Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS25LQ040B-JULE-TR

ISSI(Integrated Silicon Solution) · NOR FLASH · USON-8-EP(2x3)

IS25LQ040B-JULE-TR from ISSI(Integrated Silicon Solution), in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: high deselects the device and puts outputs in high impedance with low-power standby, low selects it, and CE# must go high-to-low after power-up before a new instruction is accepted.
2 SO (IO1) bidirectional Serial Data Output in standard SPI (data shifted out on SCK falling edge) and bidirectional IO1 in Dual and Quad SPI modes.
3 WP# (IO2) bidirectional Write Protect input that write-protects the Status Register bits when SRWD=1 and WP# is low, and serves as IO2 in Quad mode when QE=1, which disables the WP# function.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input in standard SPI (latched on SCK rising edge) and bidirectional IO0 in Dual and Quad SPI modes.
6 SCK input Serial Data Clock: synchronizes input and output timing, with input latched on the rising edge and output changing on the falling edge.
7 HOLD# (IO3) bidirectional Active-low Hold input that pauses serial communication while the device is selected, and serves as IO3 in Quad mode when QE=1, which disables the HOLD# function.
8 Vcc power_in Device core power supply, 2.3V to 3.6V operating range (3.0V typ).
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package USON-8-EP(2x3)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature (Extended Grade E) -40 105 °C Extended grade E 54
VCC Power Supply VCC 2.3 3 3.6 V Operating range 54
Storage Temperature -65 150 °C 54
VCC VCC -0.5 6 V 54
Input Voltage with Respect to Ground on All Pins -0.5 V Max is VCC + 0.5V 54
All Output Voltage with Respect to Ground -0.5 V Max is VCC + 0.5V 54
Electrostatic Discharge Voltage (Human Body Model) -2000 2000 V ANSI/ESDA/JEDEC JS-001 54
VCC Active Read current NORD at 33MHz ICC1 5 11 mA NORD at 33MHz 55
VCC Active Read current FRD Single at 104MHz ICC1 7 12 mA FRD Single at 104MHz 55
VCC Active Read current FRD Dual at 104MHz ICC1 7 13 mA FRD Dual at 104MHz 55
VCC Active Read current FRD Quad at 104MHz ICC1 9 15 mA FRD Quad at 104MHz 55
VCC Program Current 85°C ICC2 20 25 mA CE# = VCC, 85°C 55
VCC Program Current 105°C ICC2 28 mA CE# = VCC, 105°C 55
VCC Program Current 125°C ICC2 30 mA CE# = VCC, 125°C 55
VCC WRSR Current 85°C ICC3 20 25 mA CE# = VCC, 85°C 55
VCC WRSR Current 105°C ICC3 28 mA CE# = VCC, 105°C 55
VCC WRSR Current 125°C ICC3 30 mA CE# = VCC, 125°C 55
VCC Erase Current (SER/BER4K/BER64K) 85°C ICC4 20 25 mA CE# = VCC, 85°C 55
VCC Erase Current (SER/BER4K/BER64K) 105°C ICC4 28 mA CE# = VCC, 105°C 55
VCC Erase Current (SER/BER4K/BER64K) 125°C ICC4 30 mA CE# = VCC, 125°C 55
VCC Erase Current (CE) 85°C ICC5 20 25 mA CE# = VCC, 85°C 55
VCC Erase Current (CE) 105°C ICC5 28 mA CE# = VCC, 105°C 55
VCC Erase Current (CE) 125°C ICC5 30 mA CE# = VCC, 125°C 55
VCC Standby Current CMOS 85°C ISB1 8 15 µA VCC = VMAX, CE# = VCC, 85°C 55
VCC Standby Current CMOS 105°C ISB1 20 µA VCC = VMAX, CE# = VCC, 105°C 55
VCC Standby Current CMOS 125°C ISB1 30 µA VCC = VMAX, CE# = VCC, 125°C 55
Deep power down current 85°C ISB2 5 7 µA VCC = VMAX, CE# = VCC, 85°C 55
Deep power down current 105°C ISB2 9 µA VCC = VMAX, CE# = VCC, 105°C 55
Deep power down current 125°C ISB2 10 µA VCC = VMAX, CE# = VCC, 125°C 55
Input Leakage Current ILI 1 µA VIN = 0V to VCC 55
Output Leakage Current ILO 1 µA VIN = 0V to VCC 55
Input Low Voltage VIL -0.5 V 55
Output Low Voltage VOL 0.2 V VMIN < VCC < VMAX, IOL = 100 µA 55
Input Capacitance (CE#, SCK) CIN 6 pF VIN = 0V 56
Input/Output Capacitance (other pins) CIN/OUT 8 pF VIN/OUT = 0V 56
Clock Frequency for fast read mode fCT 0 104 MHz 57
Clock Frequency for read mode fC 0 33 MHz 57
SCK High Time tCKH 4 ns 57
SCK Low Time tCKL 4 ns 57
CE# High Time tCEH 7 ns 57
CE# Setup Time tCS 10 ns 57
CE# Hold Time tCH 5 ns 57
Data In Setup Time tDS 2 ns 57
Data in Hold Time tDH 2 ns 57
Output Valid tV 8 ns 57
Output Hold Time tOH 2 ns 57
Output Disable Time tDIS 8 ns 57
HOLD Active Setup Time relative to SCK tHLCH 5 ns 57
HOLD Active Hold Time relative to SCK tCHHH 5 ns 57
HOLD Not Active Setup Time relative to SCK tHHCH 5 ns 57
HOLD Not Active Hold Time relative to SCK tCHHL 5 ns 57
HOLD to Output Low Z tLZ 12 ns 57
HOLD to Output High Z tHZ 12 ns 57
Sector Erase Time (4Kbyte) tEC 70 300 ms 57
Block Erase Time (32Kbyte) tEC 130 500 ms 57
Block Erase time (64Kbyte) tEC 200 1000 ms 57
Chip Erase Time 4Mb tEC 1.5 3 s 4Mb 57
Page Program Time Extended and Extended+ (E and E1) tPP 0.5 0.8 ms Extended and Extended+ (E and E1) 57
Release deep power down tres1 3 µs 57
Deep power down tDP 3 µs 57
Write Status Register time tW 2 10 ms 57
Suspend to read ready tSUS 100 µs 57
Software Reset cover time tSRST 100 µs 57
Vcc(min) to CE# Low tVCE 1 ms 59
Power-up time delay to write instruction tPUW 1 10 ms 59
Write Inhibit Voltage VWI 2.1 V 59

CAD (KiCad official)

  • Symbol: IS25LQ040B-JULE-TR
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: USON-8-EP(2x3) (KiCad packages3D, STEP)
  • 3D model files: is25lq040b-jule-tr-etched.step / is25lq040b-jule-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lq040b-jule-tr.step / is25lq040b-jule-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (69 pp, sha256 a9d669752a42c73e, retrieved 2026-11-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF