Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS31LT3354-STLS2-TR

Lumissil Microsystems · LED Drivers · SOT-23-5

IS31LT3354-STLS2-TR from Lumissil Microsystems, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GATE output Output gate driver for an external N-MOSFET (gate limits -0.3V to +6V).
2 GND power_in Ground (0V); should be soldered directly to the ground plane.
3 ADJ input Multi-function on/off and brightness control: floating gives VREF=1.2V nominal current IOUTnom=0.1/RS, below 0.2V turns output off, 0.3V to 1.2V DC adjusts current from 25% to 100%, or drive with PWM; above 1.2V is clamped to 100%.
4 ISENSE input Connect current-sense resistor RS from this pin to VIN to set nominal average output current IOUTnom=0.1/RS.
5 VIN power_in Input voltage 6V to 40V; decouple to ground with 1μF or higher X7R ceramic capacitor close to the device.

Key specifications

Parameter Value
Manufacturer Lumissil Microsystems
Package SOT-23-5
Category Display Modules / LED Drivers / Display Drivers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 6 40 V 3
Quiescent supply current with output off IINQoff 80 95 110 μA ADJ pin grounded 3
Quiescent supply current with output switching IINQon 450 600 μA ADJ pin floating 3
Mean current sense threshold voltage VSENSE 91 96 101 mV 3
ISENSE pin input current ISENSE 8 10 μA VSENSE = 0.1V 3
External control voltage range on ADJ pin for dc brightness control VADJ 0.3 1.2 V 3
DC voltage on ADJ pin to switch chip from active to quiescent state VADJoff 0.15 0.2 0.25 V VADJ falling 3
DC voltage on ADJ pin to switch chip from quiescent to active state VADJon 0.2 0.25 0.3 V VADJ rising 3
Recommended duty cycle range of output switch at fSWmax DSW 0.3 0.7 0.9 4
Input voltage absolute maximum VIN -0.3 50 V 3
GATE pin voltage VGATE -0.3 6 V 3
Adjust pin input voltage VADJ -0.3 6 V 3
Power dissipation Ptot 600 mW SOT23-5 3
Operating temperature TOP -40 85 °C 3
Storage temperature TST -55 150 °C 3
Junction temperature Tj MAX 150 °C 3
ESD susceptibility (human body model) ESD 4 kV 3
Junction to ambient thermal resistance RJA 108 °C/W SOT23-5 3
Sense threshold hysteresis VSENSEHYS 15 % ±15 % 3
Internal reference voltage VREF 1.2 V Measured on ADJ pin with pin floating 3
Resistance between ADJ pin and VREF RADJ 500 KΩ 3
Gate sourcing current Isource 80 mA 4
Gate sinking current Isink 100 mA 4
Operating frequency fSW 154 KHz ADJ pin floating, L=100μH (0.82Ω), IOUT=350mA @ VLED=3.4V, driving 1 LED 4
Minimum switch ON time TONmin 200 ns 4
Minimum switch OFF time TOFFmin 200 ns 4
Recommended maximum operating frequency fSWmax 1 MHz 4
Internal comparator propagation delay TPD 50 ns 4
Thermal shutdown temperature TSD 140 °C 4
Thermal shutdown hysteresis TSD-HYS 20 °C 4

CAD (KiCad official)

  • Symbol: IS31LT3354-STLS2-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: is31lt3354-stls2-tr-etched.step / is31lt3354-stls2-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is31lt3354-stls2-tr.step / is31lt3354-stls2-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Lumissil Microsystems datasheet (12 pp, sha256 815486480cd0d5fa, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF