3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS43TR16128BL-125KBLI
ISSI(Integrated Silicon Solution) · DDR SDRAM · BGA-96(13x9)
IS43TR16128BL-125KBLI from ISSI(Integrated Silicon Solution), in a BGA-96(13x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| A2 | DQU5 | bidirectional | Upper-byte bidirectional data I/O bit 5, strobed by DQSU/DQSU#. |
| A3 | DQU7 | bidirectional | Upper-byte bidirectional data I/O bit 7, strobed by DQSU/DQSU#. |
| A7 | DQU4 | bidirectional | Upper-byte bidirectional data I/O bit 4, strobed by DQSU/DQSU#. |
| A8 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| A9 | VSS | power_in | Ground. |
| B1 | VSSQ | power_in | DQ ground. |
| B2 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| B3 | VSS | power_in | Ground. |
| B7 | DQSU# | bidirectional | Upper-byte differential data strobe complement; output with read data, input with write data. |
| B8 | DQU6 | bidirectional | Upper-byte bidirectional data I/O bit 6, strobed by DQSU/DQSU#. |
| B9 | VSSQ | power_in | DQ ground. |
| C1 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| C2 | DQU3 | bidirectional | Upper-byte bidirectional data I/O bit 3, strobed by DQSU/DQSU#. |
| C3 | DQU1 | bidirectional | Upper-byte bidirectional data I/O bit 1, strobed by DQSU/DQSU#. |
| C7 | DQSU | bidirectional | Upper-byte differential data strobe; output with read data, input with write data, edge-aligned with read data and centered in write data. |
| C8 | DQU2 | bidirectional | Upper-byte bidirectional data I/O bit 2, strobed by DQSU/DQSU#. |
| C9 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| D1 | VSSQ | power_in | DQ ground. |
| D2 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| D3 | DMU | input | Upper-byte input data mask; write data is masked when DMU is sampled HIGH coincident with that data. |
| D7 | DQU0 | bidirectional | Upper-byte bidirectional data I/O bit 0, strobed by DQSU/DQSU#. |
| D8 | VSSQ | power_in | DQ ground. |
| D9 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| E1 | VSS | power_in | Ground. |
| E2 | VSSQ | power_in | DQ ground. |
| E3 | DQL0 | bidirectional | Lower-byte bidirectional data I/O bit 0, strobed by DQSL/DQSL#. |
| E7 | DML | input | Lower-byte input data mask; write data is masked when DML is sampled HIGH coincident with that data. |
| E8 | VSSQ | power_in | DQ ground. |
| E9 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| F1 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| F2 | DQL2 | bidirectional | Lower-byte bidirectional data I/O bit 2, strobed by DQSL/DQSL#. |
| F3 | DQSL | bidirectional | Lower-byte differential data strobe; output with read data, input with write data, edge-aligned with read data and centered in write data. |
| F7 | DQL1 | bidirectional | Lower-byte bidirectional data I/O bit 1, strobed by DQSL/DQSL#. |
| F8 | DQL3 | bidirectional | Lower-byte bidirectional data I/O bit 3, strobed by DQSL/DQSL#. |
| F9 | VSSQ | power_in | DQ ground. |
| G1 | VSSQ | power_in | DQ ground. |
| G2 | DQL6 | bidirectional | Lower-byte bidirectional data I/O bit 6, strobed by DQSL/DQSL#. |
| G3 | DQSL# | bidirectional | Lower-byte differential data strobe complement; output with read data, input with write data. |
| G7 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| G8 | VSS | power_in | Ground. |
| G9 | VSSQ | power_in | DQ ground. |
| H1 | VREFDQ | power_in | Reference voltage for DQ, which must be maintained stable during all operations including self-refresh. |
| H2 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| H3 | DQL4 | bidirectional | Lower-byte bidirectional data I/O bit 4, strobed by DQSL/DQSL#. |
| H7 | DQL7 | bidirectional | Lower-byte bidirectional data I/O bit 7, strobed by DQSL/DQSL#. |
| H8 | DQL5 | bidirectional | Lower-byte bidirectional data I/O bit 5, strobed by DQSL/DQSL#. |
| H9 | VDDQ | power_in | DQ power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| J1 | NC | unconnected | No connect; no internal electrical connection. |
| J2 | VSS | power_in | Ground. |
| J3 | RAS# | input | Command input which together with CS#, CAS# and WE# defines the command being entered. |
| J7 | CK | input | Differential clock input; address and control inputs are sampled on the crossing of CK rising and CK# falling. |
| J8 | VSS | power_in | Ground. |
| J9 | NC | unconnected | No connect; no internal electrical connection. |
| K1 | ODT | input | On-die termination enable; when registered HIGH it enables termination on DQ, DQSU/DQSU#, DQSL/DQSL#, DMU and DML, and is ignored if MR1 and MR2 disable RTT. |
| K2 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| K3 | CAS# | input | Command input which together with CS#, RAS# and WE# defines the command being entered. |
| K7 | CK# | input | Differential clock complement input; address and control inputs are sampled on the crossing of CK rising and CK# falling. |
| K8 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| K9 | CKE | input | Clock enable; HIGH activates and LOW deactivates internal clock signals, input buffers and output drivers, and must stay high during read and write accesses. |
| L1 | NC | unconnected | No connect; no internal electrical connection. |
| L2 | CS# | input | Chip select; all commands are masked when CS# is registered HIGH. |
| L3 | WE# | input | Command input which together with CS#, RAS# and CAS# defines the command being entered. |
| L7 | A10/AP | input | Address bit 10, also auto-precharge select sampled during Read/Write (HIGH: auto-precharge) and selects one bank or all banks during Precharge. |
| L8 | ZQ | passive | Reference pin for ZQ calibration (RZQ = 240 ohm). |
| L9 | NC | unconnected | No connect; no internal electrical connection. |
| M1 | VSS | power_in | Ground. |
| M2 | BA0 | input | Bank address bit 0, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| M3 | BA2 | input | Bank address bit 2, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| M7 | NC(A15) | unconnected | No connect with no internal connection, reserved for higher densities. |
| M8 | VREFCA | power_in | Reference voltage for command/address, which must be maintained stable during all operations including self-refresh. |
| M9 | VSS | power_in | Ground. |
| N1 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| N2 | A3 | input | Address input providing row and column address and mode register op-code bits. |
| N3 | A0 | input | Address input providing row and column address and mode register op-code bits. |
| N7 | A12/BC# | input | Address bit 12, also burst chop select sampled during Read/Write (HIGH: no burst chop; LOW: burst chopped). |
| N8 | BA1 | input | Bank address bit 1, selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| N9 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| P1 | VSS | power_in | Ground. |
| P2 | A5 | input | Address input providing row and column address and mode register op-code bits. |
| P3 | A2 | input | Address input providing row and column address and mode register op-code bits. |
| P7 | A1 | input | Address input providing row and column address and mode register op-code bits. |
| P8 | A4 | input | Address input providing row and column address and mode register op-code bits. |
| P9 | VSS | power_in | Ground. |
| R1 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| R2 | A7 | input | Address input providing row and column address and mode register op-code bits. |
| R3 | A9 | input | Address input providing row and column address and mode register op-code bits. |
| R7 | A11 | input | Address input providing row and column address and mode register op-code bits. |
| R8 | A6 | input | Address input providing row and column address and mode register op-code bits. |
| R9 | VDD | power_in | Power supply: 1.35V +0.1V/-0.067V for the low-voltage (L) part, backward compatible to 1.5V. |
| T1 | VSS | power_in | Ground. |
| T2 | RESET# | input | Active-low asynchronous reset, which must be HIGH during normal operation; CMOS levels with DC high at 80% and DC low at 20% of VDD. |
| T3 | A13 | input | Address input providing row and column address and mode register op-code bits. |
| T7 | NC(A14) | unconnected | No connect with no internal connection, reserved for higher densities. |
| T8 | A8 | input | Address input providing row and column address and mode register op-code bits. |
| T9 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | BGA-96(13x9) |
| Category | Memory |
| Pins | 96 |
CAD (KiCad official)
- Symbol:
IS43TR16128BL-125KBLI - Footprint:
Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm - 3D model: BGA-96(13x9) (KiCad packages3D, STEP)
- 3D model files:
is43tr16128bl-125kbli-etched.step/is43tr16128bl-125kbli-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is43tr16128bl-125kbli.step/is43tr16128bl-125kbli.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (87 pp, sha256
a3d8d1620a9013c0, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).