IS25WP016D-JNLE

{
  "slug": "is25wp016d-jnle",
  "version": "0.1.0",
  "type": "component",
  "description": "ISSI Integrated Silicon Solution NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "is25wp016d-jnle",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "is25wp016d-jnle.kicad_sym",
    "is25wp016d-jnle.kicad_mod",
    "is25wp016d-jnle.glb",
    "is25wp016d-jnle.step",
    "is25wp016d-jnle.lbr",
    "docs/hero.png",
    "docs/is25wp016d-jnle-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "is25wp016d-jnle-hero.glb",
    "is25wp016d-jnle-hero.overlay.json",
    "is25wp016d-jnle-etched.glb"
  ],
  "component": {
    "mpn": "IS25WP016D-JNLE",
    "manufacturer": "ISSI Integrated Silicon Solution",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923344238891008",
    "parts": {
      "symbol": "is25wp016d-jnle.kicad_sym",
      "footprint": "is25wp016d-jnle.kicad_mod",
      "model_3d": "is25wp016d-jnle-hero.glb",
      "model_3d_plain": "is25wp016d-jnle-etched.glb",
      "model_3d_step": "is25wp016d-jnle-etched.step",
      "model_3d_step_plain": "is25wp016d-jnle.step",
      "lbr": "is25wp016d-jnle.lbr"
    },
    "distributor_links": {
      "lcsc": "C1349678",
      "digikey": "706-1645-ND",
      "mouser": "870-IS25WP016D-JNLE"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T00:25:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "706-1645-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "870-IS25WP016D-JNLE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE#",
        "type": "input",
        "description": "Chip Enable: driving CE# high deselects the device and puts the outputs in high impedance, while CE# must transition from high to low after power-up before a new instruction is accepted."
      },
      {
        "number": "2",
        "name": "SO (IO1)",
        "type": "bidirectional",
        "description": "Serial Data Output: in standard SPI it reads data or status on the falling edge of SCK, and it becomes the bidirectional IO1 in Dual and Quad SPI modes."
      },
      {
        "number": "3",
        "name": "WP# (IO2)",
        "type": "bidirectional",
        "description": "Write Protect: with SRWD set to 1, pulling WP# low write-protects the Status Register bits, and it becomes IO2 when QE is set to 1, which disables the WP# function."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground: connect to ground when referenced to Vcc."
      },
      {
        "number": "5",
        "name": "SI (IO0)",
        "type": "bidirectional",
        "description": "Serial Data Input: in standard SPI it writes instructions, addresses or data on the rising edge of SCK, and it becomes the bidirectional IO0 in Dual and Quad SPI modes."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Data Clock: provides the synchronized clock for input and output timing operations."
      },
      {
        "number": "7",
        "name": "HOLD# or RESET# (IO3)",
        "type": "bidirectional",
        "description": "HOLD# is active low and pauses serial communication while CE# is low, with SO at high impedance; the pin can be set to RESET# via the P7 bit of the Read Register (default HOLD#), and it becomes IO3 when QE is set to 1."
      },
      {
        "number": "8",
        "name": "Vcc",
        "type": "power_in",
        "description": "Power: device core power supply; for the IS25WP016D the stated operating range is 1.65V to 1.95V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package variant decoded from the ordering code IS25WP016D-JNLE: option J (standard), package N = 8-p; The pin-number-to-signal mapping for the 8-pin SOIC was inferred from the figure layout on page 7, b; Pin 7 is HOLD# by default and becomes RESET# only when the P7 bit of the Read Register is set. The d"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0664,
        "at": "2026-10-21T00:22:12"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923344238891008",
        "pages": 115,
        "sha256": "b7472bc6861b38f4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "is25wp016d-jnle.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "is25wp016d-jnle-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "632f9bd8765f7ddc229de50b223ee8264bddc75318c56b20790a30e3b3cfe34a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}