main
Ray Publish 0.1.0 a4efea5
{
  "slug": "ir2110str",
  "version": "0.1.0",
  "type": "component",
  "description": "UMW Gate Drive ICs, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "ir2110str",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ir2110str.kicad_sym",
    "ir2110str.kicad_mod",
    "ir2110str.glb",
    "ir2110str.step",
    "ir2110str.lbr",
    "docs/hero.png",
    "docs/ir2110str-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ir2110str-hero.glb",
    "ir2110str-hero.overlay.json"
  ],
  "component": {
    "mpn": "IR2110STR",
    "land_source": "kicad",
    "land_note": "UMW prints no land pattern (p.10 is the outline only). Land = KiCad Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm (JEDEC MS-013AA, IPC nominal): 16 pads 2.05 x 0.6 at x +/-4.65, pitch 1.27, which covers UMW's foot (E/2 5.05-5.25, L 0.60-1.00). Not SOIC-16W_7.5x12.8mm_P1.27mm (12.8 mm long body).",
    "manufacturer": "UMW",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Power Management",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/852037e9fc9e5a825f5aa813f8b08f0c.pdf",
    "parts": {
      "symbol": "ir2110str.kicad_sym",
      "footprint": "ir2110str.kicad_mod",
      "model_3d": "ir2110str-hero.glb",
      "model_3d_plain": "ir2110str.glb",
      "model_3d_step": "ir2110str-etched.step",
      "model_3d_step_plain": "ir2110str.step",
      "lbr": "ir2110str.lbr"
    },
    "distributor_links": {
      "lcsc": "C20623179"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T23:56:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LO",
        "type": "output",
        "description": "Low-side gate drive output, which swings between COM and VCC (recommended VLO 0 V to VCC) and is rated 4 A source / 4 A sink typical."
      },
      {
        "number": "2",
        "name": "COM",
        "type": "power_in",
        "description": "Low-side return for the LO gate driver; the datasheet gives no separate voltage limit for this pin."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Low-side and main power supply, recommended 10 V to 20 V relative to VSS."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "6",
        "name": "VS",
        "type": "power_in",
        "description": "High-side floating supply return, recommended -9 V to 600 V (allowable negative transient -9 V)."
      },
      {
        "number": "7",
        "name": "VB",
        "type": "power_in",
        "description": "High-side floating supply, recommended VS+10 V to VS+20 V."
      },
      {
        "number": "8",
        "name": "HO",
        "type": "output",
        "description": "High-side gate drive output, referenced to VS and swinging between VS and VB, rated 4 A source / 4 A sink typical."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply, recommended VSS+3 V to VSS+20 V."
      },
      {
        "number": "12",
        "name": "HIN",
        "type": "input",
        "description": "Logic input for the high-side gate driver output (HO), in phase, with recommended input range 0 V to VCC; inputs shorter than 1 µs are not transmitted normally."
      },
      {
        "number": "13",
        "name": "SD",
        "type": "input",
        "description": "Logic input for shutdown, which performs cycle-by-cycle edge-triggered shutdown of both outputs."
      },
      {
        "number": "14",
        "name": "LIN",
        "type": "input",
        "description": "Logic input for the low-side gate driver output (LO), in phase, with recommended input range 0 V to VCC; inputs shorter than 1 µs are not transmitted normally."
      },
      {
        "number": "15",
        "name": "VSS",
        "type": "power_in",
        "description": "Logic ground, which may be offset from COM by -5 V to +5 V."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers for the connected pins come from the Table 6-1 lead definitions, which pair each number ; These pins are marked NC in the lead-definition table. The page-3 diagram text places NC on differen; Voltage limits come from the recommended operating conditions table (page 5). The absolute maximum t"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0707,
        "at": "2026-11-12T23:56:18"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/852037e9fc9e5a825f5aa813f8b08f0c.pdf",
        "pages": 12,
        "sha256": "f5a12d65bdf6db5d",
        "source_tier": "lcsc"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "SOIC",
        "height_mm": 2.65,
        "height_basis": "datasheet A, max",
        "standoff_mm": 0.175,
        "standoff_basis": "datasheet A1, nominal",
        "lead_width_mm": 0.36,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 1.27 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.2,
        "lead_thickness_basis": "default for pitch 1.27 mm, height 2.65 mm (no datasheet c read)"
      },
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ir2110str.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.325,
          2.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a6985495ce8f81867b104fd7da58b21d99337a51f0624b1b3054cabb31b5b97b",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ir2110str-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.325,
          2.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e19b281cb3879ff41518474a9267288ae87052e9a213a2bf4a1d3ed6f0589e22",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOP-16-300mil (wide-body SOIC-16, JEDEC MS-013AA outline)",
      "source_page": 10,
      "D": {
        "nom_mm": 10.325,
        "range_mm": [
          10.2,
          10.45
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.3,
          7.7
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "A": {
        "nom_mm": 2.59,
        "range_mm": [
          null,
          2.59
        ]
      },
      "source": "reviewer dims decision (part-reviewer (ray review, g3 package review of ir2110str), ir2110str.dims.json)",
      "model_check": {
        "file": "ir2110str.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}