main
Ray Publish 0.1.0 f0dea8f

IS32LT3178-GRLA3-TR

ISSI(Integrated Silicon Solution) · LED Drivers · SOP-8-EP

IS32LT3178-GRLA3-TR from ISSI(Integrated Silicon Solution), in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Current sink output to the LED string, which requires a minimum headroom voltage of 1.5V at 200mA for the SOP-8-EP package.
2 OUT output Current sink output to the LED string, which requires a minimum headroom voltage of 1.5V at 200mA for the SOP-8-EP package.
3 EN input Enable pin, which is a PWM input on the IS32LT3178; absolute maximum enable voltage is 44V for the IS32LT3177 and 6.0V for the IS32LT3178.
4 ISET passive Output current setting pin; a resistor between this pin and GND sets the maximum output current, with RISET between 8kΩ and 160kΩ for the SOP-8-EP package, and the pin must not be left floating.
5 GND power_in Ground pin that must be connected to supply ground.
6 GND power_in Ground pin that must be connected to supply ground.
7 GND power_in Ground pin that must be connected to supply ground.
8 GND power_in Ground pin that must be connected to supply ground.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOP-8-EP
Category Nixie Tube Driver/LED Driver
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output current IOUT 97 100 103 mA VOUT> 1.0V, VEN= 3.3V, RISET= 16kΩ, SOP-8-EP; room temp TA=TJ=25°C (♦) 5
Output current IOUT 95 100 105 mA VOUT> 1.0V, VEN= 3.3V, RISET= 16kΩ, SOP-8-EP; full temp -40°C~125°C (◊) 5
Output current IOUT 194 200 206 mA VOUT> 1.5V, VEN= 3.3V, RISET= 8kΩ, SOP-8-EP; room temp TA=TJ=25°C (♦) 6
Output current IOUT 190 200 210 mA VOUT> 1.5V, VEN= 3.3V, RISET= 8kΩ, SOP-8-EP; full temp -40°C~125°C (◊) 6
Output current IOUT 10 mA VOUT= 0.8V, VEN= 3.3V, RISET= 160kΩ; room temp TA=TJ=25°C (♦) 5
Output current limit IOUT_LIMIT 295 mA RISET= GND, VEN= 3.3V 6
Current setting reference voltage VISET 1 V 5
Enable current IEN 0.5 1 mA VEN= 3.3V, RISET=16kΩ 5
OUT pin breakdown voltage VBD_OUT 40 V VEN= 0V 5
EN pin undervoltage lockout threshold, VEN rising VUVLO 1.9 2.4 V VEN rising, IS32LT3178 6
EN pin undervoltage lockout threshold, VEN falling VUVLO 1.2 1.7 V VEN falling, IS32LT3178 6
Sufficient supply voltage on EN pin VEN 3.1 5.5 V 150mA < IOUT ≤ 200mA, VOUT=2V, SOP-8-EP 6
Minimum required headroom voltage on OUT pin VHR 1.5 V IOUT= 200mA, SOP-8-EP 6
EN pin enabling time tON 10 μs VOUT > 1.5V, VEN = 3.3V, RISET= 16kΩ 6
Thermal roll off threshold TRO 145 °C Current decreasing slope rate: -0.6%/°C (Note 8) 6
Thermal shutdown threshold TSD 170 °C Temperature rising (Note 8) 6
Thermal shutdown hysteresis TSD_HY 30 °C Temperature falling (Note 8) 6
Maximum enable voltage VEN(MAX) 6 V only for IS32LT3178 5
Maximum output current IOUT(MAX) 250 mA 5
Maximum output voltage VOUT(MAX) 44 V 5
Reverse voltage between all terminals VR 0.5 V 5
Power dissipation PD(MAX) 2.32 W SOP-8-EP (Note 6) 5
Maximum junction temperature TJMAX 150 °C 5
Storage temperature range TSTG -65 150 °C 5
Operating temperature range TA=TJ -40 125 °C 5
ESD (HBM) -2 2 kV 5
ESD (CDM) -750 750 V 5
Package thermal resistance, junction to ambient θJA 43.1 °C/W SOP-8-EP, 4 layer standard test PCB based on JESD 51-2A 5
Package thermal resistance, junction to thermal PAD θJP 1.41 °C/W SOP-8-EP, 4 layer standard test PCB based on JESD 51-8 5
Recommended maximum operating junction temperature TJ(MAX) 125 °C 16

CAD (KiCad official)

  • Symbol: IS32LT3178-GRLA3-TR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: is32lt3178-grla3-tr-etched.step / is32lt3178-grla3-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is32lt3178-grla3-tr.step / is32lt3178-grla3-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (22 pp, sha256 78ab75e127b35486, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF