.
L1 NC unconnected No connect; no internal electrical connection.
L2 CS# input Chip select; all commands are masked when CS# is registered HIGH.
L3 WE# input Command input which together with CS#, RAS# and CAS# defines the command being entered.
L7 A10/AP input Address bit 10, also auto-precharge select sampled during Read/Write (HIGH: auto-precharge) and selects one bank or all banks during Precharge.
L8 ZQ passive Reference pin for ZQ calibration (RZQ = 240 ohm).
L9 NC unconnected No connect; no internal electrical connection.
M1 VSS power_in Ground.
M2 BA0 input Bank address bit 0, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS.
M3 BA2 input Bank address bit 2, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS.
M7 NC(A15) unconnected No connect with no internal connection, reserved for higher densities.
M8 VREFCA power_in Reference voltage for command/address, which must be maintained stable during all operations including self-refresh.
M9 VSS power_in Ground.
N1 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
N2 A3 input Address input providing row and column address and mode register op-code bits.
N3 A0 input Address input providing row and column address and mode register op-code bits.
N7 A12/BC# input Address bit 12, also burst chop select sampled during Read/Write (HIGH: no burst chop; LOW: burst chopped).
N8 BA1 input Bank address bit 1, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS.
N9 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
P1 VSS power_in Ground.
P2 A5 input Address input providing row and column address and mode register op-code bits.
P3 A2 input Address input providing row and column address and mode register op-code bits.
P7 A1 input Address input providing row and column address and mode register op-code bits.
P8 A4 input Address input providing row and column address and mode register op-code bits.
P9 VSS power_in Ground.
R1 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
R2 A7 input Address input providing row and column address and mode register op-code bits.
R3 A9 input Address input providing row and column address and mode register op-code bits.
R7 A11 input Address input providing row and column address and mode register op-code bits.
R8 A6 input Address input providing row and column address and mode register op-code bits.
R9 VDD power_in Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V.
T1 VSS power_in Ground.
T2 RESET# input Active-low asynchronous reset, which must be HIGH during normal operation; CMOS levels with DC high at 80% and DC low at 20% of VDD.
T3 A13 input Address input providing row and column address and mode register op-code bits.
T7 NC(A14) unconnected No connect with no internal connection, reserved for higher densities.
T8 A8 input Address input providing row and column address and mode register op-code bits.
T9 VSS power_in Ground.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package BGA-96(13x9)
Category Memory
Pins 96

CAD (KiCad official)

  • Symbol: IS43TR16128BL-125KBLI
  • Footprint: Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm
  • 3D model: BGA-96(13x9) (KiCad packages3D, STEP)
  • 3D model files: is43tr16128bl-125kbli-etched.step / is43tr16128bl-125kbli-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is43tr16128bl-125kbli.step / is43tr16128bl-125kbli.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (87 pp, sha256 a3d8d1620a9013c0, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF