Generated by kicad-footprint-generator · KiCad file format 20260206
IS31LT3354-STLS2-TR
Lumissil Microsystems · LED Drivers · SOT-23-5
IS31LT3354-STLS2-TR from Lumissil Microsystems, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE | output | Output gate driver for an external N-MOSFET (gate limits -0.3V to +6V). |
| 2 | GND | power_in | Ground (0V); should be soldered directly to the ground plane. |
| 3 | ADJ | input | Multi-function on/off and brightness control: floating gives VREF=1.2V nominal current IOUTnom=0.1/RS, below 0.2V turns output off, 0.3V to 1.2V DC adjusts current from 25% to 100%, or drive with PWM; above 1.2V is clamped to 100%. |
| 4 | ISENSE | input | Connect current-sense resistor RS from this pin to VIN to set nominal average output current IOUTnom=0.1/RS. |
| 5 | VIN | power_in | Input voltage 6V to 40V; decouple to ground with 1μF or higher X7R ceramic capacitor close to the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lumissil Microsystems |
| Package | SOT-23-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 6 | 40 | V | 3 | ||
| Quiescent supply current with output off | IINQoff | 80 | 95 | 110 | μA | ADJ pin grounded | 3 |
| Quiescent supply current with output switching | IINQon | 450 | 600 | μA | ADJ pin floating | 3 | |
| Mean current sense threshold voltage | VSENSE | 91 | 96 | 101 | mV | 3 | |
| ISENSE pin input current | ISENSE | 8 | 10 | μA | VSENSE = 0.1V | 3 | |
| External control voltage range on ADJ pin for dc brightness control | VADJ | 0.3 | 1.2 | V | 3 | ||
| DC voltage on ADJ pin to switch chip from active to quiescent state | VADJoff | 0.15 | 0.2 | 0.25 | V | VADJ falling | 3 |
| DC voltage on ADJ pin to switch chip from quiescent to active state | VADJon | 0.2 | 0.25 | 0.3 | V | VADJ rising | 3 |
| Recommended duty cycle range of output switch at fSWmax | DSW | 0.3 | 0.7 | 0.9 | 4 | ||
| Input voltage absolute maximum | VIN | -0.3 | 50 | V | 3 | ||
| GATE pin voltage | VGATE | -0.3 | 6 | V | 3 | ||
| Adjust pin input voltage | VADJ | -0.3 | 6 | V | 3 | ||
| Power dissipation | Ptot | 600 | mW | SOT23-5 | 3 | ||
| Operating temperature | TOP | -40 | 85 | °C | 3 | ||
| Storage temperature | TST | -55 | 150 | °C | 3 | ||
| Junction temperature | Tj MAX | 150 | °C | 3 | |||
| ESD susceptibility (human body model) | ESD | 4 | kV | 3 | |||
| Junction to ambient thermal resistance | RJA | 108 | °C/W | SOT23-5 | 3 | ||
| Sense threshold hysteresis | VSENSEHYS | 15 | % | ±15 % | 3 | ||
| Internal reference voltage | VREF | 1.2 | V | Measured on ADJ pin with pin floating | 3 | ||
| Resistance between ADJ pin and VREF | RADJ | 500 | KΩ | 3 | |||
| Gate sourcing current | Isource | 80 | mA | 4 | |||
| Gate sinking current | Isink | 100 | mA | 4 | |||
| Operating frequency | fSW | 154 | KHz | ADJ pin floating, L=100μH (0.82Ω), IOUT=350mA @ VLED=3.4V, driving 1 LED | 4 | ||
| Minimum switch ON time | TONmin | 200 | ns | 4 | |||
| Minimum switch OFF time | TOFFmin | 200 | ns | 4 | |||
| Recommended maximum operating frequency | fSWmax | 1 | MHz | 4 | |||
| Internal comparator propagation delay | TPD | 50 | ns | 4 | |||
| Thermal shutdown temperature | TSD | 140 | °C | 4 | |||
| Thermal shutdown hysteresis | TSD-HYS | 20 | °C | 4 |
CAD (KiCad official)
- Symbol:
IS31LT3354-STLS2-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
is31lt3354-stls2-tr-etched.step/is31lt3354-stls2-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is31lt3354-stls2-tr.step/is31lt3354-stls2-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lumissil Microsystems datasheet (12 pp, sha256
815486480cd0d5fa, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).