IS25LP016D-JLLE

{
  "slug": "is25lp016d-jlle",
  "version": "0.1.0",
  "type": "component",
  "description": "ISSI(Integrated Silicon Solution) NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "is25lp016d-jlle",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "is25lp016d-jlle.kicad_sym",
    "is25lp016d-jlle.kicad_mod",
    "is25lp016d-jlle.glb",
    "is25lp016d-jlle.step",
    "is25lp016d-jlle.lbr",
    "docs/hero.png",
    "docs/is25lp016d-jlle-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "is25lp016d-jlle-hero.glb",
    "is25lp016d-jlle-hero.overlay.json",
    "is25lp016d-jlle-etched.glb"
  ],
  "component": {
    "mpn": "IS25LP016D-JLLE",
    "manufacturer": "ISSI(Integrated Silicon Solution)",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/593dfd167a26404a46ddcaf58f77094a.pdf",
    "parts": {
      "symbol": "is25lp016d-jlle.kicad_sym",
      "footprint": "is25lp016d-jlle.kicad_mod",
      "model_3d": "is25lp016d-jlle-hero.glb",
      "model_3d_plain": "is25lp016d-jlle-etched.glb",
      "model_3d_step": "is25lp016d-jlle-etched.step",
      "model_3d_step_plain": "is25lp016d-jlle.step",
      "lbr": "is25lp016d-jlle.lbr"
    },
    "distributor_links": {
      "lcsc": "C3033374",
      "digikey": "706-IS25LP016D-JLLE-ND",
      "mouser": "870-IS25LP016D-JLLE"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:23:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "706-IS25LP016D-JLLE-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "870-IS25LP016D-JLLE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE#",
        "type": "input",
        "description": "Chip Enable input: driving it high deselects the device and puts outputs in high impedance, and after power-up CE# must transition from high to low before a new instruction is accepted."
      },
      {
        "number": "2",
        "name": "SO (IO1)",
        "type": "bidirectional",
        "description": "Serial Data Output in standard SPI, read on the falling edge of SCK, and bidirectional IO1 in Dual and Quad SPI modes; SO goes high impedance when HOLD# is low while CE# is low."
      },
      {
        "number": "3",
        "name": "WP# (IO2)",
        "type": "bidirectional",
        "description": "Write Protect input that, together with the SRWD bit, write-protects the Status Register when pulled low, and becomes bidirectional IO2 when the QE bit is set to 1."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground: connect to ground when referenced to Vcc."
      },
      {
        "number": "5",
        "name": "SI (IO0)",
        "type": "bidirectional",
        "description": "Serial Data Input in standard SPI, latched on the rising edge of SCK, and bidirectional IO0 in Dual and Quad SPI modes."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Data Clock input that synchronizes input and output timing; the device supports SPI modes 0 (0,0) and 3 (1,1)."
      },
      {
        "number": "7",
        "name": "HOLD# or RESET# (IO3)",
        "type": "bidirectional",
        "description": "HOLD# is active low and pauses serial communication while CE# is low (default, P7=0), RESET# is selected by P7=1 when QE=0, and the pin becomes IO3 when QE=1."
      },
      {
        "number": "8",
        "name": "Vcc",
        "type": "power_in",
        "description": "Device core power supply; the IS25LP part operates from 2.30V to 3.60V."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mismatch: the requested hint is WSON-8-EP(6x8), but the MPN suffix 'L' maps to 8-contact WSO; Pin numbering for the 8-pin WSON was taken from the package figure on page 7, whose text extraction ; Pin 7 is HOLD# by default (P7=0) and RESET# only if P7=1 with QE=0. The MPN option 'J' is the standa",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0704,
        "at": "2026-10-30T17:22:50"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/593dfd167a26404a46ddcaf58f77094a.pdf",
        "pages": 115,
        "sha256": "b7472bc6861b38f4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "is25lp016d-jlle.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ba395667aaa116bfeab27d7a8eee41f602f1962244ed603a03cb3a53a5fd4d8c",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "is25lp016d-jlle-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d75a7f1cca116be374362743378ef27389752ef4f736d9e0bdbb52f4fdba0b8",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}