main
Ray
Publish 0.1.0
6ac924a
IS25WP512M-JLLE-TR
ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)
IS25WP512M-JLLE-TR from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: when high the device is deselected, outputs are high impedance and it goes to low-power standby, and it must transition from high to low before a new instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI, which becomes bidirectional IO1 in Dual and Quad SPI modes, with data changing on the falling edge of SCK. |
| 3 | WP# (IO2) | bidirectional | Write Protect that protects the Status Register in conjunction with the SRWD bit when pulled low, and becomes IO2 when the QE bit is set to 1. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input in standard SPI, which becomes bidirectional IO0 in Dual and Quad SPI modes, with data written on the rising edge of SCK. |
| 6 | SCK | input | Serial Data Clock: synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | Acts as HOLD# (P7=0, default) or RESET# (P7=1) when QE=0, and becomes IO3 when the QE bit is set to 1; HOLD# is active low and pauses serial communication while the device is selected. |
| 8 | Vcc | power_in | Device core power supply, 1.70V to 1.95V for IS25WP and 2.30V to 3.60V for IS25LP. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
IS25WP512M-JLLE-TR - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is25wp512m-jlle-tr-etched.step/is25wp512m-jlle-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25wp512m-jlle-tr.step/is25wp512m-jlle-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (185 pp, sha256
f582af035cc5cb9f, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# IS25WP512M-JLLE-TR
**ISSI(Integrated Silicon Solution)** · NOR FLASH · WSON-8-EP(6x8)
IS25WP512M-JLLE-TR from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: when high the device is deselected, outputs are high impedance and it goes to low-power standby, and it must transition from high to low before a new instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI, which becomes bidirectional IO1 in Dual and Quad SPI modes, with data changing on the falling edge of SCK. |
| 3 | WP# (IO2) | bidirectional | Write Protect that protects the Status Register in conjunction with the SRWD bit when pulled low, and becomes IO2 when the QE bit is set to 1. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input in standard SPI, which becomes bidirectional IO0 in Dual and Quad SPI modes, with data written on the rising edge of SCK. |
| 6 | SCK | input | Serial Data Clock: synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | Acts as HOLD# (P7=0, default) or RESET# (P7=1) when QE=0, and becomes IO3 when the QE bit is set to 1; HOLD# is active low and pauses serial communication while the device is selected. |
| 8 | Vcc | power_in | Device core power supply, 1.70V to 1.95V for IS25WP and 2.30V to 3.60V for IS25LP. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `IS25WP512M-JLLE-TR`
- Footprint: `Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm`
- 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `is25wp512m-jlle-tr-etched.step` / `is25wp512m-jlle-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `is25wp512m-jlle-tr.step` / `is25wp512m-jlle-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ISSI(Integrated Silicon Solution) datasheet](docs/is25wp512m-jlle-tr-datasheet.pdf) (185 pp, sha256 `f582af035cc5cb9f`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/is25wp512m-jlle-tr-datasheet.pdf)