main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is25wp512m-jlle-tr: symbol viewer · Ray
is25wp512m-jlle-tr-etched.glb Publish 0.1.0 · Ray
is25wp512m-jlle-tr-etched.step is25wp512m-jlle-tr: factory component page (tier=lcsc) · Ray
is25wp512m-jlle-tr-hero.glb is25wp512m-jlle-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
is25wp512m-jlle-tr-hero.overlay.json Publish 0.1.0 · Ray
is25wp512m-jlle-tr.glb Publish 0.1.0 · Ray
is25wp512m-jlle-tr.kicad_mod Publish 0.1.0 · Ray
is25wp512m-jlle-tr.kicad_sym is25wp512m-jlle-tr: symbol repaired (body fitted to the names) · Ray
is25wp512m-jlle-tr.lbr is25wp512m-jlle-tr: symbol repaired (body fitted to the names) · Ray
is25wp512m-jlle-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

IS25WP512M-JLLE-TR

ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)

IS25WP512M-JLLE-TR from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: when high the device is deselected, outputs are high impedance and it goes to low-power standby, and it must transition from high to low before a new instruction is accepted.
2 SO (IO1) bidirectional Serial Data Output in standard SPI, which becomes bidirectional IO1 in Dual and Quad SPI modes, with data changing on the falling edge of SCK.
3 WP# (IO2) bidirectional Write Protect that protects the Status Register in conjunction with the SRWD bit when pulled low, and becomes IO2 when the QE bit is set to 1.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input in standard SPI, which becomes bidirectional IO0 in Dual and Quad SPI modes, with data written on the rising edge of SCK.
6 SCK input Serial Data Clock: synchronized clock for input and output timing operations.
7 HOLD# or RESET# (IO3) bidirectional Acts as HOLD# (P7=0, default) or RESET# (P7=1) when QE=0, and becomes IO3 when the QE bit is set to 1; HOLD# is active low and pauses serial communication while the device is selected.
8 Vcc power_in Device core power supply, 1.70V to 1.95V for IS25WP and 2.30V to 3.60V for IS25LP.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package WSON-8-EP(6x8)
Category Memory
Pins 9

CAD (KiCad official)

  • Symbol: IS25WP512M-JLLE-TR
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: is25wp512m-jlle-tr-etched.step / is25wp512m-jlle-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25wp512m-jlle-tr.step / is25wp512m-jlle-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (185 pp, sha256 f582af035cc5cb9f, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF