Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IR2110STR

UMW · Gate Drive ICs · SOP-16-300mil

IR2110STR from UMW, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 LO output Low-side gate drive output, which swings between COM and VCC (recommended VLO 0 V to VCC) and is rated 4 A source / 4 A sink typical.
2 COM power_in Low-side return for the LO gate driver; the datasheet gives no separate voltage limit for this pin.
3 VCC power_in Low-side and main power supply, recommended 10 V to 20 V relative to VSS.
4 NC unconnected Not connected.
5 NC unconnected Not connected.
6 VS power_in High-side floating supply return, recommended -9 V to 600 V (allowable negative transient -9 V).
7 VB power_in High-side floating supply, recommended VS+10 V to VS+20 V.
8 HO output High-side gate drive output, referenced to VS and swinging between VS and VB, rated 4 A source / 4 A sink typical.
9 NC unconnected Not connected.
10 NC unconnected Not connected.
11 VDD power_in Logic supply, recommended VSS+3 V to VSS+20 V.
12 HIN input Logic input for the high-side gate driver output (HO), in phase, with recommended input range 0 V to VCC; inputs shorter than 1 µs are not transmitted normally.
13 SD input Logic input for shutdown, which performs cycle-by-cycle edge-triggered shutdown of both outputs.
14 LIN input Logic input for the low-side gate driver output (LO), in phase, with recommended input range 0 V to VCC; inputs shorter than 1 µs are not transmitted normally.
15 VSS power_in Logic ground, which may be offset from COM by -5 V to +5 V.
16 NC unconnected Not connected.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-16-300mil
Category Power Management
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High side floating supply return voltage (VS), recommended operating VS -9 600 V 5
Low side and main power supply (VCC), recommended operating VCC 10 20 V 5
Low side gate drive output (VLO), recommended operating VLO 0 V 5
Logic ground (VSS), recommended operating VSS -5 5 V 5
Logic input of HIN & LIN (VIN), recommended operating VIN 0 V 5
Ambient temperature (TA), recommended operating TA -40 125 °C 5
High side floating supply (VB), absolute maximum VB -0.3 625 V 4
Low side and main power supply (VCC), absolute maximum VCC -0.3 25 V 4
Low side gate drive output (VLO), absolute maximum VLO -0.3 V 4
Logic supply (VDD), absolute maximum VDD -0.3 V 4
Logic input of HIN & LIN (VIN), absolute maximum VIN -0.3 V 4
Allowable offset supply voltage transient (dVS/dt), absolute maximum dVS/dt 50 V/ns 4
HBM ESD model, absolute maximum ESD 1500 V HBM model 4
Machine ESD model, absolute maximum ESD 500 V Machine model 4
Package power dissipation, absolute maximum PD 625 mW @ TA ≤25°C 4
Thermal resistance, junction to ambient (RthJA) RthJA 200 W/°C 4
Junction temperature (TJ), absolute maximum TJ 150 °C 4
Storage temperature (TS), absolute maximum TS -55 150 °C 4
Lead temperature (TL), soldering, absolute maximum TL 300 °C Soldering, 10 seconds 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: IR2110STR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOP-16-300mil, generated on the KiCad land (body 7.5 x 10.325 mm, terminals on the pads, 2.65 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ir2110str-etched.step / ir2110str-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ir2110str.step / ir2110str.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (12 pp, sha256 f5a12d65bdf6db5d, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF