Generated by kicad-footprint-generator · KiCad file format 20260206
IS32LT3178-GRLA3-TR
ISSI(Integrated Silicon Solution) · LED Drivers · SOP-8-EP
IS32LT3178-GRLA3-TR from ISSI(Integrated Silicon Solution), in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Current sink output to the LED string, which requires a minimum headroom voltage of 1.5V at 200mA for the SOP-8-EP package. |
| 2 | OUT | output | Current sink output to the LED string, which requires a minimum headroom voltage of 1.5V at 200mA for the SOP-8-EP package. |
| 3 | EN | input | Enable pin, which is a PWM input on the IS32LT3178; absolute maximum enable voltage is 44V for the IS32LT3177 and 6.0V for the IS32LT3178. |
| 4 | ISET | passive | Output current setting pin; a resistor between this pin and GND sets the maximum output current, with RISET between 8kΩ and 160kΩ for the SOP-8-EP package, and the pin must not be left floating. |
| 5 | GND | power_in | Ground pin that must be connected to supply ground. |
| 6 | GND | power_in | Ground pin that must be connected to supply ground. |
| 7 | GND | power_in | Ground pin that must be connected to supply ground. |
| 8 | GND | power_in | Ground pin that must be connected to supply ground. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOP-8-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output current | IOUT | 97 | 100 | 103 | mA | VOUT> 1.0V, VEN= 3.3V, RISET= 16kΩ, SOP-8-EP; room temp TA=TJ=25°C (♦) | 5 |
| Output current | IOUT | 95 | 100 | 105 | mA | VOUT> 1.0V, VEN= 3.3V, RISET= 16kΩ, SOP-8-EP; full temp -40°C~125°C (◊) | 5 |
| Output current | IOUT | 194 | 200 | 206 | mA | VOUT> 1.5V, VEN= 3.3V, RISET= 8kΩ, SOP-8-EP; room temp TA=TJ=25°C (♦) | 6 |
| Output current | IOUT | 190 | 200 | 210 | mA | VOUT> 1.5V, VEN= 3.3V, RISET= 8kΩ, SOP-8-EP; full temp -40°C~125°C (◊) | 6 |
| Output current | IOUT | 10 | mA | VOUT= 0.8V, VEN= 3.3V, RISET= 160kΩ; room temp TA=TJ=25°C (♦) | 5 | ||
| Output current limit | IOUT_LIMIT | 295 | mA | RISET= GND, VEN= 3.3V | 6 | ||
| Current setting reference voltage | VISET | 1 | V | 5 | |||
| Enable current | IEN | 0.5 | 1 | mA | VEN= 3.3V, RISET=16kΩ | 5 | |
| OUT pin breakdown voltage | VBD_OUT | 40 | V | VEN= 0V | 5 | ||
| EN pin undervoltage lockout threshold, VEN rising | VUVLO | 1.9 | 2.4 | V | VEN rising, IS32LT3178 | 6 | |
| EN pin undervoltage lockout threshold, VEN falling | VUVLO | 1.2 | 1.7 | V | VEN falling, IS32LT3178 | 6 | |
| Sufficient supply voltage on EN pin | VEN | 3.1 | 5.5 | V | 150mA < IOUT ≤ 200mA, VOUT=2V, SOP-8-EP | 6 | |
| Minimum required headroom voltage on OUT pin | VHR | 1.5 | V | IOUT= 200mA, SOP-8-EP | 6 | ||
| EN pin enabling time | tON | 10 | μs | VOUT > 1.5V, VEN = 3.3V, RISET= 16kΩ | 6 | ||
| Thermal roll off threshold | TRO | 145 | °C | Current decreasing slope rate: -0.6%/°C (Note 8) | 6 | ||
| Thermal shutdown threshold | TSD | 170 | °C | Temperature rising (Note 8) | 6 | ||
| Thermal shutdown hysteresis | TSD_HY | 30 | °C | Temperature falling (Note 8) | 6 | ||
| Maximum enable voltage | VEN(MAX) | 6 | V | only for IS32LT3178 | 5 | ||
| Maximum output current | IOUT(MAX) | 250 | mA | 5 | |||
| Maximum output voltage | VOUT(MAX) | 44 | V | 5 | |||
| Reverse voltage between all terminals | VR | 0.5 | V | 5 | |||
| Power dissipation | PD(MAX) | 2.32 | W | SOP-8-EP (Note 6) | 5 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 5 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 5 | ||
| Operating temperature range | TA=TJ | -40 | 125 | °C | 5 | ||
| ESD (HBM) | -2 | 2 | kV | 5 | |||
| ESD (CDM) | -750 | 750 | V | 5 | |||
| Package thermal resistance, junction to ambient | θJA | 43.1 | °C/W | SOP-8-EP, 4 layer standard test PCB based on JESD 51-2A | 5 | ||
| Package thermal resistance, junction to thermal PAD | θJP | 1.41 | °C/W | SOP-8-EP, 4 layer standard test PCB based on JESD 51-8 | 5 | ||
| Recommended maximum operating junction temperature | TJ(MAX) | 125 | °C | 16 |
CAD (KiCad official)
- Symbol:
IS32LT3178-GRLA3-TR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
is32lt3178-grla3-tr-etched.step/is32lt3178-grla3-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is32lt3178-grla3-tr.step/is32lt3178-grla3-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (22 pp, sha256
78ab75e127b35486, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).