Generated by kicad-footprint-generator · KiCad file format 20260206
IS25LQ040B-JULE-TR
ISSI(Integrated Silicon Solution) · NOR FLASH · USON-8-EP(2x3)
IS25LQ040B-JULE-TR from ISSI(Integrated Silicon Solution), in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: high deselects the device and puts outputs in high impedance with low-power standby, low selects it, and CE# must go high-to-low after power-up before a new instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI (data shifted out on SCK falling edge) and bidirectional IO1 in Dual and Quad SPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect input that write-protects the Status Register bits when SRWD=1 and WP# is low, and serves as IO2 in Quad mode when QE=1, which disables the WP# function. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input in standard SPI (latched on SCK rising edge) and bidirectional IO0 in Dual and Quad SPI modes. |
| 6 | SCK | input | Serial Data Clock: synchronizes input and output timing, with input latched on the rising edge and output changing on the falling edge. |
| 7 | HOLD# (IO3) | bidirectional | Active-low Hold input that pauses serial communication while the device is selected, and serves as IO3 in Quad mode when QE=1, which disables the HOLD# function. |
| 8 | Vcc | power_in | Device core power supply, 2.3V to 3.6V operating range (3.0V typ). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature (Extended Grade E) | -40 | 105 | °C | Extended grade E | 54 | ||
| VCC Power Supply | VCC | 2.3 | 3 | 3.6 | V | Operating range | 54 |
| Storage Temperature | -65 | 150 | °C | 54 | |||
| VCC | VCC | -0.5 | 6 | V | 54 | ||
| Input Voltage with Respect to Ground on All Pins | -0.5 | V | Max is VCC + 0.5V | 54 | |||
| All Output Voltage with Respect to Ground | -0.5 | V | Max is VCC + 0.5V | 54 | |||
| Electrostatic Discharge Voltage (Human Body Model) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 54 | ||
| VCC Active Read current NORD at 33MHz | ICC1 | 5 | 11 | mA | NORD at 33MHz | 55 | |
| VCC Active Read current FRD Single at 104MHz | ICC1 | 7 | 12 | mA | FRD Single at 104MHz | 55 | |
| VCC Active Read current FRD Dual at 104MHz | ICC1 | 7 | 13 | mA | FRD Dual at 104MHz | 55 | |
| VCC Active Read current FRD Quad at 104MHz | ICC1 | 9 | 15 | mA | FRD Quad at 104MHz | 55 | |
| VCC Program Current 85°C | ICC2 | 20 | 25 | mA | CE# = VCC, 85°C | 55 | |
| VCC Program Current 105°C | ICC2 | 28 | mA | CE# = VCC, 105°C | 55 | ||
| VCC Program Current 125°C | ICC2 | 30 | mA | CE# = VCC, 125°C | 55 | ||
| VCC WRSR Current 85°C | ICC3 | 20 | 25 | mA | CE# = VCC, 85°C | 55 | |
| VCC WRSR Current 105°C | ICC3 | 28 | mA | CE# = VCC, 105°C | 55 | ||
| VCC WRSR Current 125°C | ICC3 | 30 | mA | CE# = VCC, 125°C | 55 | ||
| VCC Erase Current (SER/BER4K/BER64K) 85°C | ICC4 | 20 | 25 | mA | CE# = VCC, 85°C | 55 | |
| VCC Erase Current (SER/BER4K/BER64K) 105°C | ICC4 | 28 | mA | CE# = VCC, 105°C | 55 | ||
| VCC Erase Current (SER/BER4K/BER64K) 125°C | ICC4 | 30 | mA | CE# = VCC, 125°C | 55 | ||
| VCC Erase Current (CE) 85°C | ICC5 | 20 | 25 | mA | CE# = VCC, 85°C | 55 | |
| VCC Erase Current (CE) 105°C | ICC5 | 28 | mA | CE# = VCC, 105°C | 55 | ||
| VCC Erase Current (CE) 125°C | ICC5 | 30 | mA | CE# = VCC, 125°C | 55 | ||
| VCC Standby Current CMOS 85°C | ISB1 | 8 | 15 | µA | VCC = VMAX, CE# = VCC, 85°C | 55 | |
| VCC Standby Current CMOS 105°C | ISB1 | 20 | µA | VCC = VMAX, CE# = VCC, 105°C | 55 | ||
| VCC Standby Current CMOS 125°C | ISB1 | 30 | µA | VCC = VMAX, CE# = VCC, 125°C | 55 | ||
| Deep power down current 85°C | ISB2 | 5 | 7 | µA | VCC = VMAX, CE# = VCC, 85°C | 55 | |
| Deep power down current 105°C | ISB2 | 9 | µA | VCC = VMAX, CE# = VCC, 105°C | 55 | ||
| Deep power down current 125°C | ISB2 | 10 | µA | VCC = VMAX, CE# = VCC, 125°C | 55 | ||
| Input Leakage Current | ILI | 1 | µA | VIN = 0V to VCC | 55 | ||
| Output Leakage Current | ILO | 1 | µA | VIN = 0V to VCC | 55 | ||
| Input Low Voltage | VIL | -0.5 | V | 55 | |||
| Output Low Voltage | VOL | 0.2 | V | VMIN < VCC < VMAX, IOL = 100 µA | 55 | ||
| Input Capacitance (CE#, SCK) | CIN | 6 | pF | VIN = 0V | 56 | ||
| Input/Output Capacitance (other pins) | CIN/OUT | 8 | pF | VIN/OUT = 0V | 56 | ||
| Clock Frequency for fast read mode | fCT | 0 | 104 | MHz | 57 | ||
| Clock Frequency for read mode | fC | 0 | 33 | MHz | 57 | ||
| SCK High Time | tCKH | 4 | ns | 57 | |||
| SCK Low Time | tCKL | 4 | ns | 57 | |||
| CE# High Time | tCEH | 7 | ns | 57 | |||
| CE# Setup Time | tCS | 10 | ns | 57 | |||
| CE# Hold Time | tCH | 5 | ns | 57 | |||
| Data In Setup Time | tDS | 2 | ns | 57 | |||
| Data in Hold Time | tDH | 2 | ns | 57 | |||
| Output Valid | tV | 8 | ns | 57 | |||
| Output Hold Time | tOH | 2 | ns | 57 | |||
| Output Disable Time | tDIS | 8 | ns | 57 | |||
| HOLD Active Setup Time relative to SCK | tHLCH | 5 | ns | 57 | |||
| HOLD Active Hold Time relative to SCK | tCHHH | 5 | ns | 57 | |||
| HOLD Not Active Setup Time relative to SCK | tHHCH | 5 | ns | 57 | |||
| HOLD Not Active Hold Time relative to SCK | tCHHL | 5 | ns | 57 | |||
| HOLD to Output Low Z | tLZ | 12 | ns | 57 | |||
| HOLD to Output High Z | tHZ | 12 | ns | 57 | |||
| Sector Erase Time (4Kbyte) | tEC | 70 | 300 | ms | 57 | ||
| Block Erase Time (32Kbyte) | tEC | 130 | 500 | ms | 57 | ||
| Block Erase time (64Kbyte) | tEC | 200 | 1000 | ms | 57 | ||
| Chip Erase Time 4Mb | tEC | 1.5 | 3 | s | 4Mb | 57 | |
| Page Program Time Extended and Extended+ (E and E1) | tPP | 0.5 | 0.8 | ms | Extended and Extended+ (E and E1) | 57 | |
| Release deep power down | tres1 | 3 | µs | 57 | |||
| Deep power down | tDP | 3 | µs | 57 | |||
| Write Status Register time | tW | 2 | 10 | ms | 57 | ||
| Suspend to read ready | tSUS | 100 | µs | 57 | |||
| Software Reset cover time | tSRST | 100 | µs | 57 | |||
| Vcc(min) to CE# Low | tVCE | 1 | ms | 59 | |||
| Power-up time delay to write instruction | tPUW | 1 | 10 | ms | 59 | ||
| Write Inhibit Voltage | VWI | 2.1 | V | 59 |
CAD (KiCad official)
- Symbol:
IS25LQ040B-JULE-TR - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8-EP(2x3) (KiCad packages3D, STEP)
- 3D model files:
is25lq040b-jule-tr-etched.step/is25lq040b-jule-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25lq040b-jule-tr.step/is25lq040b-jule-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (69 pp, sha256
a9d669752a42c73e, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).