main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina823dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina823dgkr: viewers · Ray
ina823dgkr-etched.fit.json ina823dgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina823dgkr-etched.glb ina823dgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
ina823dgkr-etched.step ina823dgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
ina823dgkr.glb Publish 0.1.0 · Ray
ina823dgkr.kicad_mod Publish 0.1.0 · Ray
ina823dgkr.kicad_sym Publish 0.1.0 · Ray
ina823dgkr.lbr Publish 0.1.0 · Ray
ina823dgkr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ina823dgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
README.md ina823dgkr: specified limits as data (metadata.characteristics, 44 rows from the datasheet) · Ray

INA823DGKR

Texas Instruments · Instrumentation Amplifiers · MSOP-8

INA823DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain-setting pin. Place an external gain resistor R_G between pin 1 and pin 8; gain is set by G = 1 + 100 kΩ / R_G (range G = 1 to 10,000).
2 -IN input Negative (inverting) instrumentation amplifier input. Input overvoltage protection to ±60 V; usable input range extends 150 mV below the negative supply.
3 +IN input Positive (noninverting) instrumentation amplifier input. Input overvoltage protection to ±60 V; usable input range extends 150 mV below the negative supply.
4 -VS power_in Negative supply rail. Single-supply operation uses -VS = GND with +VS = 2.7 V to 36 V; dual-supply operation uses ±1.35 V to ±18 V.
5 REF input Reference input that sets the output common-mode voltage. Must be driven by a low-impedance source; input impedance is 100 kΩ and reference gain to output is 1 V/V.
6 OUT output Amplifier output. Output swings to within 0.15 V of each supply rail; short-circuit current is continuous to V_S / 2 (typ ±20 mA).
7 +VS power_in Positive supply rail. Single-supply 2.7 V to 36 V, or dual-supply ±1.35 V to ±18 V. Quiescent current is 180 µA (typ).
8 RG passive Gain-setting pin. Place an external gain resistor R_G between pin 1 and pin 8; gain is set by G = 1 + 100 kΩ / R_G.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • INA823DGKR
  • INA823DGKRD
  • INA823DGKRDR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, dual supply (absolute maximum) VS 20 V Dual supply, VS = (+VS) – (–VS); printed as ± 20 4
Supply voltage, single supply (absolute maximum) VS 40 V Single supply, VS = (+VS) 4
RG pins current -10 10 mA 4
OUT pin current -50 50 mA 4
Operating temperature TA -50 150 °C 4
Junction temperature TJ 175 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage, single supply (recommended) VS 2.7 36 V Single supply, VS = (+VS) 4
Supply voltage, dual supply (recommended) VS 1.35 18 V Dual supply, VS = (+VS) – (–VS); printed as ±1.35 V to ±18 V 4
Specified temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance (DGK, VSSOP) RθJA 167.5 °C/W DGK (VSSOP) 8-pin 4
Junction-to-case (top) thermal resistance (DGK, VSSOP) RθJC(top) 60.3 °C/W DGK (VSSOP) 8-pin 4
Junction-to-board thermal resistance (DGK, VSSOP) RθJB 88.7 °C/W DGK (VSSOP) 8-pin 4
Junction-to-top characterization parameter (DGK, VSSOP) ψJT 7.9 °C/W DGK (VSSOP) 8-pin 4
Junction-to-board characterization parameter (DGK, VSSOP) ψJB 87.1 °C/W DGK (VSSOP) 8-pin 4
Input stage offset voltage VOSI 20 100 µV 5
Input stage offset voltage over temperature VOSI 190 µV TA = –40°C to +125°C 5
Input stage offset voltage drift 0.2 1.2 µV/°C 5
Output stage offset voltage VOSO 140 450 µV 5
Output stage offset voltage over temperature VOSO 850 µV TA = –40°C to +125°C 5
Output stage offset voltage drift 1 5 µV/°C 5
Power-supply rejection ratio, G = 1 PSRR 100 130 dB VS = ±1.35 V to ±18 V, G = 1, RTI 5
Power-supply rejection ratio, G = 10 PSRR 115 148 dB VS = ±1.35 V to ±18 V, G = 10, RTI 5
Power-supply rejection ratio, G = 100 PSRR 120 148 dB VS = ±1.35 V to ±18 V, G = 100, RTI 5
Power-supply rejection ratio, G = 1000 PSRR 120 148 dB VS = ±1.35 V to ±18 V, G = 1000, RTI 5
Input overvoltage -60 60 V TA = –40°C to +125°C 5
Common-mode rejection ratio, G = 1 CMRR 84 110 dB At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G = 1 5
Common-mode rejection ratio, G = 10 CMRR 104 136 dB At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G = 10 5
Common-mode rejection ratio, G ≥ 100 CMRR 120 149 dB At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G ≥ 100 5
Input bias current IB 1.2 8 nA 5
Input offset current IOS 0.4 4 nA 5
Gain range G 1 10000 V/V 6
Gain error, G = 1 GE -0.04 0.01 0.04 % VO = ±10 V, G = 1 6
Gain error, G = 10 GE -0.2 0.025 0.2 % VO = ±10 V, G = 10 6
Gain error, G = 100 GE -0.2 0.025 0.2 % VO = ±10 V, G = 100 6
Gain error, G = 1000 GE -0.2 0.05 0.2 % VO = ±10 V, G = 1000 6
Gain drift, G = 1 -5 0.2 5 ppm/°C TA = –40°C to +125°C, G = 1 6
Gain drift, G > 1 -35 12 35 ppm/°C TA = –40°C to +125°C, G > 1 (excludes RG) 6
Gain nonlinearity, G = 1 to 10 2 10 ppm G = 1 to 10 6
Short-circuit current ISC -20 20 mA Continuous to VS / 2 6
Load capacitance 1000 pF Stable operation 6
Reference gain error 0.01 0.05 % Inside the output voltage swing 6
Quiescent current IQ 180 250 µA VIN = 0 V 6
Quiescent current over temperature IQ 300 µA TA = –40°C to +125°C 6

CAD (KiCad official)

  • Symbol: INA823DGKR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina823dgkr-etched.step / ina823dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina823dgkr.step / ina823dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 cb9223248a51774c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF