component
IP101GA
Public Made by Adomby adom
IC Plus Ethernet Transceivers, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
ip101ga: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
a879caa
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447
{
"schema_version": 1,
"type": "component",
"slug": "ip101ga",
"title": "IP101GA",
"brief": "IC Plus Ethernet Transceivers, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"ip101ga",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "IP101GA",
"manufacturer": "IC Plus",
"package": "LQFP-48(7x7)",
"pin_count": 48,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884323458027520",
"parts": {
"symbol": "ip101ga.kicad_sym",
"footprint": "ip101ga.kicad_mod",
"model_3d": "ip101ga-etched.glb",
"model_3d_plain": "ip101ga.glb",
"model_3d_step": "ip101ga-etched.step",
"model_3d_step_plain": "ip101ga.step",
"lbr": "ip101ga.lbr"
},
"distributor_links": {
"lcsc": "C336124"
},
"pins": [
{
"number": "1",
"name": "COL/RMII",
"type": "output",
"description": "Collision detection output (active high) or RMII mode selection latched during power-on reset (0=MII, 1=RMII mode)."
},
{
"number": "2",
"name": "TXEN",
"type": "input",
"description": "Transmit enable input, active high to enable transmission; synchronous with TXCLK."
},
{
"number": "3",
"name": "TXD3",
"type": "input",
"description": "Transmit data bit 3, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."
},
{
"number": "4",
"name": "TXD2",
"type": "input",
"description": "Transmit data bit 2, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."
},
{
"number": "5",
"name": "TXD1",
"type": "input",
"description": "Transmit data bit 1, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."
},
{
"number": "6",
"name": "TXD0",
"type": "input",
"description": "Transmit data bit 0, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."
},
{
"number": "7",
"name": "TXCLK/50M_CLKI",
"type": "bidirectional",
"description": "Transmit clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock input required in RMII mode."
},
{
"number": "8",
"name": "REGOUT",
"type": "power_in",
"description": "1.0V regulated output for internal use; requires 10µF and 0.1µF decoupling capacitors for noise filtering."
},
{
"number": "9",
"name": "LED0/PHY_AD0",
"type": "output",
"description": "LED0 output or PHY address bit 0 latched during power-on reset; high impedance reset state."
},
{
"number": "10",
"name": "LED1/PHY_AD1",
"type": "output",
"description": "LED1 output or PHY address bit 1 latched during power-on reset; high impedance reset state."
},
{
"number": "11",
"name": "DGND",
"type": "power_in",
"description": "Ground connection for digital circuits."
},
{
"number": "12",
"name": "LED2/PHY_AD2",
"type": "output",
"description": "LED2 output or PHY address bit 2 latched during power-on reset; high impedance reset state."
},
{
"number": "13",
"name": "LED3/PHY_AD3",
"type": "output",
"description": "LED3 output or PHY address bit 3 latched during power-on reset; internal pull-down, high impedance reset state."
},
{
"number": "14",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V or 2.5V digital I/O power supply for LED, RESET_N and MII/RMII interface signals."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "16",
"name": "RXCLK/50M_CLKO",
"type": "output",
"description": "Receive clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock output in RMII mode."
},
{
"number": "17",
"name": "DGND",
"type": "power_in",
"description": "Ground connection for digital circuits."
},
{
"number": "18",
"name": "RXD3",
"type": "output",
"description": "Receive data bit 3 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."
},
{
"number": "19",
"name": "RXD2",
"type": "output",
"description": "Receive data bit 2 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."
},
{
"number": "20",
"name": "RXD1",
"type": "output",
"description": "Receive data bit 1 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."
},
{
"number": "21",
"name": "RXD0",
"type": "output",
"description": "Receive data bit 0 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."
},
{
"number": "22",
"name": "RXDV/CRS_DV/FX_HEN",
"type": "output",
"description": "Receive data valid (MII), carrier sense and receive data valid (RMII), or fiber mode select latched during reset (0=TP, 1=fiber); internal pull-down."
},
{
"number": "23",
"name": "CRS/LEDMOD",
"type": "output",
"description": "Carrier sense output or LED mode selection latched during reset (0=LED mode 1, 1=LED mode 2); internal pull-down."
},
{
"number": "24",
"name": "RXER",
"type": "output",
"description": "Receive error output (high impedance reset state); asserted when decoding error detected or PHY receiving LPI signal."
},
{
"number": "25",
"name": "MDC",
"type": "input",
"description": "Management data clock input for serial management interface; maximum clock frequency 2.5MHz."
},
{
"number": "26",
"name": "MDIO",
"type": "bidirectional",
"description": "Management data input/output for serial management interface; integrated 250kΩ pull-up resistor."
},
{
"number": "27",
"name": "TEST_ON",
"type": "input",
"description": "Test mode enable input with internal pull-down; set high to enable test mode; leave floating for normal operation."
},
{
"number": "28",
"name": "ISET",
"type": "input",
"description": "Bandgap circuit current set input; connect to GND via 6.19kΩ ±1% resistor to define internal reference current."
},
{
"number": "29",
"name": "AGND1V",
"type": "power_in",
"description": "1.0V analog circuit ground connection."
},
{
"number": "30",
"name": "MDI_RN",
"type": "bidirectional",
"description": "Receive differential pair negative input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes."
},
{
"number": "31",
"name": "MDI_RP",
"type": "bidirectional",
"description": "Receive differential pair positive input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "33",
"name": "MDI_TN",
"type": "bidirectional",
"description": "Transmit differential pair negative, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output."
},
{
"number": "34",
"name": "MDI_TP",
"type": "bidirectional",
"description": "Transmit differential pair positive, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output."
},
{
"number": "35",
"name": "AGND33",
"type": "power_in",
"description": "3.3V analog circuit ground connection."
},
{
"number": "36",
"name": "AVDD33",
"type": "power_in",
"description": "3.3V analog power supply for analog circuitry; requires careful decoupling and placed close to chip."
},
{
"number": "37",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "38",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "39",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "40",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "41",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "42",
"name": "RESET_N",
"type": "input",
"description": "Active-low reset input with internal pull-up; 25MHz clock must be active 10 cycles before rising edge; device operational 2.5ms after reset release."
},
{
"number": "43",
"name": "TXER/FXSD",
"type": "input",
"description": "Transmit error input (TP mode) with internal pull-down; fiber signal detect (fiber mode, 0=down, 1=up); must float or connect to GND in RMII mode."
},
{
"number": "44",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "45",
"name": "DGND",
"type": "power_in",
"description": "Ground connection for digital circuits."
},
{
"number": "46",
"name": "X1",
"type": "input",
"description": "25MHz crystal oscillator input or external 25MHz clock input; connect to GND if using external 50MHz clock on TXCLK/50M_CLKI."
},
{
"number": "47",
"name": "X2",
"type": "output",
"description": "25MHz crystal oscillator output; leave open when using external oscillator on X1."
},
{
"number": "48",
"name": "INTR",
"type": "tri_state",
"description": "Open-drain programmable interrupt output for link status, speed, duplex changes or RX error countdown; requires external pull-up resistor."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pins 15, 37-41, and 44 marked as NC are inferred from package layout and process of elimination as t; Pins with latched-in functions during reset (pins 1, 9, 10, 12, 13, 22, 23) are dual-function pins t; Pin 43 (TXER/FXSD) has mode-dependent function (TP vs fiber) and requires special handling in RMII m"
],
"pages_sent": 65,
"cost_usd": 0.9663,
"at": "2026-09-22T12:51:03"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884323458027520",
"pages": 65,
"sha256": "2398538332fea519",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ip101ga.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ip101ga-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d463310d5dcb0788be3670a4359e39afbcc598e0c6f391bd036d0e776611ef10",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "IC Plus",
"Package": "LQFP-48(7x7)",
"Category": "Interface",
"Pins": "48"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ip101ga"
],
"discovery_pitch": "IP101GA (IC Plus) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ip101ga.kicad_sym",
"ip101ga.kicad_mod",
"ip101ga.glb",
"ip101ga.step",
"ip101ga.lbr",
"docs/hero.png",
"docs/ip101ga-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T22:45:05.815Z"
}