IS25LP128F-JBLA3

{
  "slug": "is25lp128f-jbla3",
  "version": "0.1.0",
  "type": "component",
  "description": "ISSI Integrated Silicon Solution NOR FLASH, SOIC-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "is25lp128f-jbla3",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "is25lp128f-jbla3.kicad_sym",
    "is25lp128f-jbla3.kicad_mod",
    "is25lp128f-jbla3.glb",
    "is25lp128f-jbla3.step",
    "is25lp128f-jbla3.lbr",
    "docs/hero.png",
    "docs/is25lp128f-jbla3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "is25lp128f-jbla3-hero.glb",
    "is25lp128f-jbla3-hero.overlay.json",
    "is25lp128f-jbla3-etched.glb"
  ],
  "component": {
    "mpn": "IS25LP128F-JBLA3",
    "manufacturer": "ISSI Integrated Silicon Solution",
    "package": "SOIC-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953681282260992",
    "parts": {
      "symbol": "is25lp128f-jbla3.kicad_sym",
      "footprint": "is25lp128f-jbla3.kicad_mod",
      "model_3d": "is25lp128f-jbla3-hero.glb",
      "model_3d_plain": "is25lp128f-jbla3-etched.glb",
      "model_3d_step": "is25lp128f-jbla3-etched.step",
      "model_3d_step_plain": "is25lp128f-jbla3.step",
      "lbr": "is25lp128f-jbla3.lbr"
    },
    "distributor_links": {
      "lcsc": "C1236837"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T22:20:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE#",
        "type": "input",
        "description": "Chip Enable: when CE# is high the device is deselected, outputs are high-impedance and the device enters its low-power standby state, and CE# must go high-to-low before a new instruction is accepted after power-up."
      },
      {
        "number": "2",
        "name": "SO (IO1)",
        "type": "bidirectional",
        "description": "Serial Data Output (IO1): in standard SPI it is a unidirectional output that changes on the falling edge of SCK, and in Dual/Quad SPI it becomes a bidirectional IO that is written on the rising edge and read on the falling edge of SCK."
      },
      {
        "number": "3",
        "name": "WP# (IO2)",
        "type": "bidirectional",
        "description": "Write Protect/Serial Data IO (IO2): with SRWD set to 1 and WP# pulled low, the Status Register bits (SRWD, QE, BP3-BP0) are write-protected, and when QE is set to 1 this pin is used as IO2 and the WP# function is unavailable."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground: connect to ground when referenced to Vcc."
      },
      {
        "number": "5",
        "name": "SI (IO0)",
        "type": "bidirectional",
        "description": "Serial Data Input (IO0): in standard SPI it is a unidirectional input latched on the rising edge of SCK, and in Dual/Quad SPI it becomes a bidirectional IO that is written on the rising edge and read on the falling edge of SCK."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Data Clock: synchronized clock for input and output timing operations."
      },
      {
        "number": "7",
        "name": "HOLD# or RESET# (IO3)",
        "type": "bidirectional",
        "description": "HOLD# or RESET#/Serial Data IO (IO3): when QE=0 the pin acts as HOLD# (active low, pausing serial communication without resetting the sequence, default) or RESET# as selected by the P7 bit of the Read Register, and when QE=1 it becomes IO3."
      },
      {
        "number": "8",
        "name": "Vcc",
        "type": "power_in",
        "description": "Power: device core power supply."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 8-pin SOIC 208mil pin numbers were inferred from the garbled text extraction of the page 7 pin-c; Pin 7 is labeled HOLD# or RESET# (IO3); the default function is HOLD# per page 8 note 1, and the RES; The page 10 Vcc description gives no voltage limits. The supply range for the IS25LP (this MPN's 25L",
          "1/8 pins cited to the wrong page (name found elsewhere): ['6:SCK@p10']"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0672,
        "at": "2026-10-18T22:20:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953681282260992",
        "pages": 180,
        "sha256": "8eee02b03531933f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "is25lp128f-jbla3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "is25lp128f-jbla3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f9dcb71b1a700d573d306a2539106ee20ecf490aa3b9af69ae68075ce7c33f35",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}